Soon, all Red Hat OpenShift documentation will only be available on docs.redhat.com, the official location of all Red Hat product documentation. Get familiar with the updated experience today!
  1. Documentation
    2. history
×

Observing the network traffic

Observing the network traffic from the Overview view

The Overview view displays the overall aggregated metrics of the network traffic flow on the cluster. As an administrator, you can monitor the statistics with the available display options.

Working with the Overview view

As an administrator, you can navigate to the Overview view to see the graphical representation of the flow rate statistics.

Procedure

  1. Navigate to Observe → Network Traffic.

  2. In the Network Traffic page, click the Overview tab.

You can configure the scope of each flow rate data by clicking the menu icon.

Configuring advanced options for the Overview view

You can customize the graphical view by using advanced options. To access the advanced options, click Show advanced options.You can configure the details in the graph by using the Display options drop-down menu. The options available are:

  • Metric type: The metrics to be shown in Bytes or Packets. The default value is Bytes.

  • Scope: To select the detail of components between which the network traffic flows. You can set the scope to Node, Namespace, Owner, or Resource. Owner is an aggregation of resources. Resource can be a pod, service, node, in case of host-network traffic, or an unknown IP address. The default value is Namespace.

  • Truncate labels: Select the required width of the label from the drop-down list. The default value is M.

Managing panels

You can select the required statistics to be displayed, and reorder them. To manage columns, click Manage panels.

DNS tracking

You can configure graphical representation of Domain Name System (DNS) tracking of network flows in the Overview view. Using DNS tracking with extended Berkeley Packet Filter (eBPF) tracepoint hooks can serve various purposes:

  • Network Monitoring: Gain insights into DNS queries and responses, helping network administrators identify unusual patterns, potential bottlenecks, or performance issues.

  • Security Analysis: Detect suspicious DNS activities, such as domain name generation algorithms (DGA) used by malware, or identify unauthorized DNS resolutions that might indicate a security breach.

  • Troubleshooting: Debug DNS-related issues by tracing DNS resolution steps, tracking latency, and identifying misconfigurations.

When DNS tracking is enabled, you can see the following metrics represented in a chart in the Overview. See the Additional Resources in this section for more information about enabling and working with this view.

  • Top 5 average DNS latencies

  • Top 5 DNS response code

  • Top 5 DNS response code stacked with total

This feature is supported for IPv4 and IPv6 UDP protocol.

Additional resources

Observing the network traffic from the Traffic flows view

The Traffic flows view displays the data of the network flows and the amount of traffic in a table. As an administrator, you can monitor the amount of traffic across the application by using the traffic flow table.

Working with the Traffic flows view

As an administrator, you can navigate to Traffic flows table to see network flow information.

Procedure

  1. Navigate to Observe → Network Traffic.

  2. In the Network Traffic page, click the Traffic flows tab.

You can click on each row to get the corresponding flow information.

Configuring advanced options for the Traffic flows view

You can customize and export the view by using Show advanced options. You can set the row size by using the Display options drop-down menu. The default value is Normal.

Managing columns

You can select the required columns to be displayed, and reorder them. To manage columns, click Manage columns.

Exporting the traffic flow data

You can export data from the Traffic flows view.

Procedure

  1. Click Export data.

  2. In the pop-up window, you can select the Export all data checkbox to export all the data, and clear the checkbox to select the required fields to be exported.

  3. Click Export.

Working with conversation tracking

As an administrator, you can you can group network flows that are part of the same conversation. A conversation is defined as a grouping of peers that are identified by their IP addresses, ports, and protocols, resulting in an unique Conversation Id. You can query conversation events in the web console. These events are represented in the web console as follows:

  • Conversation start: This event happens when a connection is starting or TCP flag intercepted

  • Conversation tick: This event happens at each specified interval defined in the FlowCollector spec.processor.conversationHeartbeatInterval parameter while the connection is active.

  • Conversation end: This event happens when the FlowCollector spec.processor.conversationEndTimeout parameter is reached or the TCP flag is intercepted.

  • Flow: This is the network traffic flow that occurs within the specified interval.

Procedure

  1. In the web console, navigate to Operators → Installed Operators.

  2. Under the Provided APIs heading for the NetObserv Operator, select Flow Collector.

  3. Select cluster then select the YAML tab.

  4. Configure the FlowCollector custom resource so that spec.processor.logTypes, conversationEndTimeout, and conversationHeartbeatInterval parameters are set according to your observation needs. A sample configuration is as follows:

    Configure FlowCollector for conversation tracking
    apiVersion: flows.netobserv.io/v1alpha1
kind: FlowCollector
metadata:
  name: cluster
spec:
 processor:
  conversationEndTimeout: 10s                  (1)
  logTypes: FLOWS                              (2)
  conversationHeartbeatInterval: 30s           (3)
    1 The Conversation end event represents the point when the conversationEndTimeout is reached or the TCP flag is intercepted.
    2 When logTypes is set to FLOWS, only the Flow event is exported. If you set the value to ALL, both conversation and flow events are exported and visible in the Network Traffic page. To focus only on conversation events, you can specify CONVERSATIONS which exports the Conversation start, Conversation tick and Conversation end events; or ENDED_CONVERSATIONS exports only the Conversation end events. Storage requirements are highest for ALL and lowest for ENDED_CONVERSATIONS.
    3 The Conversation tick event represents each specified interval defined in the FlowCollector conversationHeartbeatInterval parameter while the network connection is active.

    If you update the logType option, the flows from the previous selection do not clear from the console plugin. For example, if you initially set logType to CONVERSATIONS for a span of time until 10 AM and then move to ENDED_CONVERSATIONS, the console plugin shows all conversation events before 10 AM and only ended conversations after 10 AM.

  5. Refresh the Network Traffic page on the Traffic flows tab. Notice there are two new columns, Event/Type and Conversation Id. All the Event/Type fields are Flow when Flow is the selected query option.

  6. Select Query Options and choose the Log Type, Conversation. Now the Event/Type shows all of the desired conversation events.

  7. Next you can filter on a specific conversation ID or switch between the Conversation and Flow log type options from the side panel.

Working with DNS tracking

Using DNS tracking, you can monitor your network, conduct security analysis, and troubleshoot DNS issues. You can track DNS by editing the FlowCollector to the specifications in the following YAML example.

CPU and memory usage increases are observed in the eBPF agent when this feature is enabled.
Procedure

  1. In the web console, navigate to Operators → Installed Operators.

  2. Under the Provided APIs heading for the NetObserv Operator, select Flow Collector.

  3. Select cluster then select the YAML tab.

  4. Configure the FlowCollector custom resource. A sample configuration is as follows:

    Configure FlowCollector for DNS tracking
    apiVersion: flows.netobserv.io/v1alpha1
kind: FlowCollector
metadata:
  name: cluster
spec:
  namespace: netobserv
  deploymentModel: DIRECT
  agent:
    type: EBPF
    ebpf:
      features:
       - DNSTracking           (1)
      privileged: true         (2)
    1 You can set the spec.agent.ebpf.features parameter list to enable DNS tracking of each network flow in the web console.
    2 Note that the spec.agent.ebpf.privileged specification value must be true for DNS tracking to be enabled.

  5. When you refresh the Network Traffic page, there are new DNS representations you can choose to view in the Overview and Traffic Flow views and new filters you can apply.

    1. Select new DNS choices in Manage panels to display graphical visualizations and DNS metrics in the Overview.

    2. Select new choices in Manage columns to add DNS columns to the Traffic Flows view.

    3. Filter on specific DNS metrics, such as DNS Id, DNS Latency and DNS Response Code, and see more information from the side panel.

Using the histogram

You can click Show histogram to display a toolbar view for visualizing the history of flows as a bar chart. The histogram shows the number of logs over time. You can select a part of the histogram to filter the network flow data in the table that follows the toolbar.

Observing the network traffic from the Topology view

The Topology view provides a graphical representation of the network flows and the amount of traffic. As an administrator, you can monitor the traffic data across the application by using the Topology view.

Working with the Topology view

As an administrator, you can navigate to the Topology view to see the details and metrics of the component.

Procedure

  1. Navigate to Observe → Network Traffic.

  2. In the Network Traffic page, click the Topology tab.

You can click each component in the Topology to view the details and metrics of the component.

Configuring the advanced options for the Topology view

You can customize and export the view by using Show advanced options. The advanced options view has the following features:

  • Find in view: To search the required components in the view.

  • Display options: To configure the following options:

    • Layout: To select the layout of the graphical representation. The default value is ColaNoForce.

    • Scope: To select the scope of components between which the network traffic flows. The default value is Namespace.

    • Groups: To enchance the understanding of ownership by grouping the components. The default value is None.

    • Collapse groups: To expand or collapse the groups. The groups are expanded by default. This option is disabled if Groups has value None.

    • Show: To select the details that need to be displayed. All the options are checked by default. The options available are: Edges, Edges label, and Badges.

    • Truncate labels: To select the required width of the label from the drop-down list. The default value is M.

Exporting the topology view

To export the view, click Export topology view. The view is downloaded in PNG format.

Filtering the network traffic

By default, the Network Traffic page displays the traffic flow data in the cluster based on the default filters configured in the FlowCollector instance. You can use the filter options to observe the required data by changing the preset filter.

Query Options

You can use Query Options to optimize the search results, as listed below:

  • Log Type: The available options Conversation and Flows provide the ability to query flows by log type, such as flow log, new conversation, completed conversation, and a heartbeat, which is a periodic record with updates for long conversations. A conversation is an aggregation of flows between the same peers.

  • Duplicated flows: A flow might be reported from several interfaces, and from both source and destination nodes, making it appear in the data several times. By selecting this query option, you can choose to show duplicated flows. Duplicated flows have the same sources and destinations, including ports, and also have the same protocols, with the exception of Interface and Direction fields. Duplicates are hidden by default. Use the Direction filter in the Common section of the dropdown list to switch between ingress and egress traffic.

  • Match filters: You can determine the relation between different filter parameters selected in the advanced filter. The available options are Match all and Match any. Match all provides results that match all the values, and Match any provides results that match any of the values entered. The default value is Match all.

  • Limit: The data limit for internal backend queries. Depending upon the matching and the filter settings, the number of traffic flow data is displayed within the specified limit.

Quick filters

The default values in Quick filters drop-down menu are defined in the FlowCollector configuration. You can modify the options from console.

Advanced filters

You can set the advanced filters, Common, Source, or Destination, by selecting the parameter to be filtered from the dropdown list. The flow data is filtered based on the selection. To enable or disable the applied filter, you can click on the applied filter listed below the filter options.

You can toggle between arrow up long solid One way and arrow up long solid arrow down long solid Back and forth filtering. The arrow up long solid One way filter shows only Source and Destination traffic according to your filter selections. You can use Swap to change the directional view of the Source and Destination traffic. The arrow up long solid arrow down long solid Back and forth filter includes return traffic with the Source and Destination filters. The directional flow of network traffic is shown in the Direction column in the Traffic flows table as Ingress`or `Egress for inter-node traffic and `Inner`for traffic inside a single node.

You can click Reset defaults to remove the existing filters, and apply the filter defined in FlowCollector configuration.

To understand the rules of specifying the text value, click Learn More.

Alternatively, you can access the traffic flow data in the Network Traffic tab of the Namespaces, Services, Routes, Nodes, and Workloads pages which provide the filtered data of the corresponding aggregations.

Additional resources

For more information about configuring quick filters in the FlowCollector, see Configuring Quick Filters and the Flow Collector sample resource.