×

Before you deploy an OpenShift Container Platform cluster using the Agent-based Installer, you provide parameters to customize your cluster and the platform that hosts it. When you create the install-config.yaml and agent-config.yaml files, you must provide values for the required parameters, and you can use the optional parameters to customize your cluster further.

Available installation configuration parameters

The following tables specify the required and optional installation configuration parameters that you can set as part of the Agent-based installation process.

These values are specified in the install-config.yaml file.

These settings are used for installation only, and cannot be modified after installation.

Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 1. Required parameters
Parameter Description Values
apiVersion:

The API version for the install-config.yaml content. The current version is v1. The installation program may also support older API versions.

String

baseDomain:

The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the baseDomain and metadata.name parameter values that uses the <metadata.name>.<baseDomain> format.

A fully-qualified domain or subdomain name, such as example.com.

metadata:

Kubernetes resource ObjectMeta, from which only the name parameter is consumed.

Object

metadata:
  name:

The name of the cluster. DNS records for the cluster are all subdomains of {{.metadata.name}}.{{.baseDomain}}. When you do not provide metadata.name through either the install-config.yaml or agent-config.yaml files, for example when you use only ZTP manifests, the cluster name is set to agent-cluster.

String of lowercase letters, hyphens (-), and periods (.), such as dev.

platform:

The configuration for the specific platform upon which to perform the installation: baremetal, external, none, or vsphere.

Object

pullSecret:

Get a pull secret from Red Hat OpenShift Cluster Manager to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.

{
   "auths":{
      "cloud.openshift.com":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      }
   }
}

Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Consider the following information before you configure network parameters for your cluster:

  • If you use the Red Hat OpenShift Networking OVN-Kubernetes network plugin, both IPv4 and IPv6 address families are supported.

  • If you deployed nodes in an OpenShift Container Platform cluster with a network that supports both IPv4 and non-link-local IPv6 addresses, configure your cluster to use a dual-stack network.

    • For clusters configured for dual-stack networking, both IPv4 and IPv6 traffic must use the same network interface as the default gateway. This ensures that in a multiple network interface controller (NIC) environment, a cluster can detect what NIC to use based on the available network interface. For more information, see "OVN-Kubernetes IPv6 and dual-stack limitations" in About the OVN-Kubernetes network plugin.

    • To prevent network connectivity issues, do not install a single-stack IPv4 cluster on a host that supports dual-stack networking.

If you configure your cluster to use both IP address families, review the following requirements:

  • Both IP families must use the same network interface for the default gateway.

  • Both IP families must have the default gateway.

  • You must specify IPv4 and IPv6 addresses in the same order for all network configuration parameters. For example, in the following configuration IPv4 addresses are listed before IPv6 addresses.

networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  - cidr: fd00:10:128::/56
    hostPrefix: 64
  serviceNetwork:
  - 172.30.0.0/16
  - fd00:172:16::/112

Globalnet is not supported with Red Hat OpenShift Data Foundation disaster recovery solutions. For regional disaster recovery scenarios, ensure that you use a nonoverlapping range of private IP addresses for the cluster and service networks in each cluster.

Table 2. Network parameters
Parameter Description Values
networking:

The configuration for the cluster network.

Object

You cannot modify parameters specified by the networking object after installation.

networking:
  networkType:

The Red Hat OpenShift Networking network plugin to install.

OVNKubernetes. OVNKubernetes is a CNI plugin for Linux networks and hybrid networks that contain both Linux and Windows servers. The default value is OVNKubernetes.

networking:
  clusterNetwork:

The IP address blocks for pods.

The default value is 10.128.0.0/14 with a host prefix of /23.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  - cidr: fd01::/48
    hostPrefix: 64
networking:
  clusterNetwork:
    cidr:

Required if you use networking.clusterNetwork. An IP address block.

If you use the OVN-Kubernetes network plugin, you can specify IPv4 and IPv6 networks.

An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between 0 and 32. The prefix length for an IPv6 block is between 0 and 128. For example, 10.128.0.0/14 or fd01::/48.

networking:
  clusterNetwork:
    hostPrefix:

The subnet prefix length to assign to each individual node. For example, if hostPrefix is set to 23 then each node is assigned a /23 subnet out of the given cidr. A hostPrefix value of 23 provides 510 (2^(32 - 23) - 2) pod IP addresses.

A subnet prefix.

For an IPv4 network the default value is 23. For an IPv6 network the default value is 64. The default value is also the minimum value for IPv6.

networking:
  serviceNetwork:

The IP address block for services. The default value is 172.30.0.0/16.

The OVN-Kubernetes network plugins supports only a single IP address block for the service network.

If you use the OVN-Kubernetes network plugin, you can specify an IP address block for both of the IPv4 and IPv6 address families.

An array with an IP address block in CIDR format. For example:

networking:
  serviceNetwork:
   - 172.30.0.0/16
   - fd02::/112
networking:
  machineNetwork:

The IP address blocks for machines.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  machineNetwork:
  - cidr: 10.0.0.0/16
networking:
  machineNetwork:
    cidr:

Required if you use networking.machineNetwork. An IP address block. The default value is 10.0.0.0/16 for all platforms other than libvirt and IBM Power® Virtual Server. For libvirt, the default value is 192.168.126.0/24. For IBM Power® Virtual Server, the default value is 192.168.0.0/24.

An IP network block in CIDR notation.

For example, 10.0.0.0/16 or fd00::/48.

Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.

Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 3. Optional parameters
Parameter Description Values
additionalTrustBundle:

A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.

String

capabilities:

Controls the installation of optional core cluster components. You can reduce the footprint of your OpenShift Container Platform cluster by disabling optional components. For more information, see the "Cluster capabilities" page in Installing.

String array

capabilities:
  baselineCapabilitySet:

Selects an initial set of optional capabilities to enable. Valid values are None, v4.11, v4.12 and vCurrent. The default value is vCurrent.

String

capabilities:
  additionalEnabledCapabilities:

Extends the set of optional capabilities beyond what you specify in baselineCapabilitySet. You may specify multiple capabilities in this parameter.

String array

cpuPartitioningMode:

Enables workload partitioning, which isolates OpenShift Container Platform services, cluster management workloads, and infrastructure pods to run on a reserved set of CPUs. Workload partitioning can only be enabled during installation and cannot be disabled after installation. While this field enables workload partitioning, it does not configure workloads to use specific CPUs. For more information, see the Workload partitioning page in the Scalability and Performance section.

None or AllNodes. None is the default value.

compute:

The configuration for the machines that comprise the compute nodes.

Array of MachinePool objects.

compute:
  architecture:

Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are amd64, arm64, ppc64le, and s390x.

String

compute:
  hyperthreading:

Whether to enable or disable simultaneous multithreading, or hyperthreading, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

compute:
  name:

Required if you use compute. The name of the machine pool.

worker

compute:
  platform:

Required if you use compute. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the controlPlane.platform parameter value.

baremetal, vsphere, or {}

compute:
  replicas:

The number of compute machines, which are also known as worker machines, to provision.

A positive integer greater than or equal to 2. The default value is 3.

featureSet:

Enables the cluster for a feature set. A feature set is a collection of OpenShift Container Platform features that are not enabled by default. For more information about enabling a feature set during installation, see "Enabling features using feature gates".

String. The name of the feature set to enable, such as TechPreviewNoUpgrade.

controlPlane:

The configuration for the machines that comprise the control plane.

Array of MachinePool objects.

controlPlane:
  architecture:

Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are amd64, arm64, ppc64le, and s390x.

String

controlPlane:
  hyperthreading:

Whether to enable or disable simultaneous multithreading, or hyperthreading, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

controlPlane:
  name:

Required if you use controlPlane. The name of the machine pool.

master

controlPlane:
  platform:

Required if you use controlPlane. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the compute.platform parameter value.

baremetal, vsphere, or {}

controlPlane:
  replicas:

The number of control plane machines to provision.

Supported values are 3, or 1 when deploying single-node OpenShift.

credentialsMode:

The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported.

Not all CCO modes are supported for all cloud providers. For more information about CCO modes, see the "Managing cloud provider credentials" entry in the Authentication and authorization content.

Mint, Passthrough, Manual or an empty string ("").

fips:

Enable or disable FIPS mode. The default is false (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.

To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Switching RHEL to FIPS mode.

When running Red Hat Enterprise Linux (RHEL) or Red Hat Enterprise Linux CoreOS (RHCOS) booted in FIPS mode, OpenShift Container Platform core components use the RHEL cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.

If you are using Azure File storage, you cannot enable FIPS mode.

false or true

imageContentSources:

Sources and repositories for the release-image content.

Array of objects. Includes a source and, optionally, mirrors, as described in the following rows of this table.

imageContentSources:
  source:

Required if you use imageContentSources. Specify the repository that users refer to, for example, in image pull specifications.

String

imageContentSources:
  mirrors:

Specify one or more repositories that may also contain the same images.

Array of strings

publish:

How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.

Internal or External. The default value is External.

Setting this field to Internal is not supported on non-cloud platforms.

If the value of the field is set to Internal, the cluster will become non-functional. For more information, refer to BZ#1953035.

sshKey:

The SSH key to authenticate access to your cluster machines.

For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

For example, sshKey: ssh-ed25519 AAAA...

Additional bare metal configuration parameters for the Agent-based Installer

Additional bare metal installation configuration parameters for the Agent-based Installer are described in the following table:

These fields are not used during the initial provisioning of the cluster, but they are available to use once the cluster has been installed. Configuring these fields at install time eliminates the need to set them as a Day 2 operation.

Table 4. Additional bare metal parameters
Parameter Description Values
platform:
  baremetal:
    clusterProvisioningIP:

The IP address within the cluster where the provisioning services run. Defaults to the third IP address of the provisioning subnet. For example, 172.22.0.3 or 2620:52:0:1307::3.

IPv4 or IPv6 address.

platform:
  baremetal:
    provisioningNetwork:

The provisioningNetwork configuration setting determines whether the cluster uses the provisioning network. If it does, the configuration setting also determines if the cluster manages the network.

Managed: Default. Set this parameter to Managed to fully manage the provisioning network, including DHCP, TFTP, and so on.

Disabled: Set this parameter to Disabled to disable the requirement for a provisioning network. When set to Disabled, you can use only virtual media based provisioning on Day 2. If Disabled and using power management, BMCs must be accessible from the bare-metal network. If Disabled, you must provide two IP addresses on the bare-metal network that are used for the provisioning services.

Managed or Disabled.

platform:
  baremetal:
    provisioningMACAddress:

The MAC address within the cluster where provisioning services run.

MAC address.

platform:
  baremetal:
    provisioningNetworkCIDR:

The CIDR for the network to use for provisioning. This option is required when not using the default address range on the provisioning network.

Valid CIDR, for example 10.0.0.0/16.

platform:
  baremetal:
    provisioningNetworkInterface:

The name of the network interface on nodes connected to the provisioning network. Use the bootMACAddress configuration setting to enable Ironic to identify the IP address of the NIC instead of using the provisioningNetworkInterface configuration setting to identify the name of the NIC.

String.

platform:
  baremetal:
    provisioningDHCPRange:

Defines the IP range for nodes on the provisioning network, for example 172.22.0.10,172.22.0.254.

IP address range.

platform:
  baremetal:
    hosts:

Configuration for bare metal hosts.

Array of host configuration objects.

platform:
  baremetal:
    hosts:
      name:

The name of the host.

String.

platform:
  baremetal:
    hosts:
      bootMACAddress:

The MAC address of the NIC used for provisioning the host.

MAC address.

platform:
  baremetal:
    hosts:
      bmc:

Configuration for the host to connect to the baseboard management controller (BMC).

Dictionary of BMC configuration objects.

platform:
  baremetal:
    hosts:
      bmc:
        username:

The username for the BMC.

String.

platform:
  baremetal:
    hosts:
      bmc:
        password:

Password for the BMC.

String.

platform:
  baremetal:
    hosts:
      bmc:
        address:

The URL for communicating with the host’s BMC controller. The address configuration setting specifies the protocol. For example, redfish+http://10.10.10.1:8000/redfish/v1/Systems/1234 enables Redfish. For more information, see "BMC addressing" in the "Deploying installer-provisioned clusters on bare metal" section.

URL.

platform:
  baremetal:
    hosts:
      bmc:
        disableCertificateVerification:

redfish and redfish-virtualmedia need this parameter to manage BMC addresses. The value should be True when using a self-signed certificate for BMC addresses.

Boolean.

Additional VMware vSphere configuration parameters

Additional VMware vSphere configuration parameters are described in the following table:

Table 5. Additional VMware vSphere cluster parameters
Parameter Description Values
platform:
  vsphere:

Describes your account on the cloud platform that hosts your cluster. You can use the parameter to customize the platform. If you provide additional configuration settings for compute and control plane machines in the machine pool, the parameter is not required. You can only specify one vCenter server for your OpenShift Container Platform cluster.

A dictionary of vSphere configuration objects

platform:
  vsphere:
    failureDomains:

Establishes the relationships between a region and zone. You define a failure domain by using vCenter objects, such as a datastore object. A failure domain defines the vCenter location for OpenShift Container Platform cluster nodes.

An array of failure domain configuration objects.

platform:
  vsphere:
    failureDomains:
      name:

The name of the failure domain.

String

platform:
  vsphere:
    failureDomains:
      region:

If you define multiple failure domains for your cluster, you must attach the tag to each vCenter data center. To define a region, use a tag from the openshift-region tag category. For a single vSphere data center environment, you do not need to attach a tag, but you must enter an alphanumeric value, such as datacenter, for the parameter.

String

platform:
  vsphere:
    failureDomains:
      server:

Specifies the fully-qualified hostname or IP address of the VMware vCenter server, so that a client can access failure domain resources. You must apply the server role to the vSphere vCenter server location.

String

platform:
  vsphere:
    failureDomains:
      zone:

If you define multiple failure domains for your cluster, you must attach a tag to each vCenter cluster. To define a zone, use a tag from the openshift-zone tag category. For a single vSphere data center environment, you do not need to attach a tag, but you must enter an alphanumeric value, such as cluster, for the parameter.

String

platform:
  vsphere:
    failureDomains:
      topology:
        computeCluster:

The path to the vSphere compute cluster.

String

platform:
  vsphere:
    failureDomains:
      topology:
        datacenter:

Lists and defines the data centers where OpenShift Container Platform virtual machines (VMs) operate. The list of data centers must match the list of data centers specified in the vcenters field.

String

platform:
  vsphere:
    failureDomains:
      topology:
        datastore:

The path to the vSphere datastore that holds virtual machine files, templates, and ISO images.

You can specify the path of any datastore that exists in a datastore cluster. By default, Storage vMotion is automatically enabled for a datastore cluster. Red Hat does not support Storage vMotion, so you must disable Storage vMotion to avoid data loss issues for your OpenShift Container Platform cluster.

If you must specify VMs across multiple datastores, use a datastore object to specify a failure domain in your cluster’s install-config.yaml configuration file. For more information, see "VMware vSphere region and zone enablement".

String

platform:
  vsphere:
    failureDomains:
      topology:
        folder:

Optional: The absolute path of an existing folder where the user creates the virtual machines, for example, /<data_center_name>/vm/<folder_name>/<subfolder_name>.

String

platform:
  vsphere:
    failureDomains:
      topology:
        networks:

Lists any network in the vCenter instance that contains the virtual IP addresses and DNS records that you configured.

String

platform:
  vsphere:
    failureDomains:
      topology:
        resourcePool:

Optional: The absolute path of an existing resource pool where the installation program creates the virtual machines, for example, /<data_center_name>/host/<cluster_name>/Resources/<resource_pool_name>/<optional_nested_resource_pool_name>.

String

platform:
  vsphere:
    failureDomains:
      topology
        template:

Specifies the absolute path to a pre-existing Red Hat Enterprise Linux CoreOS (RHCOS) image template or virtual machine. The installation program can use the image template or virtual machine to quickly install RHCOS on vSphere hosts. Consider using this parameter as an alternative to uploading an RHCOS image on vSphere hosts. This parameter is available for use only on installer-provisioned infrastructure.

String

platform:
  vsphere:
    vcenters:

Configures the connection details so that services can communicate with a vCenter server. Currently, only a single vCenter server is supported.

An array of vCenter configuration objects.

platform:
  vsphere:
    vcenters:
      datacenters:

Lists and defines the data centers where OpenShift Container Platform virtual machines (VMs) operate. The list of data centers must match the list of data centers specified in the failureDomains field.

String

platform:
  vsphere:
    vcenters:
      password:

The password associated with the vSphere user.

String

platform:
  vsphere:
    vcenters:
      port:

The port number used to communicate with the vCenter server.

Integer

platform:
  vsphere:
    vcenters:
      server:

The fully qualified host name (FQHN) or IP address of the vCenter server.

String

platform:
  vsphere:
    vcenters:
      user:

The username associated with the vSphere user.

String

Deprecated VMware vSphere configuration parameters

In OpenShift Container Platform 4.13, the following vSphere configuration parameters are deprecated. You can continue to use these parameters, but the installation program does not automatically specify these parameters in the install-config.yaml file.

The following table lists each deprecated vSphere configuration parameter:

Table 6. Deprecated VMware vSphere cluster parameters
Parameter Description Values
platform:
  vsphere:
    cluster:

The vCenter cluster to install the OpenShift Container Platform cluster in.

String

platform:
  vsphere:
    datacenter:

Defines the data center where OpenShift Container Platform virtual machines (VMs) operate.

String

platform:
  vsphere:
    defaultDatastore:

The name of the default datastore to use for provisioning volumes.

String

platform:
  vsphere:
    folder:

Optional: The absolute path of an existing folder where the installation program creates the virtual machines. If you do not provide this value, the installation program creates a folder that is named with the infrastructure ID in the data center virtual machine folder.

String, for example, /<data_center_name>/vm/<folder_name>/<subfolder_name>.

platform:
  vsphere:
    password:

The password for the vCenter user name.

String

platform:
  vsphere:
    resourcePool:

Optional: The absolute path of an existing resource pool where the installation program creates the virtual machines. If you do not specify a value, the installation program installs the resources in the root of the cluster under /<data_center_name>/host/<cluster_name>/Resources.

String, for example, /<data_center_name>/host/<cluster_name>/Resources/<resource_pool_name>/<optional_nested_resource_pool_name>.

platform:
  vsphere:
    username:

The user name to use to connect to the vCenter instance with. This user must have at least the roles and privileges that are required for static or dynamic persistent volume provisioning in vSphere.

String

platform:
  vsphere:
    vCenter:

The fully-qualified hostname or IP address of a vCenter server.

String

Available Agent configuration parameters

The following tables specify the required and optional Agent configuration parameters that you can set as part of the Agent-based installation process.

These values are specified in the agent-config.yaml file.

These settings are used for installation only, and cannot be modified after installation.

Required configuration parameters

Required Agent configuration parameters are described in the following table:

Table 7. Required parameters
Parameter Description Values
apiVersion:

The API version for the agent-config.yaml content. The current version is v1beta1. The installation program might also support older API versions.

String

metadata:

Kubernetes resource ObjectMeta, from which only the name parameter is consumed.

Object

metadata:
  name:

The name of the cluster. DNS records for the cluster are all subdomains of {{.metadata.name}}.{{.baseDomain}}. The value entered in the agent-config.yaml file is ignored, and instead the value specified in the install-config.yaml file is used. When you do not provide metadata.name through either the install-config.yaml or agent-config.yaml files, for example when you use only ZTP manifests, the cluster name is set to agent-cluster.

String of lowercase letters and hyphens (-), such as dev.

Optional configuration parameters

Optional Agent configuration parameters are described in the following table:

Table 8. Optional parameters
Parameter Description Values
rendezvousIP:

The IP address of the node that performs the bootstrapping process as well as running the assisted-service component. You must provide the rendezvous IP address when you do not specify at least one host’s IP address in the networkConfig parameter. If this address is not provided, one IP address is selected from the provided hosts' networkConfig.

IPv4 or IPv6 address.

bootArtifactsBaseURL:

The URL of the server to upload Preboot Execution Environment (PXE) assets to when using the Agent-based Installer to generate an iPXE script. For more information, see "Preparing PXE assets for OpenShift Container Platform".

String.

additionalNTPSources:

A list of Network Time Protocol (NTP) sources to be added to all cluster hosts, which are added to any NTP sources that are configured through other means.

List of hostnames or IP addresses.

hosts:

Host configuration. An optional list of hosts. The number of hosts defined must not exceed the total number of hosts defined in the install-config.yaml file, which is the sum of the values of the compute.replicas and controlPlane.replicas parameters.

An array of host configuration objects.

hosts:
  hostname:

Hostname. Overrides the hostname obtained from either the Dynamic Host Configuration Protocol (DHCP) or a reverse DNS lookup. Each host must have a unique hostname supplied by one of these methods, although configuring a hostname through this parameter is optional.

String.

hosts:
  interfaces:

Provides a table of the name and MAC address mappings for the interfaces on the host. If a NetworkConfig section is provided in the agent-config.yaml file, this table must be included and the values must match the mappings provided in the NetworkConfig section.

An array of host configuration objects.

hosts:
  interfaces:
    name:

The name of an interface on the host.

String.

hosts:
  interfaces:
    macAddress:

The MAC address of an interface on the host.

A MAC address such as the following example: 00-B0-D0-63-C2-26.

hosts:
  role:

Defines whether the host is a master or worker node. If no role is defined in the agent-config.yaml file, roles will be assigned at random during cluster installation.

master or worker.

hosts:
  rootDeviceHints:

Enables provisioning of the Red Hat Enterprise Linux CoreOS (RHCOS) image to a particular device. The installation program examines the devices in the order it discovers them, and compares the discovered values with the hint values. It uses the first discovered device that matches the hint value. This is the device that the operating system is written on during installation.

A dictionary of key-value pairs. For more information, see "Root device hints" in the "Setting up the environment for an OpenShift installation" page.

hosts:
  rootDeviceHints:
    deviceName:

The name of the device the RHCOS image is provisioned to.

String.

hosts:
  networkConfig:

The host network definition. The configuration must match the Host Network Management API defined in the nmstate documentation.

A dictionary of host network configuration objects.