×

You can use the Samples Operator with an alternate registry by first creating a mirror registry.

You must have access to the internet to obtain the necessary container images. In this procedure, you place the mirror registry on a mirror host that has access to both your network and the internet.

About the mirror registry

You can mirror the images that are required for OpenShift Container Platform installation and subsequent product updates to a mirror registry. These actions use the same process. The release image, which contains the description of the content, and the images it references are all mirrored. In addition, the Operator catalog source image and the images that it references must be mirrored for each Operator that you use. After you mirror the content, you configure each cluster to retrieve this content from your mirror registry.

The mirror registry can be any container registry that supports the most recent container image API, which is referred to as schema2. All major cloud provider registries, as well as Red Hat Quay, Artifactory, and the open source Docker distribution registry have the necessary support. Using one of these registries ensures that OpenShift Container Platform can verify the integrity of each image in disconnected environments.

The mirror registry must be reachable by every machine in the clusters that you provision. If the registry is unreachable installation, updating, or normal operations such as workload relocation might fail. For that reason, you must run mirror registries in a highly available way, and the mirror registries must at least match the production availability of your OpenShift Container Platform clusters.

When you populate a mirror registry with OpenShift Container Platform images, you can follow two scenarios. If you have a host that can access both the internet and your mirror registry, but not your cluster nodes, you can directly mirror the content from that machine. This process is referred to as connected mirroring. If you have no such host, you must mirror the images to a file system and then bring that host or removable media into your restricted environment. This process is referred to as disconnected mirroring.

Preparing the mirror host

Before you create the mirror registry, you must prepare the mirror host.

Installing the CLI by downloading the binary

You can install the OpenShift CLI (oc) in order to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.4. Download and install the new version of oc.

Installing the CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure
  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.

  2. Select your infrastructure provider, and, if applicable, your installation type.

  3. In the Command-line interface section, select Linux from the drop-down menu and click Download command-line tools.

  4. Unpack the archive:

    $ tar xvzf <file>
  5. Place the oc binary in a directory that is on your PATH.

    To check your PATH, execute the following command:

    $ echo $PATH

After you install the CLI, it is available using the oc command:

$ oc <command>

Installing the CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure
  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.

  2. Select your infrastructure provider, and, if applicable, your installation type.

  3. In the Command-line interface section, select Windows from the drop-down menu and click Download command-line tools.

  4. Unzip the archive with a ZIP program.

  5. Move the oc binary to a directory that is on your PATH.

    To check your PATH, open the command prompt and execute the following command:

    C:\> path

After you install the CLI, it is available using the oc command:

C:\> oc <command>

Installing the CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure
  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.

  2. Select your infrastructure provider, and, if applicable, your installation type.

  3. In the Command-line interface section, select MacOS from the drop-down menu and click Download command-line tools.

  4. Unpack and unzip the archive.

  5. Move the oc binary to a directory on your PATH.

    To check your PATH, open a terminal and execute the following command:

    $ echo $PATH

After you install the CLI, it is available using the oc command:

$ oc <command>

Configuring credentials that allow images to be mirrored

Create a container image registry credentials file that allows mirroring images from Red Hat to your mirror.

Prerequisites
  • You configured a mirror registry to use in your restricted network.

Procedure

Complete the following steps on the installation host:

  1. Download your registry.redhat.io pull secret from the Pull Secret page on the Red Hat OpenShift Cluster Manager site and save it to a .json file.

  2. Generate the base64-encoded user name and password or token for your mirror registry:

    $ echo -n '<user_name>:<password>' | base64 -w0 (1)
    BGVtbYk3ZHAtqXs=
    1 For <user_name> and <password>, specify the user name and password that you configured for your registry.
  3. Make a copy of your pull secret in JSON format:

    $ cat ./pull-secret.text | jq .  > <path>/<pull-secret-file>(1)
    1 Specify the path to the folder to store the pull secret in and a name for the JSON file that you create.

    The contents of the file resemble the following example:

    {
      "auths": {
        "cloud.openshift.com": {
          "auth": "b3BlbnNo...",
          "email": "you@example.com"
        },
        "quay.io": {
          "auth": "b3BlbnNo...",
          "email": "you@example.com"
        },
        "registry.connect.redhat.com": {
          "auth": "NTE3Njg5Nj...",
          "email": "you@example.com"
        },
        "registry.redhat.io": {
          "auth": "NTE3Njg5Nj...",
          "email": "you@example.com"
        }
      }
    }
  4. Edit the new file and add a section that describes your registry to it:

      "auths": {
        "<mirror_registry>": { (1)
          "auth": "<credentials>", (2)
          "email": "you@example.com"
      },
    1 For <mirror_registry>, specify the registry domain name, and optionally the port, that your mirror registry uses to serve content. For example, registry.example.com or registry.example.com:5000
    2 For <credentials>, specify the base64-encoded user name and password for the mirror registry.

    The file resembles the following example:

    {
      "auths": {
        "<mirror_registry>": {
          "auth": "<credentials>",
          "email": "you@example.com"
        },
        "cloud.openshift.com": {
          "auth": "b3BlbnNo...",
          "email": "you@example.com"
        },
        "quay.io": {
          "auth": "b3BlbnNo...",
          "email": "you@example.com"
        },
        "registry.connect.redhat.com": {
          "auth": "NTE3Njg5Nj...",
          "email": "you@example.com"
        },
        "registry.redhat.io": {
          "auth": "NTE3Njg5Nj...",
          "email": "you@example.com"
        }
      }
    }

Mirroring the OpenShift Container Platform image repository

Mirror the OpenShift Container Platform image repository to your registry to use during cluster installation or upgrade.

Prerequisites
  • Your mirror host has access to the Internet.

  • You configured a mirror registry to use in your restricted network and can access the certificate and credentials that you configured.

  • You downloaded the pull secret from the Pull Secret page on the Red Hat OpenShift Cluster Manager site and modified it to include authentication to your mirror repository.

  • If you use self-signed certificates that do not set a Subject Alternative Name, you must precede the oc commands in this procedure with GODEBUG=x509ignoreCN=0. If you do not set this variable, the oc commands will fail with the following error:

    x509: certificate relies on legacy Common Name field, use SANs or temporarily enable Common Name matching with GODEBUG=x509ignoreCN=0
Procedure

Complete the following steps on the mirror host:

  1. Review the OpenShift Container Platform downloads page to determine the version of OpenShift Container Platform that you want to install and determine the corresponding tag on the Repository Tags page.

  2. Set the required environment variables:

    $ export OCP_RELEASE=<release_version> (1)
    $ export LOCAL_REGISTRY='<local_registry_host_name>:<local_registry_host_port>' (2)
    $ export LOCAL_REPOSITORY='<local_repository_name>' (3)
    $ export PRODUCT_REPO='openshift-release-dev' (4)
    $ export LOCAL_SECRET_JSON='<path_to_pull_secret>' (5)
    $ export RELEASE_NAME="ocp-release" (6)
    $ export ARCHITECTURE=<server_architecture> (7)
    $ REMOVABLE_MEDIA_PATH=<path> (8)
    1 For <release_version>, specify the tag that corresponds to the version of OpenShift Container Platform to install, such as 4.5.0.
    2 For <local_registry_host_name>, specify the registry domain name for your mirror repository, and for <local_registry_host_port>, specify the port that it serves content on.
    3 For <local_repository_name>, specify the name of the repository to create in your registry, such as ocp4/openshift4.
    4 The repository to mirror. For a production release, you must specify openshift-release-dev.
    5 For <path_to_pull_secret>, specify the absolute path to and file name of the pull secret for your mirror registry that you created.
    6 The release mirror. For a production release, you must specify ocp-release.
    7 For server_architecture, specify the architecture of the server, such as x86_64.
    8 For <path>, specify the full path, including the initial forward slash (/) character.
  3. Mirror the version images to the internal container registry:

    • If your mirror host does not have Internet access, take the following actions:

      1. Connect the removable media to a system that is connected to the Internet.

      2. Review the images and configuration manifests to mirror:

        $ oc adm release mirror -a ${LOCAL_SECRET_JSON}  \
             --from=quay.io/${PRODUCT_REPO}/${RELEASE_NAME}:${OCP_RELEASE}-${ARCHITECTURE} \
             --to=${LOCAL_REGISTRY}/${LOCAL_REPOSITORY} \
             --to-release-image=${LOCAL_REGISTRY}/${LOCAL_REPOSITORY}:${OCP_RELEASE}-${ARCHITECTURE} --dry-run
      3. Record the entire imageContentSources section from the output of the previous command. The information about your mirrors is unique to your mirrored repository, and you must add the imageContentSources section to the install-config.yaml file during installation.

      4. Mirror the images to a directory on the removable media:

        $ oc adm release mirror -a ${LOCAL_SECRET_JSON} --to-dir=${REMOVABLE_MEDIA_PATH}/mirror quay.io/${PRODUCT_REPO}/${RELEASE_NAME}:${OCP_RELEASE}-${ARCHITECTURE}
      5. Take the media to the restricted network environment and upload the images to the local container registry.

        $ oc image mirror -a ${LOCAL_SECRET_JSON} --from-dir=${REMOVABLE_MEDIA_PATH}/mirror "file://openshift/release:${OCP_RELEASE}*" ${LOCAL_REGISTRY}/${LOCAL_REPOSITORY} (1)
        1 For REMOVABLE_MEDIA_PATH, you must use the same path that you specified when you mirrored the images.
    • If the local container registry is connected to the mirror host, take the following actions:

      1. Directly push the release images to the local registry by using following command:

        $ oc adm release mirror -a ${LOCAL_SECRET_JSON}  \
             --from=quay.io/${PRODUCT_REPO}/${RELEASE_NAME}:${OCP_RELEASE}-${ARCHITECTURE} \
             --to=${LOCAL_REGISTRY}/${LOCAL_REPOSITORY} \
             --to-release-image=${LOCAL_REGISTRY}/${LOCAL_REPOSITORY}:${OCP_RELEASE}-${ARCHITECTURE}

        This command pulls the release information as a digest, and its output includes the imageContentSources data that you require when you install your cluster.

      2. Record the entire imageContentSources section from the output of the previous command. The information about your mirrors is unique to your mirrored repository, and you must add the imageContentSources section to the install-config.yaml file during installation.

        The image name gets patched to Quay.io during the mirroring process, and the podman images will show Quay.io in the registry on the bootstrap virtual machine.

  4. To create the installation program that is based on the content that you mirrored, extract it and pin it to the release:

    • If your mirror host does not have Internet access, run the following command:

      $ oc adm release extract -a ${LOCAL_SECRET_JSON} --command=openshift-install "${LOCAL_REGISTRY}/${LOCAL_REPOSITORY}:${OCP_RELEASE}"
    • If the local container registry is connected to the mirror host, run the following command:

      $ oc adm release extract -a ${LOCAL_SECRET_JSON} --command=openshift-install "${LOCAL_REGISTRY}/${LOCAL_REPOSITORY}:${OCP_RELEASE}-${ARCHITECTURE}"

To ensure that you use the correct images for the version of OpenShift Container Platform that you selected, you must extract the installation program from the mirrored content.

You must perform this step on a machine with an active Internet connection.

Using Samples Operator image streams with alternate or mirrored registries

Most image streams in the openshift namespace managed by the Cluster Samples Operator point to images located in the Red Hat registry at registry.redhat.io.

The jenkins, jenkins-agent-maven, and jenkins-agent-nodejs image streams come from the install payload and are managed by the Samples Operator.

Setting the samplesRegistry field in the Sample Operator configuration file to registry.redhat.io is redundant because it is already directed to registry.redhat.io for everything but Jenkins images and image streams. It also breaks the installation payload for Jenkins image streams.

The Samples Operator prevents the use of the following registries for the Jenkins imagestreams:

The cli, installer, must-gather, and tests image streams, while part of the install payload, are not managed by the Samples Operator. These are not addressed in this procedure.

Prerequisites
  • Access to the cluster as a user with the cluster-admin role.

  • Create a pull secret for your mirror registry.

Procedure
  1. Access the images of a specific image stream to mirror, for example:

    $ oc get is <imagestream> -n openshift -o json | jq .spec.tags[].from.name | grep registry.redhat.io
  2. Mirror images from registry.redhat.io associated with any image streams you need

    $ oc image mirror registry.redhat.io/rhscl/ruby-25-rhel7:latest ${MIRROR_ADDR}/rhscl/ruby-25-rhel7:latest
  3. Add the required trusted CAs for the mirror in the cluster’s image configuration object:

    $ oc create configmap registry-config --from-file=${MIRROR_ADDR_HOSTNAME}..5000=$path/ca.crt -n openshift-config
    $ oc patch image.config.openshift.io/cluster --patch '{"spec":{"additionalTrustedCA":{"name":"registry-config"}}}' --type=merge
  4. Update the samplesRegistry field in the Samples Operator configuration object to contain the hostname portion of the mirror location defined in the mirror configuration:

    $ oc edit configs.samples.operator.openshift.io -n openshift-cluster-samples-operator

    This is required because the image stream import process does not use the mirror or search mechanism at this time.

  5. Add any image streams that are not mirrored into the skippedImagestreams field of the Samples Operator configuration object. Or if you do not want to support any of the sample image streams, set the Samples Operator to Removed in the Samples Operator configuration object.

    Any unmirrored image streams that are not skipped, or if the Samples Operator is not changed to Removed, will result in the Samples Operator reporting a Degraded status two hours after the image stream imports start failing.

    Many of the templates in the openshift namespace reference the image streams. So using Removed to purge both the image streams and templates will eliminate the possibility of attempts to use them if they are not functional because of any missing image streams.