AdminNetworkPolicy [policy.networking.k8s.io/v1alpha1]

egress

array

Egress is the list of Egress rules to be applied to the selected pods. A total of 100 rules will be allowed in each ANP instance. The relative precedence of egress rules within a single ANP object (all of which share the priority) will be determined by the order in which the rule is written. Thus, a rule that appears at the top of the egress rules would take the highest precedence. ANPs with no egress rules do not affect egress traffic.

Support: Core

egress[]

object

AdminNetworkPolicyEgressRule describes an action to take on a particular set of traffic originating from pods selected by a AdminNetworkPolicy’s Subject field. <network-policy-api:experimental:validation>

ingress

array

Ingress is the list of Ingress rules to be applied to the selected pods. A total of 100 rules will be allowed in each ANP instance. The relative precedence of ingress rules within a single ANP object (all of which share the priority) will be determined by the order in which the rule is written. Thus, a rule that appears at the top of the ingress rules would take the highest precedence. ANPs with no ingress rules do not affect ingress traffic.

Support: Core

ingress[]

object

AdminNetworkPolicyIngressRule describes an action to take on a particular set of traffic destined for pods selected by an AdminNetworkPolicy’s Subject field.

priority

integer

Priority is a value from 0 to 1000. Rules with lower priority values have higher precedence, and are checked before rules with higher priority values. All AdminNetworkPolicy rules have higher precedence than NetworkPolicy or BaselineAdminNetworkPolicy rules The behavior is undefined if two ANP objects have same priority.

Support: Core

subject

object

Subject defines the pods to which this AdminNetworkPolicy applies. Note that host-networked pods are not included in subject selection.

Support: Core

action

string

Action specifies the effect this rule will have on matching traffic. Currently the following actions are supported: Allow: allows the selected traffic (even if it would otherwise have been denied by NetworkPolicy) Deny: denies the selected traffic Pass: instructs the selected traffic to skip any remaining ANP rules, and then pass execution to any NetworkPolicies that select the pod. If the pod is not selected by any NetworkPolicies then execution is passed to any BaselineAdminNetworkPolicies that select the pod.

Support: Core

name

string

Name is an identifier for this rule, that may be no more than 100 characters in length. This field should be used by the implementation to help improve observability, readability and error-reporting for any applied AdminNetworkPolicies.

Support: Core

ports

array

Ports allows for matching traffic based on port and protocols. This field is a list of destination ports for the outgoing egress traffic. If Ports is not set then the rule does not filter traffic via port.

Support: Core

ports[]

object

AdminNetworkPolicyPort describes how to select network ports on pod(s). Exactly one field must be set.

to

array

To is the List of destinations whose traffic this rule applies to. If any AdminNetworkPolicyEgressPeer matches the destination of outgoing traffic then the specified action is applied. This field must be defined and contain at least one item.

Support: Core

to[]

object

AdminNetworkPolicyEgressPeer defines a peer to allow traffic to. Exactly one of the selector pointers must be set for a given peer. If a consumer observes none of its fields are set, they must assume an unknown option has been specified and fail closed.

namedPort

string

NamedPort selects a port on a pod(s) based on name.

Support: Extended

<network-policy-api:experimental>

portNumber

object

Port selects a port on a pod(s) based on number.

Support: Core

portRange

object

PortRange selects a port range on a pod(s) based on provided start and end values.

Support: Core

port

integer

Number defines a network port value.

Support: Core

protocol

string

Protocol is the network protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.

Support: Core

end

integer

End defines a network port that is the end of a port range, the End value must be greater than Start.

Support: Core

protocol

string

Protocol is the network protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.

Support: Core

start

integer

Start defines a network port that is the start of a port range, the Start value must be less than End.

Support: Core

namespaces

object

Namespaces defines a way to select all pods within a set of Namespaces. Note that host-networked pods are not included in this type of peer.

Support: Core

networks

array (string)

Networks defines a way to select peers via CIDR blocks. This is intended for representing entities that live outside the cluster, which can’t be selected by pods, namespaces and nodes peers, but note that cluster-internal traffic will be checked against the rule as well. So if you Allow or Deny traffic to "0.0.0.0/0", that will allow or deny all IPv4 pod-to-pod traffic as well. If you don’t want that, add a rule that Passes all pod traffic before the Networks rule.

Each item in Networks should be provided in the CIDR format and should be IPv4 or IPv6, for example "10.0.0.0/8" or "fd00::/8".

Networks can have upto 25 CIDRs specified.

Support: Extended

<network-policy-api:experimental>

nodes

object

Nodes defines a way to select a set of nodes in the cluster. This field follows standard label selector semantics; if present but empty, it selects all Nodes.

Support: Extended

<network-policy-api:experimental>

pods

object

Pods defines a way to select a set of pods in a set of namespaces. Note that host-networked pods are not included in this type of peer.

Support: Core

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

namespaceSelector

object

NamespaceSelector follows standard label selector semantics; if empty, it selects all Namespaces.

podSelector

object

PodSelector is used to explicitly select pods within a namespace; if empty, it selects all Pods.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

action

string

Action specifies the effect this rule will have on matching traffic. Currently the following actions are supported: Allow: allows the selected traffic (even if it would otherwise have been denied by NetworkPolicy) Deny: denies the selected traffic Pass: instructs the selected traffic to skip any remaining ANP rules, and then pass execution to any NetworkPolicies that select the pod. If the pod is not selected by any NetworkPolicies then execution is passed to any BaselineAdminNetworkPolicies that select the pod.

Support: Core

from

array

From is the list of sources whose traffic this rule applies to. If any AdminNetworkPolicyIngressPeer matches the source of incoming traffic then the specified action is applied. This field must be defined and contain at least one item.

Support: Core

from[]

object

AdminNetworkPolicyIngressPeer defines an in-cluster peer to allow traffic from. Exactly one of the selector pointers must be set for a given peer. If a consumer observes none of its fields are set, they must assume an unknown option has been specified and fail closed.

name

string

Name is an identifier for this rule, that may be no more than 100 characters in length. This field should be used by the implementation to help improve observability, readability and error-reporting for any applied AdminNetworkPolicies.

Support: Core

ports

array

Ports allows for matching traffic based on port and protocols. This field is a list of ports which should be matched on the pods selected for this policy i.e the subject of the policy. So it matches on the destination port for the ingress traffic. If Ports is not set then the rule does not filter traffic via port.

Support: Core

ports[]

object

AdminNetworkPolicyPort describes how to select network ports on pod(s). Exactly one field must be set.

namespaces

object

Namespaces defines a way to select all pods within a set of Namespaces. Note that host-networked pods are not included in this type of peer.

Support: Core

pods

object

Pods defines a way to select a set of pods in a set of namespaces. Note that host-networked pods are not included in this type of peer.

Support: Core

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

namespaceSelector

object

NamespaceSelector follows standard label selector semantics; if empty, it selects all Namespaces.

podSelector

object

PodSelector is used to explicitly select pods within a namespace; if empty, it selects all Pods.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

namedPort

string

NamedPort selects a port on a pod(s) based on name.

Support: Extended

<network-policy-api:experimental>

portNumber

object

Port selects a port on a pod(s) based on number.

Support: Core

portRange

object

PortRange selects a port range on a pod(s) based on provided start and end values.

Support: Core

port

integer

Number defines a network port value.

Support: Core

protocol

string

Protocol is the network protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.

Support: Core

end

integer

End defines a network port that is the end of a port range, the End value must be greater than Start.

Support: Core

protocol

string

Protocol is the network protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.

Support: Core

start

integer

Start defines a network port that is the start of a port range, the Start value must be less than End.

Support: Core

namespaces

object

Namespaces is used to select pods via namespace selectors.

pods

object

Pods is used to select pods via namespace AND pod selectors.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

namespaceSelector

object

NamespaceSelector follows standard label selector semantics; if empty, it selects all Namespaces.

podSelector

object

PodSelector is used to explicitly select pods within a namespace; if empty, it selects all Pods.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

conditions

array

conditions[]

object

Condition contains details for one aspect of the current state of this API Resource. --- This struct is intended for direct use as an array at the field path .status.conditions. For example,

type FooStatus struct{ // Represents the observations of a foo’s current state. // Known .status.conditions.type are: "Available", "Progressing", and "Degraded" // +patchMergeKey=type // +patchStrategy=merge // +listType=map // +listMapKey=type Conditions []metav1.Condition json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,1,rep,name=conditions"

// other fields }

lastTransitionTime

string

lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.

message

string

message is a human readable message indicating details about the transition. This may be an empty string.

observedGeneration

integer

observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance.

reason

string

reason contains a programmatic identifier indicating the reason for the condition’s last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty.

status

string

status of the condition, one of True, False, Unknown.

type

string

type of condition in CamelCase or in foo.example.com/CamelCase. --- Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be useful (see .node.status.conditions), the ability to deconflict is important. The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt)

200 - OK

Status schema

401 - Unauthorized

Empty

200 - OK

AdminNetworkPolicyList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

AdminNetworkPolicy schema

200 - OK

AdminNetworkPolicy schema

201 - Created

AdminNetworkPolicy schema

202 - Accepted

AdminNetworkPolicy schema

401 - Unauthorized

Empty

name

string

name of the AdminNetworkPolicy

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

200 - OK

AdminNetworkPolicy schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

AdminNetworkPolicy schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

AdminNetworkPolicy schema

200 - OK

AdminNetworkPolicy schema

201 - Created

AdminNetworkPolicy schema

401 - Unauthorized

Empty

name

string

name of the AdminNetworkPolicy

200 - OK

AdminNetworkPolicy schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

AdminNetworkPolicy schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

AdminNetworkPolicy schema

200 - OK

AdminNetworkPolicy schema

201 - Created

AdminNetworkPolicy schema

401 - Unauthorized

Empty