Soon, all Red Hat OpenShift documentation will only be available on docs.redhat.com, the official location of all Red Hat product documentation. Get familiar with the updated experience today!
  1. Documentation
    2. history
×

Using the Stream Control Transmission Protocol (SCTP) on a bare metal cluster

Support for Stream Control Transmission Protocol (SCTP) on OpenShift Container Platform

As a cluster administrator, you can enable SCTP on the hosts in the cluster. On Red Hat Enterprise Linux CoreOS (RHCOS), the SCTP module is disabled by default.

SCTP is a reliable message based protocol that runs on top of an IP network.

When enabled, you can use SCTP as a protocol with pods, services, and network policy. A Service object must be defined with the type parameter set to either the ClusterIP or NodePort value.

Example configurations using SCTP protocol

You can configure a pod or service to use SCTP by setting the protocol parameter to the SCTP value in the pod or service object.

In the following example, a pod is configured to use SCTP:

apiVersion: v1
kind: Pod
metadata:
  namespace: project1
  name: example-pod
spec:
  containers:
    - name: example-pod
...
      ports:
        - containerPort: 30100
          name: sctpserver
          protocol: SCTP

In the following example, a service is configured to use SCTP:

apiVersion: v1
kind: Service
metadata:
  namespace: project1
  name: sctpserver
spec:
...
  ports:
    - name: sctpserver
      protocol: SCTP
      port: 30100
      targetPort: 30100
  type: ClusterIP

In the following example, a NetworkPolicy object is configured to apply to SCTP network traffic on port 80 from any pods with a specific label:

kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: allow-sctp-on-http
spec:
  podSelector:
    matchLabels:
      role: web
  ingress:
  - ports:
    - protocol: SCTP
      port: 80

Enabling Stream Control Transmission Protocol (SCTP)

As a cluster administrator, you can load and enable the blacklisted SCTP kernel module on worker nodes in your cluster.

Prerequisites

  • Install the OpenShift CLI (oc).

  • Access to the cluster as a user with the cluster-admin role.

Procedure

  1. Create a file named load-sctp-module.yaml that contains the following YAML definition:

    apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
  name: load-sctp-module
  labels:
    machineconfiguration.openshift.io/role: worker
spec:
  config:
    ignition:
      version: 3.2.0
    storage:
      files:
        - path: /etc/modprobe.d/sctp-blacklist.conf
          mode: 0644
          overwrite: true
          contents:
            source: data:,
        - path: /etc/modules-load.d/sctp-load.conf
          mode: 0644
          overwrite: true
          contents:
            source: data:,sctp

  2. To create the MachineConfig object, enter the following command:

    $ oc create -f load-sctp-module.yaml

  3. Optional: To watch the status of the nodes while the MachineConfig Operator applies the configuration change, enter the following command. When the status of a node transitions to Ready, the configuration update is applied.

    $ oc get nodes

Verifying Stream Control Transmission Protocol (SCTP) is enabled

You can verify that SCTP is working on a cluster by creating a pod with an application that listens for SCTP traffic, associating it with a service, and then connecting to the exposed service.

Prerequisites

  • Access to the internet from the cluster to install the nc package.

  • Install the OpenShift CLI (oc).

  • Access to the cluster as a user with the cluster-admin role.

Procedure

  1. Create a pod starts an SCTP listener:

    1. Create a file named sctp-server.yaml that defines a pod with the following YAML:

      apiVersion: v1
kind: Pod
metadata:
  name: sctpserver
  labels:
    app: sctpserver
spec:
  containers:
    - name: sctpserver
      image: registry.access.redhat.com/ubi8/ubi
      command: ["/bin/sh", "-c"]
      args:
        ["dnf install -y nc && sleep inf"]
      ports:
        - containerPort: 30102
          name: sctpserver
          protocol: SCTP

    2. Create the pod by entering the following command:

      $ oc create -f sctp-server.yaml

  2. Create a service for the SCTP listener pod.

    1. Create a file named sctp-service.yaml that defines a service with the following YAML:

      apiVersion: v1
kind: Service
metadata:
  name: sctpservice
  labels:
    app: sctpserver
spec:
  type: NodePort
  selector:
    app: sctpserver
  ports:
    - name: sctpserver
      protocol: SCTP
      port: 30102
      targetPort: 30102

    2. To create the service, enter the following command:

      $ oc create -f sctp-service.yaml

  3. Create a pod for the SCTP client.

    1. Create a file named sctp-client.yaml with the following YAML:

      apiVersion: v1
kind: Pod
metadata:
  name: sctpclient
  labels:
    app: sctpclient
spec:
  containers:
    - name: sctpclient
      image: registry.access.redhat.com/ubi8/ubi
      command: ["/bin/sh", "-c"]
      args:
        ["dnf install -y nc && sleep inf"]

    2. To create the Pod object, enter the following command:

      $ oc apply -f sctp-client.yaml

  4. Run an SCTP listener on the server.

    1. To connect to the server pod, enter the following command:

      $ oc rsh sctpserver

    2. To start the SCTP listener, enter the following command:

      $ nc -l 30102 --sctp

  5. Connect to the SCTP listener on the server.

    1. Open a new terminal window or tab in your terminal program.

    2. Obtain the IP address of the sctpservice service. Enter the following command:

      $ oc get services sctpservice -o go-template='{{.spec.clusterIP}}{{"\n"}}'

    3. To connect to the client pod, enter the following command:

      $ oc rsh sctpclient

    4. To start the SCTP client, enter the following command. Replace <cluster_IP> with the cluster IP address of the sctpservice service.

      # nc <cluster_IP> 30102 --sctp