Creating applications using the CLI - Application life cycle management | Applications

You can create an OpenShift Container Platform application from components that include source or binary code, images, and templates by using the OpenShift Container Platform CLI.

The set of objects created by new-app depends on the artifacts passed as input: source repositories, images, or templates.

Creating an application from source code

With the new-app command you can create applications from source code in a local or remote Git repository.

The new-app command creates a build configuration, which itself creates a new application image from your source code. The new-app command typically also creates a DeploymentConfig object to deploy the new image, and a service to provide load-balanced access to the deployment running your image.

OpenShift Container Platform automatically detects whether the pipeline or source build strategy should be used, and in the case of source builds, detects an appropriate language builder image.

Local

To create an application from a Git repository in a local directory:

$ oc new-app /<path to source code>

If you use a local Git repository, the repository must have a remote named origin that points to a URL that is accessible by the OpenShift Container Platform cluster. If there is no recognized remote, running the new-app command will create a binary build.

Remote

To create an application from a remote Git repository:

$ oc new-app https://github.com/sclorg/cakephp-ex

To create an application from a private remote Git repository:

$ oc new-app https://github.com/youruser/yourprivaterepo --source-secret=yoursecret

If you use a private remote Git repository, you can use the --source-secret flag to specify an existing source clone secret that will get injected into your build config to access the repository.

You can use a subdirectory of your source code repository by specifying a --context-dir flag. To create an application from a remote Git repository and a context subdirectory:

$ oc new-app https://github.com/sclorg/s2i-ruby-container.git \
    --context-dir=2.0/test/puma-test-app

Also, when specifying a remote URL, you can specify a Git branch to use by appending #<branch_name> to the end of the URL:

$ oc new-app https://github.com/openshift/ruby-hello-world.git#beta4

Build strategy detection

If a Jenkins file exists in the root or specified context directory of the source repository when creating a new application, OpenShift Container Platform generates a pipeline build strategy. Otherwise, it generates a source build strategy.

Override the build strategy by setting the --strategy flag to either pipeline or source.

$ oc new-app /home/user/code/myapp --strategy=docker

The oc command requires that files containing build sources are available in a remote Git repository. For all source builds, you must use git remote -v.

Language detection

If you use the source build strategy, new-app attempts to determine the language builder to use by the presence of certain files in the root or specified context directory of the repository:

Table 1. Languages detected by `new-app`
Language	Files
`dotnet`	`project.json`, `*.csproj`
`jee`	`pom.xml`
`nodejs`	`app.json`, `package.json`
`perl`	`cpanfile`, `index.pl`
`php`	`composer.json`, `index.php`
`python`	`requirements.txt`, `setup.py`
`ruby`	`Gemfile`, `Rakefile`, `config.ru`
`scala`	`build.sbt`
`golang`	`Godeps`, `main.go`

After a language is detected, new-app searches the OpenShift Container Platform server for image stream tags that have a supports annotation matching the detected language, or an image stream that matches the name of the detected language. If a match is not found, new-app searches the Docker Hub registry for an image that matches the detected language based on name.

You can override the image the builder uses for a particular source repository by specifying the image, either an image stream or container specification, and the repository with a ~ as a separator. Note that if this is done, build strategy detection and language detection are not carried out.

For example, to use the myproject/my-ruby imagestream with the source in a remote repository:

$ oc new-app myproject/my-ruby~https://github.com/openshift/ruby-hello-world.git

To use the openshift/ruby-20-centos7:latest container image stream with the source in a local repository:

$ oc new-app openshift/ruby-20-centos7:latest~/home/user/code/my-ruby-app

Language detection requires the Git client to be locally installed so that your repository can be cloned and inspected. If Git is not available, you can avoid the language detection step by specifying the builder image to use with your repository with the <image>~<repository> syntax.

The -i <image> <repository> invocation requires that new-app attempt to clone repository in order to determine what type of artifact it is, so this will fail if Git is not available.

The -i <image> --code <repository> invocation requires new-app clone repository in order to determine whether image should be used as a builder for the source code, or deployed separately, as in the case of a database image.

Creating an application from an image

You can deploy an application from an existing image. Images can come from image streams in the OpenShift Container Platform server, images in a specific registry, or images in the local Docker server.

The new-app command attempts to determine the type of image specified in the arguments passed to it. However, you can explicitly tell new-app whether the image is a container image using the --docker-image argument or an image stream using the -i|--image-stream argument.

If you specify an image from your local Docker repository, you must ensure that the same image is available to the OpenShift Container Platform cluster nodes.

Docker Hub MySQL image

Create an application from the Docker Hub MySQL image, for example:

$ oc new-app mysql

Image in a private registry

Create an application using an image in a private registry, specify the full container image specification:

$ oc new-app myregistry:5000/example/myimage

Existing image stream and optional image stream tag

Create an application from an existing image stream and optional image stream tag:

$ oc new-app my-stream:v1

Creating an application from a template

You can create an application from a previously stored template or from a template file, by specifying the name of the template as an argument. For example, you can store a sample application template and use it to create an application.

Create an application from a stored template, for example:

$ oc create -f examples/sample-app/application-template-stibuild.json
$ oc new-app ruby-helloworld-sample

To directly use a template in your local file system, without first storing it in OpenShift Container Platform, use the -f|--file argument. For example:

$ oc new-app -f examples/sample-app/application-template-stibuild.json

Template parameters

When creating an application based on a template, use the -p|--param argument to set parameter values that are defined by the template:

$ oc new-app ruby-helloworld-sample \
    -p ADMIN_USERNAME=admin -p ADMIN_PASSWORD=mypassword

You can store your parameters in a file, then use that file with --param-file when instantiating a template. If you want to read the parameters from standard input, use --param-file=-:

$ cat helloworld.params
ADMIN_USERNAME=admin
ADMIN_PASSWORD=mypassword
$ oc new-app ruby-helloworld-sample --param-file=helloworld.params
$ cat helloworld.params | oc new-app ruby-helloworld-sample --param-file=-

Modifying application creation

The new-app command generates OpenShift Container Platform objects that build, deploy, and run the application that is created. Normally, these objects are created in the current project and assigned names that are derived from the input source repositories or the input images. However, with new-app you can modify this behavior.

Table 2. `new-app` output objects
Object	Description
`BuildConfig`	A `BuildConfig` object is created for each source repository that is specified in the command line. The `BuildConfig` object specifies the strategy to use, the source location, and the build output location.
`ImageStreams`	For the `BuildConfig` object, two image streams are usually created. One represents the input image. With source builds, this is the builder image. With `Docker` builds, this is the FROM image. The second one represents the output image. If a container image was specified as input to `new-app`, then an image stream is created for that image as well.
`DeploymentConfig`	A `DeploymentConfig` object is created either to deploy the output of a build, or a specified image. The `new-app` command creates `emptyDir` volumes for all Docker volumes that are specified in containers included in the resulting `DeploymentConfig` object .
`Service`	The `new-app` command attempts to detect exposed ports in input images. It uses the lowest numeric exposed port to generate a service that exposes that port. In order to expose a different port, after `new-app` has completed, simply use the `oc expose` command to generate additional services.
Other	Other objects can be generated when instantiating templates, according to the template.

Specifying environment variables

When generating applications from a template, source, or an image, you can use the -e|--env argument to pass environment variables to the application container at run time:

$ oc new-app openshift/postgresql-92-centos7 \
    -e POSTGRESQL_USER=user \
    -e POSTGRESQL_DATABASE=db \
    -e POSTGRESQL_PASSWORD=password

The variables can also be read from file using the --env-file argument:

$ cat postgresql.env
POSTGRESQL_USER=user
POSTGRESQL_DATABASE=db
POSTGRESQL_PASSWORD=password
$ oc new-app openshift/postgresql-92-centos7 --env-file=postgresql.env

Additionally, environment variables can be given on standard input by using --env-file=-:

$ cat postgresql.env | oc new-app openshift/postgresql-92-centos7 --env-file=-

Any BuildConfig objects created as part of new-app processing are not updated with environment variables passed with the -e|--env or --env-file argument.

Specifying build environment variables

When generating applications from a template, source, or an image, you can use the --build-env argument to pass environment variables to the build container at run time:

$ oc new-app openshift/ruby-23-centos7 \
    --build-env HTTP_PROXY=http://myproxy.net:1337/ \
    --build-env GEM_HOME=~/.gem

The variables can also be read from a file using the --build-env-file argument:

$ cat ruby.env
HTTP_PROXY=http://myproxy.net:1337/
GEM_HOME=~/.gem
$ oc new-app openshift/ruby-23-centos7 --build-env-file=ruby.env

Additionally, environment variables can be given on standard input by using --build-env-file=-:

$ cat ruby.env | oc new-app openshift/ruby-23-centos7 --build-env-file=-

Specifying labels

When generating applications from source, images, or templates, you can use the -l|--label argument to add labels to the created objects. Labels make it easy to collectively select, configure, and delete objects associated with the application.

$ oc new-app https://github.com/openshift/ruby-hello-world -l name=hello-world

Viewing the output without creation

To see a dry-run of running the new-app command, you can use the -o|--output argument with a yaml or json value. You can then use the output to preview the objects that are created or redirect it to a file that you can edit. After you are satisfied, you can use oc create to create the OpenShift Container Platform objects.

To output new-app artifacts to a file, edit them, then create them:

$ oc new-app https://github.com/openshift/ruby-hello-world \
    -o yaml > myapp.yaml
$ vi myapp.yaml
$ oc create -f myapp.yaml

Creating objects with different names

Objects created by new-app are normally named after the source repository, or the image used to generate them. You can set the name of the objects produced by adding a --name flag to the command:

$ oc new-app https://github.com/openshift/ruby-hello-world --name=myapp

Creating objects in a different project

Normally, new-app creates objects in the current project. However, you can create objects in a different project by using the -n|--namespace argument:

$ oc new-app https://github.com/openshift/ruby-hello-world -n myproject

Creating multiple objects

The new-app command allows creating multiple applications specifying multiple parameters to new-app. Labels specified in the command line apply to all objects created by the single command. Environment variables apply to all components created from source or images.

To create an application from a source repository and a Docker Hub image:

$ oc new-app https://github.com/openshift/ruby-hello-world mysql

If a source code repository and a builder image are specified as separate arguments, new-app uses the builder image as the builder for the source code repository. If this is not the intent, specify the required builder image for the source using the ~ separator.

Grouping images and source in a single pod

The new-app command allows deploying multiple images together in a single pod. In order to specify which images to group together, use the + separator. The --group command line argument can also be used to specify the images that should be grouped together. To group the image built from a source repository with other images, specify its builder image in the group:

$ oc new-app ruby+mysql

To deploy an image built from source and an external image together:

$ oc new-app \
    ruby~https://github.com/openshift/ruby-hello-world \
    mysql \
    --group=ruby+mysql

Searching for images, templates, and other inputs

To search for images, templates, and other inputs for the oc new-app command, add the --search and --list flags. For example, to find all of the images or templates that include PHP:

$ oc new-app --search php