Prometheus defines a Prometheus deployment.
Prometheus defines a Prometheus deployment.
object
spec
Property | Type | Description |
---|---|---|
|
|
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources |
|
|
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds |
|
Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata |
|
|
|
Specification of the desired behavior of the Prometheus cluster. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status |
|
|
Most recent observed status of the Prometheus cluster. Read-only. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status |
Specification of the desired behavior of the Prometheus cluster. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
object
Property | Type | Description |
---|---|---|
|
|
AdditionalAlertManagerConfigs allows specifying a key of a Secret containing additional Prometheus AlertManager configurations. AlertManager configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alertmanager_config. As AlertManager configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible AlertManager configs are going to break Prometheus after the upgrade. |
|
|
AdditionalAlertRelabelConfigs allows specifying a key of a Secret containing additional Prometheus alert relabel configurations. Alert relabel configurations specified are appended to the configurations generated by the Prometheus Operator. Alert relabel configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alert_relabel_configs. As alert relabel configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible alert relabel configs are going to break Prometheus after the upgrade. |
|
|
AdditionalArgs allows setting additional arguments for the Prometheus container. It is intended for e.g. activating hidden flags which are not supported by the dedicated configuration options yet. The arguments are passed as-is to the Prometheus container which may cause issues if they are invalid or not supported by the given Prometheus version. In case of an argument conflict (e.g. an argument which is already set by the operator itself) or when providing an invalid argument the reconciliation will fail and an error will be logged. |
|
|
Argument as part of the AdditionalArgs list. |
|
|
AdditionalScrapeConfigs allows specifying a key of a Secret containing additional Prometheus scrape configurations. Scrape configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config. As scrape configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible scrape configs are going to break Prometheus after the upgrade. |
|
|
If specified, the pod’s scheduling constraints. |
|
|
Define details regarding alerting. |
|
|
AllowOverlappingBlocks enables vertical compaction and vertical query merge in Prometheus. This is still experimental in Prometheus so it may change in any upcoming release. |
|
|
APIServerConfig allows specifying a host and auth methods to access apiserver. If left empty, Prometheus is assumed to run inside of the cluster and will discover API servers automatically and use the pod’s CA certificate and bearer token file at /var/run/secrets/kubernetes.io/serviceaccount/. |
|
|
ArbitraryFSAccessThroughSMs configures whether configuration based on a service monitor can access arbitrary files on the file system of the Prometheus container e.g. bearer token files. |
|
|
Base image to use for a Prometheus deployment. Deprecated: use 'image' instead |
|
|
ConfigMaps is a list of ConfigMaps in the same namespace as the Prometheus object, which shall be mounted into the Prometheus Pods. Each ConfigMap is added to the StatefulSet definition as a volume named |
|
|
Containers allows injecting additional containers or modifying operator generated containers. This can be used to allow adding an authentication proxy to a Prometheus pod or to change the behavior of an operator generated container. Containers described here modify an operator generated container if they share the same name and modifications are done via a strategic merge patch. The current container names are: |
|
|
A single application container that you want to run within a pod. |
|
|
Disable prometheus compaction. |
|
|
Enable access to prometheus web admin API. Defaults to the value of |
|
|
Enable access to Prometheus disabled features. By default, no features are enabled. Enabling disabled features is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice. For more information see https://prometheus.io/docs/prometheus/latest/disabled_features/ |
|
|
Enable Prometheus to be used as a receiver for the Prometheus remote write protocol. Defaults to the value of |
|
|
EnforcedBodySizeLimit defines the maximum size of uncompressed response body that will be accepted by Prometheus. Targets responding with a body larger than this many bytes will cause the scrape to fail. Example: 100MB. If defined, the limit will apply to all service/pod monitors and probes. This is an experimental feature, this behaviour could change or be removed in the future. Only valid in Prometheus versions 2.28.0 and newer. |
|
|
Per-scrape limit on number of labels that will be accepted for a sample. If more than this number of labels are present post metric-relabeling, the entire scrape will be treated as failed. 0 means no limit. Only valid in Prometheus versions 2.27.0 and newer. |
|
|
Per-scrape limit on length of labels name that will be accepted for a sample. If a label name is longer than this number post metric-relabeling, the entire scrape will be treated as failed. 0 means no limit. Only valid in Prometheus versions 2.27.0 and newer. |
|
|
Per-scrape limit on length of labels value that will be accepted for a sample. If a label value is longer than this number post metric-relabeling, the entire scrape will be treated as failed. 0 means no limit. Only valid in Prometheus versions 2.27.0 and newer. |
|
|
EnforcedNamespaceLabel If set, a label will be added to
1. all user-metrics (created by |
|
|
EnforcedSampleLimit defines global limit on number of scraped samples that will be accepted. This overrides any SampleLimit set per ServiceMonitor or/and PodMonitor. It is meant to be used by admins to enforce the SampleLimit to keep overall number of samples/series under the desired limit. Note that if SampleLimit is lower that value will be taken instead. |
|
|
EnforcedTargetLimit defines a global limit on the number of scraped targets. This overrides any TargetLimit set per ServiceMonitor or/and PodMonitor. It is meant to be used by admins to enforce the TargetLimit to keep the overall number of targets under the desired limit. Note that if TargetLimit is lower, that value will be taken instead, except if either value is zero, in which case the non-zero value will be used. If both values are zero, no limit is enforced. |
|
|
Interval between consecutive evaluations. Default: |
|
|
List of references to PodMonitor, ServiceMonitor, Probe and PrometheusRule objects to be excluded from enforcing a namespace label of origin. Applies only if enforcedNamespaceLabel set to true. |
|
|
ObjectReference references a PodMonitor, ServiceMonitor, Probe or PrometheusRule object. |
|
|
Exemplars related settings that are runtime reloadable. It requires to enable the exemplar storage feature to be effective. |
|
|
The labels to add to any time series or alerts when communicating with external systems (federation, remote storage, Alertmanager). |
|
|
The external URL the Prometheus instances will be available under. This is necessary to generate correct URLs. This is necessary if Prometheus is not served from root of a DNS name. |
|
|
Pods' hostAliases configuration |
|
|
HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file. |
|
|
Use the host’s network namespace if true. Make sure to understand the security implications if you want to enable it. When hostNetwork is enabled, this will set dnsPolicy to ClusterFirstWithHostNet automatically. |
|
|
IgnoreNamespaceSelectors if set to true will ignore NamespaceSelector settings from all PodMonitor, ServiceMonitor and Probe objects. They will only discover endpoints within the namespace of the PodMonitor, ServiceMonitor and Probe objects. Defaults to false. |
|
|
Image if specified has precedence over baseImage, tag and sha combinations. Specifying the version is still necessary to ensure the Prometheus Operator knows what version of Prometheus is being configured. |
|
|
Image pull policy for the 'prometheus', 'init-config-reloader' and 'config-reloader' containers. See https://kubernetes.io/docs/concepts/containers/images/#image-pull-policy for more details. |
|
|
An optional list of references to secrets in the same namespace to use for pulling prometheus and alertmanager images from registries see http://kubernetes.io/docs/user-guide/images#specifying-imagepullsecrets-on-a-pod |
|
|
LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace. |
|
|
InitContainers allows adding initContainers to the pod definition. Those can be used to e.g. fetch secrets for injection into the Prometheus configuration from external sources. Any errors during the execution of an initContainer will lead to a restart of the Pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ InitContainers described here modify an operator generated init containers if they share the same name and modifications are done via a strategic merge patch. The current init container name is: |
|
|
A single application container that you want to run within a pod. |
|
|
ListenLocal makes the Prometheus server listen on loopback, so that it does not bind against the Pod IP. |
|
|
Log format for Prometheus to be configured with. |
|
|
Log level for Prometheus to be configured with. |
|
|
Minimum number of seconds for which a newly created pod should be ready without any of its container crashing for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready) This is an alpha field from kubernetes 1.22 until 1.24 which requires enabling the StatefulSetMinReadySeconds feature gate. |
|
|
Define which Nodes the Pods are scheduled on. |
|
|
When true, Prometheus resolves label conflicts by renaming the labels in the scraped data to "exported_<label value>" for all targets created from service and pod monitors. Otherwise the HonorLabels field of the service or pod monitor applies. |
|
|
When true, Prometheus ignores the timestamps for all the targets created from service and pod monitors. Otherwise the HonorTimestamps field of the service or pod monitor applies. |
|
|
When a Prometheus deployment is paused, no actions except for deletion will be performed on the underlying objects. |
|
|
PodMetadata configures Labels and Annotations which are propagated to the prometheus pods. |
|
|
Namespace’s labels to match for PodMonitor discovery. If nil, only check own namespace. |
|
|
Experimental PodMonitors to be selected for target discovery.
If |
|
|
PodTargetLabels are added to all Pod/ServiceMonitors' podTargetLabels |
|
|
Port name used for the pods and governing service. Defaults to |
|
|
Priority class assigned to the Pods |
|
|
Experimental Namespaces to be selected for Probe discovery. If nil, only check own namespace. |
|
|
Experimental Probes to be selected for target discovery.
If |
|
|
Name of Prometheus external label used to denote Prometheus instance name. Defaults to the value of |
|
|
PrometheusRulesExcludedFromEnforce - list of prometheus rules to be excluded from enforcing of adding namespace labels. Works only if enforcedNamespaceLabel set to true. Make sure both ruleNamespace and ruleName are set for each pair. Deprecated: use excludedFromEnforcement instead. |
|
|
PrometheusRuleExcludeConfig enables users to configure excluded PrometheusRule names and their namespaces to be ignored while enforcing namespace label for alerts and metrics. |
|
|
QuerySpec defines the query command line flags when starting Prometheus. |
|
|
QueryLogFile specifies the file to which PromQL queries are logged. If the filename has an empty path, e.g. 'query.log', prometheus-operator will mount the file into an emptyDir volume at |
|
|
remoteRead is the list of remote read configurations. |
|
|
RemoteReadSpec defines the configuration for Prometheus to read back samples from a remote endpoint. |
|
|
remoteWrite is the list of remote write configurations. |
|
|
RemoteWriteSpec defines the configuration to write samples from Prometheus to a remote endpoint. |
|
|
Name of Prometheus external label used to denote replica name. Defaults to the value of |
|
|
Number of replicas of each shard to deploy for a Prometheus deployment. Number of replicas multiplied by shards is the total number of Pods created. |
|
|
Define resources requests and limits for single Pods. |
|
|
Time duration Prometheus shall retain data for. Default is '24h' if retentionSize is not set, and must match the regular expression |
|
|
Maximum amount of disk space used by blocks. |
|
|
The route prefix Prometheus registers HTTP handlers for. This is useful, if using ExternalURL and a proxy is rewriting HTTP routes of a request, and the actual ExternalURL is still true, but the server serves requests under a different route prefix. For example for use with |
|
|
Namespaces to be selected for PrometheusRules discovery. If unspecified, only the same namespace as the Prometheus object is in is used. |
|
|
A selector to select which PrometheusRules to mount for loading alerting/recording rules from. Until (excluding) Prometheus Operator v0.24.0 Prometheus Operator will migrate any legacy rule ConfigMaps to PrometheusRule custom resources selected by RuleSelector. Make sure it does not match any config maps that you do not want to be migrated. |
|
|
/--rules.*/ command-line arguments. |
|
|
Interval between consecutive scrapes. Default: |
|
|
Number of seconds to wait for target to respond before erroring. |
|
|
Secrets is a list of Secrets in the same namespace as the Prometheus object, which shall be mounted into the Prometheus Pods. Each Secret is added to the StatefulSet definition as a volume named |
|
|
SecurityContext holds pod-level security attributes and common container settings. This defaults to the default PodSecurityContext. |
|
|
ServiceAccountName is the name of the ServiceAccount to use to run the Prometheus Pods. |
|
|
Namespace’s labels to match for ServiceMonitor discovery. If nil, only check own namespace. |
|
|
ServiceMonitors to be selected for target discovery.
If |
|
|
SHA of Prometheus container image to be deployed. Defaults to the value of |
|
|
EXPERIMENTAL: Number of shards to distribute targets onto. Number of replicas multiplied by shards is the total number of Pods created. Note that scaling down shards will not reshard data onto remaining instances, it must be manually moved. Increasing shards will not reshard data either but it will continue to be available from the same instances. To query globally use Thanos sidecar and Thanos querier or remote write data to a central location. Sharding is done on the content of the |
|
|
Storage spec to specify how storage shall be used. |
|
|
Tag of Prometheus container image to be deployed. Defaults to the value of |
|
|
Thanos configuration allows configuring various aspects of a Prometheus server in a Thanos environment. This section is experimental, it may change significantly without deprecation notice in any release. |
|
|
If specified, the pod’s tolerations. |
|
|
The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>. |
|
|
If specified, the pod’s topology spread constraints. |
|
|
TopologySpreadConstraint specifies how to spread matching pods among the given topology. |
|
|
Defines the runtime reloadable configuration of the timeseries database (TSDB). |
|
|
Version of Prometheus to be deployed. |
|
|
VolumeMounts allows configuration of additional VolumeMounts on the output StatefulSet definition. VolumeMounts specified will be appended to other VolumeMounts in the prometheus container, that are generated as a result of StorageSpec objects. |
|
|
VolumeMount describes a mounting of a Volume within a container. |
|
|
Volumes allows configuration of additional volumes on the output StatefulSet definition. Volumes specified will be appended to other volumes that are generated as a result of StorageSpec objects. |
|
|
Volume represents a named volume in a pod that may be accessed by any container in the pod. |
|
|
Enable compression of the write-ahead log using Snappy. This flag is only available in versions of Prometheus >= 2.11.0. |
|
|
Defines the web command line flags when starting Prometheus. |
AdditionalAlertManagerConfigs allows specifying a key of a Secret containing additional Prometheus AlertManager configurations. AlertManager configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alertmanager_config. As AlertManager configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible AlertManager configs are going to break Prometheus after the upgrade.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
AdditionalAlertRelabelConfigs allows specifying a key of a Secret containing additional Prometheus alert relabel configurations. Alert relabel configurations specified are appended to the configurations generated by the Prometheus Operator. Alert relabel configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alert_relabel_configs. As alert relabel configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible alert relabel configs are going to break Prometheus after the upgrade.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
AdditionalArgs allows setting additional arguments for the Prometheus container. It is intended for e.g. activating hidden flags which are not supported by the dedicated configuration options yet. The arguments are passed as-is to the Prometheus container which may cause issues if they are invalid or not supported by the given Prometheus version. In case of an argument conflict (e.g. an argument which is already set by the operator itself) or when providing an invalid argument the reconciliation will fail and an error will be logged.
array
Argument as part of the AdditionalArgs list.
object
name
Property | Type | Description |
---|---|---|
|
|
Name of the argument, e.g. "scrape.discovery-reload-interval". |
|
|
Argument value, e.g. 30s. Can be empty for name-only arguments (e.g. --storage.tsdb.no-lockfile) |
AdditionalScrapeConfigs allows specifying a key of a Secret containing additional Prometheus scrape configurations. Scrape configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config. As scrape configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible scrape configs are going to break Prometheus after the upgrade.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
If specified, the pod’s scheduling constraints.
object
Property | Type | Description |
---|---|---|
|
|
Describes node affinity scheduling rules for the pod. |
|
|
Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)). |
|
|
Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)). |
Describes node affinity scheduling rules for the pod.
object
Property | Type | Description |
---|---|---|
|
|
The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred. |
|
|
An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op). |
|
|
If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node. |
The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.
array
An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).
object
preference
weight
Property | Type | Description |
---|---|---|
|
|
A node selector term, associated with the corresponding weight. |
|
|
Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100. |
A node selector term, associated with the corresponding weight.
object
Property | Type | Description |
---|---|---|
|
|
A list of node selector requirements by node’s labels. |
|
|
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
A list of node selector requirements by node’s fields. |
|
|
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
A list of node selector requirements by node’s labels.
array
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
The label key that the selector applies to. |
|
|
Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. |
|
|
An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch. |
A list of node selector requirements by node’s fields.
array
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
The label key that the selector applies to. |
|
|
Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. |
|
|
An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch. |
If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.
object
nodeSelectorTerms
Property | Type | Description |
---|---|---|
|
|
Required. A list of node selector terms. The terms are ORed. |
|
|
A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm. |
Required. A list of node selector terms. The terms are ORed.
array
A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.
object
Property | Type | Description |
---|---|---|
|
|
A list of node selector requirements by node’s labels. |
|
|
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
A list of node selector requirements by node’s fields. |
|
|
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
A list of node selector requirements by node’s labels.
array
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
The label key that the selector applies to. |
|
|
Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. |
|
|
An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch. |
A list of node selector requirements by node’s fields.
array
A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
The label key that the selector applies to. |
|
|
Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. |
|
|
An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch. |
Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).
object
Property | Type | Description |
---|---|---|
|
|
The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred. |
|
|
The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s) |
|
|
If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied. |
|
|
Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running |
The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.
array
The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)
object
podAffinityTerm
weight
Property | Type | Description |
---|---|---|
|
|
Required. A pod affinity term, associated with the corresponding weight. |
|
|
weight associated with matching the corresponding podAffinityTerm, in the range 1-100. |
Required. A pod affinity term, associated with the corresponding weight.
object
topologyKey
Property | Type | Description |
---|---|---|
|
|
A label query over a set of resources, in this case pods. |
|
|
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces. |
|
|
namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace". |
|
|
This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed. |
A label query over a set of resources, in this case pods.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.
array
Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running
object
topologyKey
Property | Type | Description |
---|---|---|
|
|
A label query over a set of resources, in this case pods. |
|
|
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces. |
|
|
namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace". |
|
|
This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed. |
A label query over a set of resources, in this case pods.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).
object
Property | Type | Description |
---|---|---|
|
|
The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred. |
|
|
The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s) |
|
|
If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied. |
|
|
Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running |
The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.
array
The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)
object
podAffinityTerm
weight
Property | Type | Description |
---|---|---|
|
|
Required. A pod affinity term, associated with the corresponding weight. |
|
|
weight associated with matching the corresponding podAffinityTerm, in the range 1-100. |
Required. A pod affinity term, associated with the corresponding weight.
object
topologyKey
Property | Type | Description |
---|---|---|
|
|
A label query over a set of resources, in this case pods. |
|
|
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces. |
|
|
namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace". |
|
|
This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed. |
A label query over a set of resources, in this case pods.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.
array
Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running
object
topologyKey
Property | Type | Description |
---|---|---|
|
|
A label query over a set of resources, in this case pods. |
|
|
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces. |
|
|
namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace". |
|
|
This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed. |
A label query over a set of resources, in this case pods.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
Define details regarding alerting.
object
alertmanagers
Property | Type | Description |
---|---|---|
|
|
AlertmanagerEndpoints Prometheus should fire alerts against. |
|
|
AlertmanagerEndpoints defines a selection of a single Endpoints object containing alertmanager IPs to fire alerts against. |
AlertmanagerEndpoints Prometheus should fire alerts against.
array
AlertmanagerEndpoints defines a selection of a single Endpoints object containing alertmanager IPs to fire alerts against.
object
name
namespace
port
Property | Type | Description |
---|---|---|
|
|
Version of the Alertmanager API that Prometheus uses to send alerts. It can be "v1" or "v2". |
|
|
Authorization section for this alertmanager endpoint |
|
|
BasicAuth allow an endpoint to authenticate over basic authentication |
|
|
BearerTokenFile to read from filesystem to use when authenticating to Alertmanager. |
|
|
Whether to enable HTTP2. |
|
|
Name of Endpoints object in Namespace. |
|
|
Namespace of Endpoints object. |
|
|
Prefix for the HTTP path alerts are pushed to. |
|
|
Port the Alertmanager API is exposed on. |
|
|
Scheme to use when firing alerts. |
|
|
Timeout is a per-target Alertmanager timeout when pushing alerts. |
|
|
TLS Config to use for alertmanager connection. |
Authorization section for this alertmanager endpoint
object
Property | Type | Description |
---|---|---|
|
|
The secret’s key that contains the credentials of the request |
|
|
Set the authentication type. Defaults to Bearer, Basic will cause an error |
The secret’s key that contains the credentials of the request
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
BasicAuth allow an endpoint to authenticate over basic authentication
object
Property | Type | Description |
---|---|---|
|
|
The secret in the service monitor namespace that contains the password for authentication. |
|
|
The secret in the service monitor namespace that contains the username for authentication. |
The secret in the service monitor namespace that contains the password for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
The secret in the service monitor namespace that contains the username for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
TLS Config to use for alertmanager connection.
object
Property | Type | Description |
---|---|---|
|
|
Certificate authority used when verifying server certificates. |
|
|
Path to the CA cert in the Prometheus container to use for the targets. |
|
|
Client certificate to present when doing client-authentication. |
|
|
Path to the client cert file in the Prometheus container for the targets. |
|
|
Disable target certificate validation. |
|
|
Path to the client key file in the Prometheus container for the targets. |
|
|
Secret containing the client key file for the targets. |
|
|
Used to verify the hostname for the targets. |
Certificate authority used when verifying server certificates.
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
Client certificate to present when doing client-authentication.
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
Secret containing the client key file for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
APIServerConfig allows specifying a host and auth methods to access apiserver. If left empty, Prometheus is assumed to run inside of the cluster and will discover API servers automatically and use the pod’s CA certificate and bearer token file at /var/run/secrets/kubernetes.io/serviceaccount/.
object
host
Property | Type | Description |
---|---|---|
|
|
Authorization section for accessing apiserver |
|
|
BasicAuth allow an endpoint to authenticate over basic authentication |
|
|
Bearer token for accessing apiserver. |
|
|
File to read bearer token for accessing apiserver. |
|
|
Host of apiserver. A valid string consisting of a hostname or IP followed by an optional port number |
|
|
TLS Config to use for accessing apiserver. |
Authorization section for accessing apiserver
object
Property | Type | Description |
---|---|---|
|
|
The secret’s key that contains the credentials of the request |
|
|
File to read a secret from, mutually exclusive with Credentials (from SafeAuthorization) |
|
|
Set the authentication type. Defaults to Bearer, Basic will cause an error |
The secret’s key that contains the credentials of the request
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
BasicAuth allow an endpoint to authenticate over basic authentication
object
Property | Type | Description |
---|---|---|
|
|
The secret in the service monitor namespace that contains the password for authentication. |
|
|
The secret in the service monitor namespace that contains the username for authentication. |
The secret in the service monitor namespace that contains the password for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
The secret in the service monitor namespace that contains the username for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
TLS Config to use for accessing apiserver.
object
Property | Type | Description |
---|---|---|
|
|
Certificate authority used when verifying server certificates. |
|
|
Path to the CA cert in the Prometheus container to use for the targets. |
|
|
Client certificate to present when doing client-authentication. |
|
|
Path to the client cert file in the Prometheus container for the targets. |
|
|
Disable target certificate validation. |
|
|
Path to the client key file in the Prometheus container for the targets. |
|
|
Secret containing the client key file for the targets. |
|
|
Used to verify the hostname for the targets. |
Certificate authority used when verifying server certificates.
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
Client certificate to present when doing client-authentication.
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
Secret containing the client key file for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
ArbitraryFSAccessThroughSMs configures whether configuration based on a service monitor can access arbitrary files on the file system of the Prometheus container e.g. bearer token files.
object
Property | Type | Description |
---|---|---|
|
|
Containers allows injecting additional containers or modifying operator generated containers. This can be used to allow adding an authentication proxy to a Prometheus pod or to change the behavior of an operator generated container. Containers described here modify an operator generated container if they share the same name and modifications are done via a strategic merge patch. The current container names are: prometheus
, config-reloader
, and thanos-sidecar
. Overriding containers is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice.
array
A single application container that you want to run within a pod.
object
name
Property | Type | Description |
---|---|---|
|
|
Arguments to the entrypoint. The container image’s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell |
|
|
Entrypoint array. Not executed within a shell. The container image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell |
|
|
List of environment variables to set in the container. Cannot be updated. |
|
|
EnvVar represents an environment variable present in a Container. |
|
|
List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated. |
|
|
EnvFromSource represents the source of a set of ConfigMaps |
|
|
Container image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets. |
|
|
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images |
|
|
Actions that the management system should take in response to container lifecycle events. Cannot be updated. |
|
|
Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated. |
|
|
List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated. |
|
|
ContainerPort represents a network port in a single container. |
|
|
Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ |
|
|
SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ |
|
|
StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod’s lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false. |
|
|
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false |
|
|
Optional: Path at which the file to which the container’s termination message will be written is mounted into the container’s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated. |
|
|
Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated. |
|
|
Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false. |
|
|
volumeDevices is the list of block devices to be used by the container. |
|
|
volumeDevice describes a mapping of a raw block device within a container. |
|
|
Pod volumes to mount into the container’s filesystem. Cannot be updated. |
|
|
VolumeMount describes a mounting of a Volume within a container. |
|
|
Container’s working directory. If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated. |
List of environment variables to set in the container. Cannot be updated.
array
EnvVar represents an environment variable present in a Container.
object
name
Property | Type | Description |
---|---|---|
|
|
Name of the environment variable. Must be a C_IDENTIFIER. |
|
|
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "". |
|
|
Source for the environment variable’s value. Cannot be used if value is not empty. |
Source for the environment variable’s value. Cannot be used if value is not empty.
object
Property | Type | Description |
---|---|---|
|
|
Selects a key of a ConfigMap. |
|
|
Selects a field of the pod: supports metadata.name, metadata.namespace, |
|
|
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. |
|
|
Selects a key of a secret in the pod’s namespace |
Selects a key of a ConfigMap.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>']
, metadata.annotations['<KEY>']
, spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
object
fieldPath
Property | Type | Description |
---|---|---|
|
|
Version of the schema the FieldPath is written in terms of, defaults to "v1". |
|
|
Path of the field to select in the specified API version. |
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
object
resource
Property | Type | Description |
---|---|---|
|
|
Container name: required for volumes, optional for env vars |
|
|
Specifies the output format of the exposed resources, defaults to "1" |
|
|
Required: resource to select |
Selects a key of a secret in the pod’s namespace
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.
array
EnvFromSource represents the source of a set of ConfigMaps
object
Property | Type | Description |
---|---|---|
|
|
The ConfigMap to select from |
|
|
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER. |
|
|
The Secret to select from |
The ConfigMap to select from
object
Property | Type | Description |
---|---|---|
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap must be defined |
The Secret to select from
object
Property | Type | Description |
---|---|---|
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret must be defined |
Actions that the management system should take in response to container lifecycle events. Cannot be updated.
object
Property | Type | Description |
---|---|---|
|
|
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks |
|
|
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod’s termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod’s termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks |
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified. |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod’s termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod’s termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified. |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. |
|
|
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1. |
|
|
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. |
|
|
TCPSocket specifies an action involving a TCP port. |
|
|
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. |
|
|
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.
object
port
Property | Type | Description |
---|---|---|
|
|
Port number of the gRPC service. Number must be in the range 1 to 65535. |
|
|
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
TCPSocket specifies an action involving a TCP port.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.
array
ContainerPort represents a network port in a single container.
object
containerPort
Property | Type | Description |
---|---|---|
|
|
Number of port to expose on the pod’s IP address. This must be a valid port number, 0 < x < 65536. |
|
|
What host IP to bind the external port to. |
|
|
Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this. |
|
|
If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services. |
|
|
Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP". |
Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. |
|
|
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1. |
|
|
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. |
|
|
TCPSocket specifies an action involving a TCP port. |
|
|
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. |
|
|
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.
object
port
Property | Type | Description |
---|---|---|
|
|
Port number of the gRPC service. Number must be in the range 1 to 65535. |
|
|
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
TCPSocket specifies an action involving a TCP port.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
object
Property | Type | Description |
---|---|---|
|
|
Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable. |
|
|
ResourceClaim references one entry in PodSpec.ResourceClaims. |
|
|
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ |
|
|
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ |
Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable.
array
ResourceClaim references one entry in PodSpec.ResourceClaims.
object
name
Property | Type | Description |
---|---|---|
|
|
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container. |
SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
object
Property | Type | Description |
---|---|---|
|
|
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows. |
|
|
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows. |
|
|
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows. |
|
|
procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows. |
|
|
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows. |
|
|
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. |
|
|
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. |
|
|
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. |
|
|
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. |
|
|
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows. |
|
|
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux. |
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
object
Property | Type | Description |
---|---|---|
|
|
Added capabilities |
|
|
Removed capabilities |
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
object
Property | Type | Description |
---|---|---|
|
|
Level is SELinux level label that applies to the container. |
|
|
Role is a SELinux role label that applies to the container. |
|
|
Type is a SELinux type label that applies to the container. |
|
|
User is a SELinux user label that applies to the container. |
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
object
type
Property | Type | Description |
---|---|---|
|
|
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet’s configured seccomp profile location. Must only be set if type is "Localhost". |
|
|
type indicates which kind of seccomp profile will be applied. Valid options are: Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied. |
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
object
Property | Type | Description |
---|---|---|
|
|
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field. |
|
|
GMSACredentialSpecName is the name of the GMSA credential spec to use. |
|
|
HostProcess determines if a container should be run as a 'Host Process' container. This field is alpha-level and will only be honored by components that enable the WindowsHostProcessContainers feature flag. Setting this field without the feature flag will result in errors when validating the Pod. All of a Pod’s containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true. |
|
|
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. |
StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod’s lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. |
|
|
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1. |
|
|
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. |
|
|
TCPSocket specifies an action involving a TCP port. |
|
|
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. |
|
|
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.
object
port
Property | Type | Description |
---|---|---|
|
|
Port number of the gRPC service. Number must be in the range 1 to 65535. |
|
|
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
TCPSocket specifies an action involving a TCP port.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
volumeDevices is the list of block devices to be used by the container.
array
volumeDevice describes a mapping of a raw block device within a container.
object
devicePath
name
Property | Type | Description |
---|---|---|
|
|
devicePath is the path inside of the container that the device will be mapped to. |
|
|
name must match the name of a persistentVolumeClaim in the pod |
Pod volumes to mount into the container’s filesystem. Cannot be updated.
array
VolumeMount describes a mounting of a Volume within a container.
object
mountPath
name
Property | Type | Description |
---|---|---|
|
|
Path within the container at which the volume should be mounted. Must not contain ':'. |
|
|
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. |
|
|
This must match the Name of a Volume. |
|
|
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false. |
|
|
Path within the volume from which the container’s volume should be mounted. Defaults to "" (volume’s root). |
|
|
Expanded path within the volume from which the container’s volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container’s environment. Defaults to "" (volume’s root). SubPathExpr and SubPath are mutually exclusive. |
List of references to PodMonitor, ServiceMonitor, Probe and PrometheusRule objects to be excluded from enforcing a namespace label of origin. Applies only if enforcedNamespaceLabel set to true.
array
ObjectReference references a PodMonitor, ServiceMonitor, Probe or PrometheusRule object.
object
namespace
resource
Property | Type | Description |
---|---|---|
|
|
Group of the referent. When not specified, it defaults to |
|
|
Name of the referent. When not set, all resources are matched. |
|
|
Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/ |
|
|
Resource of the referent. |
Exemplars related settings that are runtime reloadable. It requires to enable the exemplar storage feature to be effective.
object
Property | Type | Description |
---|---|---|
|
|
Maximum number of exemplars stored in memory for all series. If not set, Prometheus uses its default value. A value of zero or less than zero disables the storage. |
HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.
object
hostnames
ip
Property | Type | Description |
---|---|---|
|
|
Hostnames for the above IP address. |
|
|
IP address of the host file entry. |
An optional list of references to secrets in the same namespace to use for pulling prometheus and alertmanager images from registries see http://kubernetes.io/docs/user-guide/images#specifying-imagepullsecrets-on-a-pod
array
LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.
object
Property | Type | Description |
---|---|---|
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
InitContainers allows adding initContainers to the pod definition. Those can be used to e.g. fetch secrets for injection into the Prometheus configuration from external sources. Any errors during the execution of an initContainer will lead to a restart of the Pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ InitContainers described here modify an operator generated init containers if they share the same name and modifications are done via a strategic merge patch. The current init container name is: init-config-reloader
. Overriding init containers is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice.
array
A single application container that you want to run within a pod.
object
name
Property | Type | Description |
---|---|---|
|
|
Arguments to the entrypoint. The container image’s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell |
|
|
Entrypoint array. Not executed within a shell. The container image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell |
|
|
List of environment variables to set in the container. Cannot be updated. |
|
|
EnvVar represents an environment variable present in a Container. |
|
|
List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated. |
|
|
EnvFromSource represents the source of a set of ConfigMaps |
|
|
Container image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets. |
|
|
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images |
|
|
Actions that the management system should take in response to container lifecycle events. Cannot be updated. |
|
|
Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated. |
|
|
List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated. |
|
|
ContainerPort represents a network port in a single container. |
|
|
Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ |
|
|
SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ |
|
|
StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod’s lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false. |
|
|
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false |
|
|
Optional: Path at which the file to which the container’s termination message will be written is mounted into the container’s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated. |
|
|
Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated. |
|
|
Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false. |
|
|
volumeDevices is the list of block devices to be used by the container. |
|
|
volumeDevice describes a mapping of a raw block device within a container. |
|
|
Pod volumes to mount into the container’s filesystem. Cannot be updated. |
|
|
VolumeMount describes a mounting of a Volume within a container. |
|
|
Container’s working directory. If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated. |
List of environment variables to set in the container. Cannot be updated.
array
EnvVar represents an environment variable present in a Container.
object
name
Property | Type | Description |
---|---|---|
|
|
Name of the environment variable. Must be a C_IDENTIFIER. |
|
|
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "". |
|
|
Source for the environment variable’s value. Cannot be used if value is not empty. |
Source for the environment variable’s value. Cannot be used if value is not empty.
object
Property | Type | Description |
---|---|---|
|
|
Selects a key of a ConfigMap. |
|
|
Selects a field of the pod: supports metadata.name, metadata.namespace, |
|
|
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. |
|
|
Selects a key of a secret in the pod’s namespace |
Selects a key of a ConfigMap.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>']
, metadata.annotations['<KEY>']
, spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
object
fieldPath
Property | Type | Description |
---|---|---|
|
|
Version of the schema the FieldPath is written in terms of, defaults to "v1". |
|
|
Path of the field to select in the specified API version. |
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
object
resource
Property | Type | Description |
---|---|---|
|
|
Container name: required for volumes, optional for env vars |
|
|
Specifies the output format of the exposed resources, defaults to "1" |
|
|
Required: resource to select |
Selects a key of a secret in the pod’s namespace
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.
array
EnvFromSource represents the source of a set of ConfigMaps
object
Property | Type | Description |
---|---|---|
|
|
The ConfigMap to select from |
|
|
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER. |
|
|
The Secret to select from |
The ConfigMap to select from
object
Property | Type | Description |
---|---|---|
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap must be defined |
The Secret to select from
object
Property | Type | Description |
---|---|---|
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret must be defined |
Actions that the management system should take in response to container lifecycle events. Cannot be updated.
object
Property | Type | Description |
---|---|---|
|
|
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks |
|
|
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod’s termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod’s termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks |
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified. |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod’s termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod’s termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified. |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. |
|
|
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1. |
|
|
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. |
|
|
TCPSocket specifies an action involving a TCP port. |
|
|
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. |
|
|
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.
object
port
Property | Type | Description |
---|---|---|
|
|
Port number of the gRPC service. Number must be in the range 1 to 65535. |
|
|
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
TCPSocket specifies an action involving a TCP port.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.
array
ContainerPort represents a network port in a single container.
object
containerPort
Property | Type | Description |
---|---|---|
|
|
Number of port to expose on the pod’s IP address. This must be a valid port number, 0 < x < 65536. |
|
|
What host IP to bind the external port to. |
|
|
Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this. |
|
|
If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services. |
|
|
Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP". |
Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. |
|
|
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1. |
|
|
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. |
|
|
TCPSocket specifies an action involving a TCP port. |
|
|
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. |
|
|
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.
object
port
Property | Type | Description |
---|---|---|
|
|
Port number of the gRPC service. Number must be in the range 1 to 65535. |
|
|
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
TCPSocket specifies an action involving a TCP port.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
object
Property | Type | Description |
---|---|---|
|
|
Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable. |
|
|
ResourceClaim references one entry in PodSpec.ResourceClaims. |
|
|
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ |
|
|
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ |
Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable.
array
ResourceClaim references one entry in PodSpec.ResourceClaims.
object
name
Property | Type | Description |
---|---|---|
|
|
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container. |
SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
object
Property | Type | Description |
---|---|---|
|
|
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows. |
|
|
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows. |
|
|
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows. |
|
|
procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows. |
|
|
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows. |
|
|
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. |
|
|
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. |
|
|
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. |
|
|
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. |
|
|
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows. |
|
|
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux. |
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
object
Property | Type | Description |
---|---|---|
|
|
Added capabilities |
|
|
Removed capabilities |
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
object
Property | Type | Description |
---|---|---|
|
|
Level is SELinux level label that applies to the container. |
|
|
Role is a SELinux role label that applies to the container. |
|
|
Type is a SELinux type label that applies to the container. |
|
|
User is a SELinux user label that applies to the container. |
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
object
type
Property | Type | Description |
---|---|---|
|
|
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet’s configured seccomp profile location. Must only be set if type is "Localhost". |
|
|
type indicates which kind of seccomp profile will be applied. Valid options are: Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied. |
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
object
Property | Type | Description |
---|---|---|
|
|
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field. |
|
|
GMSACredentialSpecName is the name of the GMSA credential spec to use. |
|
|
HostProcess determines if a container should be run as a 'Host Process' container. This field is alpha-level and will only be honored by components that enable the WindowsHostProcessContainers feature flag. Setting this field without the feature flag will result in errors when validating the Pod. All of a Pod’s containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true. |
|
|
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. |
StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod’s lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
object
Property | Type | Description |
---|---|---|
|
|
Exec specifies the action to take. |
|
|
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. |
|
|
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate. |
|
|
HTTPGet specifies the http request to perform. |
|
|
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
|
|
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1. |
|
|
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. |
|
|
TCPSocket specifies an action involving a TCP port. |
|
|
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. |
|
|
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes |
Exec specifies the action to take.
object
Property | Type | Description |
---|---|---|
|
|
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy. |
GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.
object
port
Property | Type | Description |
---|---|---|
|
|
Port number of the gRPC service. Number must be in the range 1 to 65535. |
|
|
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC. |
HTTPGet specifies the http request to perform.
object
port
Property | Type | Description |
---|---|---|
|
|
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. |
|
|
Custom headers to set in the request. HTTP allows repeated headers. |
|
|
HTTPHeader describes a custom header to be used in HTTP probes |
|
|
Path to access on the HTTP server. |
|
|
Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
|
|
Scheme to use for connecting to the host. Defaults to HTTP. |
Custom headers to set in the request. HTTP allows repeated headers.
array
HTTPHeader describes a custom header to be used in HTTP probes
object
name
value
Property | Type | Description |
---|---|---|
|
|
The header field name |
|
|
The header field value |
TCPSocket specifies an action involving a TCP port.
object
port
Property | Type | Description |
---|---|---|
|
|
Optional: Host name to connect to, defaults to the pod IP. |
|
|
Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. |
volumeDevices is the list of block devices to be used by the container.
array
volumeDevice describes a mapping of a raw block device within a container.
object
devicePath
name
Property | Type | Description |
---|---|---|
|
|
devicePath is the path inside of the container that the device will be mapped to. |
|
|
name must match the name of a persistentVolumeClaim in the pod |
Pod volumes to mount into the container’s filesystem. Cannot be updated.
array
VolumeMount describes a mounting of a Volume within a container.
object
mountPath
name
Property | Type | Description |
---|---|---|
|
|
Path within the container at which the volume should be mounted. Must not contain ':'. |
|
|
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. |
|
|
This must match the Name of a Volume. |
|
|
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false. |
|
|
Path within the volume from which the container’s volume should be mounted. Defaults to "" (volume’s root). |
|
|
Expanded path within the volume from which the container’s volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container’s environment. Defaults to "" (volume’s root). SubPathExpr and SubPath are mutually exclusive. |
PodMetadata configures Labels and Annotations which are propagated to the prometheus pods.
object
Property | Type | Description |
---|---|---|
|
|
Annotations is an unstructured key value map stored with a resource that may be set by external tools to store and retrieve arbitrary metadata. They are not queryable and should be preserved when modifying objects. More info: http://kubernetes.io/docs/user-guide/annotations |
|
|
Map of string keys and values that can be used to organize and categorize (scope and select) objects. May match selectors of replication controllers and services. More info: http://kubernetes.io/docs/user-guide/labels |
|
|
Name must be unique within a namespace. Is required when creating resources, although some resources may allow a client to request the generation of an appropriate name automatically. Name is primarily intended for creation idempotence and configuration definition. Cannot be updated. More info: http://kubernetes.io/docs/user-guide/identifiers#names |
Namespace’s labels to match for PodMonitor discovery. If nil, only check own namespace.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
Experimental PodMonitors to be selected for target discovery.
If spec.serviceMonitorSelector
, spec.podMonitorSelector
and spec.probeSelector
are null, the Prometheus configuration is unmanaged. The Prometheus operator will ensure that the Prometheus configuration’s Secret exists, but it is the responsibility of the user to provide the raw gzipped Prometheus configuration under the prometheus.yaml.gz
key. This behavior is deprecated and will be removed in the next major version of the custom resource definition. It is recommended to use spec.additionalScrapeConfigs
instead.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
Experimental Namespaces to be selected for Probe discovery. If nil, only check own namespace.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
Experimental Probes to be selected for target discovery.
If spec.serviceMonitorSelector
, spec.podMonitorSelector
and spec.probeSelector
are null, the Prometheus configuration is unmanaged. The Prometheus operator will ensure that the Prometheus configuration’s Secret exists, but it is the responsibility of the user to provide the raw gzipped Prometheus configuration under the prometheus.yaml.gz
key. This behavior is deprecated and will be removed in the next major version of the custom resource definition. It is recommended to use spec.additionalScrapeConfigs
instead.
object
Property | Type | Description |
---|---|---|
|
|
matchExpressions is a list of label selector requirements. The requirements are ANDed. |
|
|
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. |
|
|
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. |
matchExpressions is a list of label selector requirements. The requirements are ANDed.
array
A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
object
key
operator
Property | Type | Description |
---|---|---|
|
|
key is the label key that the selector applies to. |
|
|
operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. |
|
|
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. |
PrometheusRulesExcludedFromEnforce - list of prometheus rules to be excluded from enforcing of adding namespace labels. Works only if enforcedNamespaceLabel set to true. Make sure both ruleNamespace and ruleName are set for each pair. Deprecated: use excludedFromEnforcement instead.
array
PrometheusRuleExcludeConfig enables users to configure excluded PrometheusRule names and their namespaces to be ignored while enforcing namespace label for alerts and metrics.
object
ruleName
ruleNamespace
Property | Type | Description |
---|---|---|
|
|
RuleNamespace - name of excluded rule |
|
|
RuleNamespace - namespace of excluded rule |
QuerySpec defines the query command line flags when starting Prometheus.
object
Property | Type | Description |
---|---|---|
|
|
The delta difference allowed for retrieving metrics during expression evaluations. |
|
|
Number of concurrent queries that can be run at once. |
|
|
Maximum number of samples a single query can load into memory. Note that queries will fail if they would load more samples than this into memory, so this also limits the number of samples a query can return. |
|
|
Maximum time a query may take before being aborted. |
RemoteReadSpec defines the configuration for Prometheus to read back samples from a remote endpoint.
object
url
Property | Type | Description |
---|---|---|
|
|
Authorization section for remote read |
|
|
BasicAuth for the URL. |
|
|
Bearer token for remote read. |
|
|
File to read bearer token for remote read. |
|
|
Whether to use the external labels as selectors for the remote read endpoint. Requires Prometheus v2.34.0 and above. |
|
|
Custom HTTP headers to be sent along with each remote read request. Be aware that headers that are set by Prometheus itself can’t be overwritten. Only valid in Prometheus versions 2.26.0 and newer. |
|
|
The name of the remote read queue, it must be unique if specified. The name is used in metrics and logging in order to differentiate read configurations. Only valid in Prometheus versions 2.15.0 and newer. |
|
|
OAuth2 for the URL. Only valid in Prometheus versions 2.27.0 and newer. |
|
|
Optional ProxyURL. |
|
|
Whether reads should be made for queries for time ranges that the local storage should have complete data for. |
|
|
Timeout for requests to the remote read endpoint. |
|
|
An optional list of equality matchers which have to be present in a selector to query the remote read endpoint. |
|
|
TLS Config to use for remote read. |
|
|
The URL of the endpoint to query from. |
Authorization section for remote read
object
Property | Type | Description |
---|---|---|
|
|
The secret’s key that contains the credentials of the request |
|
|
File to read a secret from, mutually exclusive with Credentials (from SafeAuthorization) |
|
|
Set the authentication type. Defaults to Bearer, Basic will cause an error |
The secret’s key that contains the credentials of the request
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
BasicAuth for the URL.
object
Property | Type | Description |
---|---|---|
|
|
The secret in the service monitor namespace that contains the password for authentication. |
|
|
The secret in the service monitor namespace that contains the username for authentication. |
The secret in the service monitor namespace that contains the password for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
The secret in the service monitor namespace that contains the username for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
OAuth2 for the URL. Only valid in Prometheus versions 2.27.0 and newer.
object
clientId
clientSecret
tokenUrl
Property | Type | Description |
---|---|---|
|
|
The secret or configmap containing the OAuth2 client id |
|
|
The secret containing the OAuth2 client secret |
|
|
Parameters to append to the token URL |
|
|
OAuth2 scopes used for the token request |
|
|
The URL to fetch the token from |
The secret or configmap containing the OAuth2 client id
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
The secret containing the OAuth2 client secret
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
TLS Config to use for remote read.
object
Property | Type | Description |
---|---|---|
|
|
Certificate authority used when verifying server certificates. |
|
|
Path to the CA cert in the Prometheus container to use for the targets. |
|
|
Client certificate to present when doing client-authentication. |
|
|
Path to the client cert file in the Prometheus container for the targets. |
|
|
Disable target certificate validation. |
|
|
Path to the client key file in the Prometheus container for the targets. |
|
|
Secret containing the client key file for the targets. |
|
|
Used to verify the hostname for the targets. |
Certificate authority used when verifying server certificates.
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
Client certificate to present when doing client-authentication.
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
Secret containing the client key file for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
RemoteWriteSpec defines the configuration to write samples from Prometheus to a remote endpoint.
object
url
Property | Type | Description |
---|---|---|
|
|
Authorization section for remote write |
|
|
BasicAuth for the URL. |
|
|
Bearer token for remote write. |
|
|
File to read bearer token for remote write. |
|
|
Custom HTTP headers to be sent along with each remote write request. Be aware that headers that are set by Prometheus itself can’t be overwritten. Only valid in Prometheus versions 2.25.0 and newer. |
|
|
MetadataConfig configures the sending of series metadata to the remote storage. |
|
|
The name of the remote write queue, it must be unique if specified. The name is used in metrics and logging in order to differentiate queues. Only valid in Prometheus versions 2.15.0 and newer. |
|
|
OAuth2 for the URL. Only valid in Prometheus versions 2.27.0 and newer. |
|
|
Optional ProxyURL. |
|
|
QueueConfig allows tuning of the remote write queue parameters. |
|
|
Timeout for requests to the remote write endpoint. |
|
|
Enables sending of exemplars over remote write. Note that exemplar-storage itself must be enabled using the enableFeature option for exemplars to be scraped in the first place. Only valid in Prometheus versions 2.27.0 and newer. |
|
|
Sigv4 allows to configures AWS’s Signature Verification 4 |
|
|
TLS Config to use for remote write. |
|
|
The URL of the endpoint to send samples to. |
|
|
The list of remote write relabel configurations. |
|
|
RelabelConfig allows dynamic rewriting of the label set, being applied to samples before ingestion. It defines |
Authorization section for remote write
object
Property | Type | Description |
---|---|---|
|
|
The secret’s key that contains the credentials of the request |
|
|
File to read a secret from, mutually exclusive with Credentials (from SafeAuthorization) |
|
|
Set the authentication type. Defaults to Bearer, Basic will cause an error |
The secret’s key that contains the credentials of the request
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
BasicAuth for the URL.
object
Property | Type | Description |
---|---|---|
|
|
The secret in the service monitor namespace that contains the password for authentication. |
|
|
The secret in the service monitor namespace that contains the username for authentication. |
The secret in the service monitor namespace that contains the password for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
The secret in the service monitor namespace that contains the username for authentication.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
MetadataConfig configures the sending of series metadata to the remote storage.
object
Property | Type | Description |
---|---|---|
|
|
Whether metric metadata is sent to the remote storage or not. |
|
|
How frequently metric metadata is sent to the remote storage. |
OAuth2 for the URL. Only valid in Prometheus versions 2.27.0 and newer.
object
clientId
clientSecret
tokenUrl
Property | Type | Description |
---|---|---|
|
|
The secret or configmap containing the OAuth2 client id |
|
|
The secret containing the OAuth2 client secret |
|
|
Parameters to append to the token URL |
|
|
OAuth2 scopes used for the token request |
|
|
The URL to fetch the token from |
The secret or configmap containing the OAuth2 client id
object
Property | Type | Description |
---|---|---|
|
|
ConfigMap containing data to use for the targets. |
|
|
Secret containing data to use for the targets. |
ConfigMap containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key to select. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the ConfigMap or its key must be defined |
Secret containing data to use for the targets.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
The secret containing the OAuth2 client secret
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
QueueConfig allows tuning of the remote write queue parameters.
object
Property | Type | Description |
---|---|---|
|
|
BatchSendDeadline is the maximum time a sample will wait in buffer. |
|
|
Capacity is the number of samples to buffer per shard before we start dropping them. |
|
|
MaxBackoff is the maximum retry delay. |
|
|
MaxRetries is the maximum number of times to retry a batch on recoverable errors. |
|
|
MaxSamplesPerSend is the maximum number of samples per send. |
|
|
MaxShards is the maximum number of shards, i.e. amount of concurrency. |
|
|
MinBackoff is the initial retry delay. Gets doubled for every retry. |
|
|
MinShards is the minimum number of shards, i.e. amount of concurrency. |
|
|
Retry upon receiving a 429 status code from the remote-write storage. This is experimental feature and might change in the future. |
Sigv4 allows to configures AWS’s Signature Verification 4
object
Property | Type | Description |
---|---|---|
|
|
AccessKey is the AWS API key. If blank, the environment variable |
|
|
Profile is the named AWS profile used to authenticate. |
|
|
Region is the AWS region. If blank, the region from the default credentials chain used. |
|
|
RoleArn is the named AWS profile used to authenticate. |
|
|
SecretKey is the AWS API secret. If blank, the environment variable |
AccessKey is the AWS API key. If blank, the environment variable AWS_ACCESS_KEY_ID
is used.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
SecretKey is the AWS API secret. If blank, the environment variable AWS_SECRET_ACCESS_KEY
is used.
object
key
Property | Type | Description |
---|---|---|
|
|
The key of the secret to select from. Must be a valid secret key. |
|
|
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid? |
|
|
Specify whether the Secret or its key must be defined |
TLS Config to use for remote write.
object
Property | Type | Description |
---|---|---|
|
|
Certificate authority used when verifying server certificates. |
|
|
Path to the CA cert in the Prometheus container to use for the targets. |
|
|
Client certificate to present when doing client-authentication. |
|
|
Path to the client cert file in the Prometheus container for the targets. |
|
|
Disable target certificate validation. |
|
|
Path to the client key file in the Prometheus container for the targets. |
|
|