$ oc edit cloudcredential cluster
You can update, or upgrade, an OpenShift Container Platform cluster by using the web console. The following steps update a cluster within a minor version. You can use the same instructions for updating a cluster between minor versions.
Use the web console or
Have access to the cluster as a user with
See Using RBAC to define and apply permissions.
Support for RHEL7 workers is removed in OpenShift Container Platform 4.10. You must replace RHEL7 workers with RHEL8 or RHCOS workers before upgrading to OpenShift Container Platform 4.10. Red Hat does not support in-place RHEL7 to RHEL8 updates for RHEL workers; those hosts must be replaced with a clean operating system install.
Ensure all Operators previously installed through Operator Lifecycle Manager (OLM) are updated to their latest version in their latest channel. Updating the Operators ensures they have a valid update path when the default OperatorHub catalogs switch from the current minor version to the next during a cluster update. See Updating installed Operators for more information.
Ensure that all machine config pools (MCPs) are running and not paused. Nodes associated with a paused MCP are skipped during the update process. You can pause the MCPs if you are performing a canary rollout update strategy.
To accommodate the time it takes to update, you are able to do a partial update by updating the worker or custom pool nodes. You can pause and resume within the progress bar of each pool.
If your cluster uses manually maintained credentials, ensure that the Cloud Credential Operator (CCO) is in an upgradeable state. For more information, see Upgrading clusters with manually maintained credentials.
If your cluster uses manually maintained credentials with the AWS Secure Token Service (STS), obtain a copy of the
ccoctl utility from the release image being updated to and use it to process any updated credentials. For more information, see Upgrading an OpenShift Container Platform cluster configured for manual mode with STS.
If you run an Operator or you have configured any application with the pod disruption budget, you might experience an interruption during the upgrade process. If
minAvailable is set to 1 in
PodDisruptionBudget, the nodes are drained to apply pending machine configs which might block the eviction process. If several nodes are rebooted, all the pods might run on only one node, and the
PodDisruptionBudget field can prevent the node drain.
In some specific use cases, you might want a more controlled update process where you do not want specific nodes updated concurrently with the rest of the cluster. These use cases include, but are not limited to:
You have mission-critical applications that you do not want unavailable during the update. You can slowly test the applications on your nodes in small batches after the update.
You have a small maintenance window that does not allow the time for all nodes to be updated, or you have multiple maintenance windows.
The rolling update process is not a typical update workflow. With larger clusters, it can be a time-consuming process that requires you execute multiple commands. This complexity can result in errors that can affect the entire cluster. It is recommended that you carefully consider whether your organization wants to use a rolling update and carefully plan the implementation of the process before you start.
The rolling update process described in this topic involves:
Creating one or more custom machine config pools (MCPs).
Labeling each node that you do not want to update immediately to move those nodes to the custom MCPs.
Pausing those custom MCPs, which prevents updates to those nodes.
Performing the cluster update.
Unpausing one custom MCP, which triggers the update on those nodes.
Testing the applications on those nodes to make sure the applications work as expected on those newly-updated nodes.
Optionally removing the custom labels from the remaining nodes in small batches and testing the applications on those nodes.
Pausing an MCP prevents the Machine Config Operator from applying any configuration changes on the associated nodes. Pausing an MCP also prevents any automatically-rotated certificates from being pushed to the associated nodes, including the automatic CA rotation of the
If you want to use the canary rollout update process, see Performing a canary rollout update.
The Cloud Credential Operator (CCO)
Upgradable status for a cluster with manually maintained credentials is
False by default.
For minor releases, for example, from 4.9 to 4.10, this status prevents you from upgrading until you have addressed any updated permissions and annotated the
CloudCredential resource to indicate that the permissions are updated as needed for the next version. This annotation changes the
Upgradable status to
For z-stream releases, for example, from 4.10.0 to 4.10.1, no permissions are added or changed, so the upgrade is not blocked.
Before upgrading a cluster with manually maintained credentials, you must create any new credentials for the release image that you are upgrading to. Additionally, you must review the required permissions for existing credentials and accommodate any new permissions requirements in the new release for those components.
Extract and examine the
CredentialsRequest custom resource for the new release.
The "Manually creating IAM" section of the installation content for your cloud provider explains how to obtain and use the credentials required for your cloud.
Update the manually maintained credentials on your cluster:
Create new secrets for any
CredentialsRequest custom resources that are added by the new release image.
CredentialsRequest custom resources for any existing credentials that are stored in secrets have changed their permissions requirements, update the permissions as required.
When all of the secrets are correct for the new release, indicate that the cluster is ready to upgrade:
Log in to the OpenShift Container Platform CLI as a user with the
CloudCredential resource to add an
upgradeable-to annotation within the
$ oc edit cloudcredential cluster
... metadata: annotations: cloudcredential.openshift.io/upgradeable-to: <version_number> ...
<version_number> is the version you are upgrading to, in the format
x.y.z. For example,
4.8.2 for OpenShift Container Platform 4.8.2.
It may take several minutes after adding the annotation for the upgradeable status to change.
In the Administrator perspective of the web console, navigate to Administration → Cluster Settings.
To view the CCO status details, click cloud-credential in the Cluster Operators list.
If the Upgradeable status in the Conditions section is False, verify that the
upgradeable-to annotation is free of typographical errors.
When the Upgradeable status in the Conditions section is True, you can begin the OpenShift Container Platform upgrade.
During the upgrade process, nodes in the cluster might become temporarily unavailable. In the case of worker nodes, the machine health check might identify such nodes as unhealthy and reboot them. To avoid rebooting such nodes, pause all the
MachineHealthCheck resources before updating the cluster.
You have access to the cluster with
You have access to the OpenShift Container Platform web console.
Log in to the OpenShift Container Platform web console.
Navigate to Compute → MachineHealthChecks.
To pause the machine health checks, add the
cluster.x-k8s.io/paused="" annotation to each
MachineHealthCheck resource. For example, to add the annotation to the
machine-api-termination-handler resource, complete the following steps:
Click the Options menu next to the
machine-api-termination-handler and click Edit annotations.
In the Edit annotations dialog, click Add more.
In the Key and Value fields, add
"" values, respectively, and click Save.
You can update, or upgrade, a single-node OpenShift Container Platform cluster by using either the console or CLI.
However, note the following limitations:
The prerequisite to pause the
MachineHealthCheck resources is not required because there is no other node to perform the health check.
Restoring a single-node OpenShift Container Platform cluster using an etcd backup is not officially supported. However, it is good practice to perform the etcd backup in case your upgrade fails. If your control plane is healthy, you might be able to restore your cluster to a previous state by using the backup.
Updating a single-node OpenShift Container Platform cluster requires downtime and can include an automatic reboot. The amount of downtime depends on the update payload, as described in the following scenarios:
If the update payload contains an operating system update, which requires a reboot, the downtime is significant and impacts cluster management and user workloads.
If the update contains machine configuration changes that do not require a reboot, the downtime is less, and the impact on the cluster management and user workloads is lessened. In this case, the node draining step is skipped with single-node OpenShift Container Platform because there is no other node in the cluster to reschedule the workloads to.
If the update payload does not contain an operating system update or machine configuration changes, a short API outage occurs and resolves quickly.
There are conditions, such as bugs in an updated package, that can cause the single node to not restart after a reboot. In this case, the update does not rollback automatically.
For information on which machine configuration changes require a reboot, see the note in Understanding the Machine Config Operator.
If updates are available, you can update your cluster from the web console.
You can find information about available OpenShift Container Platform advisories and updates in the errata section of the Customer Portal.
Have access to the web console as a user with
From the web console, click Administration → Cluster Settings and review the contents of the Details tab.
For production clusters, ensure that the Channel is set to the correct channel for the version that you want to update to, such as
For production clusters, you must subscribe to a
If the Update status is not Updates available, you cannot upgrade your cluster.
Select channel indicates the cluster version that your cluster is running or is updating to.
Select a version to update to, and click Save.
The Input channel Update status changes to Update to <product-version> in progress, and you can review the progress of the cluster update by watching the progress bars for the Operators and nodes.
If you are upgrading your cluster to the next minor version, like version 4.y to 4.(y+1), it is recommended to confirm your nodes are upgraded before deploying workloads that rely on a new feature. Any pools with worker nodes that are not yet updated are displayed on the Cluster Settings page.
After the update completes and the Cluster Version Operator refreshes the available updates, check if more updates are available in your current channel.
If updates are available, continue to perform updates in the current channel until you can no longer update.
If no updates are available, change the Channel to the
fast-* channel for the next minor version, and update to the version that you want in that channel.
You might need to perform several intermediate updates until you reach the version that you want.
Changing the update server is optional. If you have an OpenShift Update Service (OSUS) installed and configured locally, you must set the URL for the server as the
upstream to use the local server during updates.
Navigate to Administration → Cluster Settings, click version.
Click the YAML tab and then edit the
upstream parameter value:
... spec: clusterID: db93436d-7b05-42cc-b856-43e11ad2d31a upstream: '<update-server-url>' (1) ...