Soon, all Red Hat OpenShift documentation will only be available on docs.redhat.com, the official location of all Red Hat product documentation. Get familiar with the updated experience today!
  1. Documentation
    2. history bug_report picture_as_pdf
×

Installer-provisioned postinstallation configuration

After successfully deploying an installer-provisioned cluster, consider the following postinstallation procedures.

Optional: Configuring NTP for disconnected clusters

OpenShift Container Platform installs the chrony Network Time Protocol (NTP) service on the cluster nodes. Use the following procedure to configure NTP servers on the control plane nodes and configure compute nodes as NTP clients of the control plane nodes after a successful deployment.

Configuring NTP for disconnected clusters

OpenShift Container Platform nodes must agree on a date and time to run properly. When compute nodes retrieve the date and time from the NTP servers on the control plane nodes, it enables the installation and operation of clusters that are not connected to a routable network and thereby do not have access to a higher stratum NTP server.

Procedure

  1. Install Butane on your installation host by using the following command:

    $ sudo dnf -y install butane

  2. Create a Butane config, 99-master-chrony-conf-override.bu, including the contents of the chrony.conf file for the control plane nodes.

    See "Creating machine configs with Butane" for information about Butane.
    Butane config example
    variant: openshift
version: 4.16.0
metadata:
  name: 99-master-chrony-conf-override
  labels:
    machineconfiguration.openshift.io/role: master
storage:
  files:
    - path: /etc/chrony.conf
      mode: 0644
      overwrite: true
      contents:
        inline: |
          # Use public servers from the pool.ntp.org project.
          # Please consider joining the pool (https://www.pool.ntp.org/join.html).

          # The Machine Config Operator manages this file
          server openshift-master-0.<cluster-name>.<domain> iburst (1)
          server openshift-master-1.<cluster-name>.<domain> iburst
          server openshift-master-2.<cluster-name>.<domain> iburst

          stratumweight 0
          driftfile /var/lib/chrony/drift
          rtcsync
          makestep 10 3
          bindcmdaddress 127.0.0.1
          bindcmdaddress ::1
          keyfile /etc/chrony.keys
          commandkey 1
          generatecommandkey
          noclientlog
          logchange 0.5
          logdir /var/log/chrony

          # Configure the control plane nodes to serve as local NTP servers
          # for all compute nodes, even if they are not in sync with an
          # upstream NTP server.

          # Allow NTP client access from the local network.
          allow all
          # Serve time even if not synchronized to a time source.
          local stratum 3 orphan
    1 You must replace <cluster-name> with the name of the cluster and replace <domain> with the fully qualified domain name.

  3. Use Butane to generate a MachineConfig object file, 99-master-chrony-conf-override.yaml, containing the configuration to be delivered to the control plane nodes:

    $ butane 99-master-chrony-conf-override.bu -o 99-master-chrony-conf-override.yaml

  4. Create a Butane config, 99-worker-chrony-conf-override.bu, including the contents of the chrony.conf file for the compute nodes that references the NTP servers on the control plane nodes.

    Butane config example
    variant: openshift
version: 4.16.0
metadata:
  name: 99-worker-chrony-conf-override
  labels:
    machineconfiguration.openshift.io/role: worker
storage:
  files:
    - path: /etc/chrony.conf
      mode: 0644
      overwrite: true
      contents:
        inline: |
          # The Machine Config Operator manages this file.
          server openshift-master-0.<cluster-name>.<domain> iburst (1)
          server openshift-master-1.<cluster-name>.<domain> iburst
          server openshift-master-2.<cluster-name>.<domain> iburst

          stratumweight 0
          driftfile /var/lib/chrony/drift
          rtcsync
          makestep 10 3
          bindcmdaddress 127.0.0.1
          bindcmdaddress ::1
          keyfile /etc/chrony.keys
          commandkey 1
          generatecommandkey
          noclientlog
          logchange 0.5
          logdir /var/log/chrony
    1 You must replace <cluster-name> with the name of the cluster and replace <domain> with the fully qualified domain name.

  5. Use Butane to generate a MachineConfig object file, 99-worker-chrony-conf-override.yaml, containing the configuration to be delivered to the worker nodes:

    $ butane 99-worker-chrony-conf-override.bu -o 99-worker-chrony-conf-override.yaml

  6. Apply the 99-master-chrony-conf-override.yaml policy to the control plane nodes.

    $ oc apply -f 99-master-chrony-conf-override.yaml
    Example output
    machineconfig.machineconfiguration.openshift.io/99-master-chrony-conf-override created

  7. Apply the 99-worker-chrony-conf-override.yaml policy to the compute nodes.

    $ oc apply -f 99-worker-chrony-conf-override.yaml
    Example output
    machineconfig.machineconfiguration.openshift.io/99-worker-chrony-conf-override created

  8. Check the status of the applied NTP settings.

    $ oc describe machineconfigpool

Enabling a provisioning network after installation

The assisted installer and installer-provisioned installation for bare metal clusters provide the ability to deploy a cluster without a provisioning network. This capability is for scenarios such as proof-of-concept clusters or deploying exclusively with Redfish virtual media when each node’s baseboard management controller is routable via the baremetal network.

You can enable a provisioning network after installation using the Cluster Baremetal Operator (CBO).

Prerequisites

  • A dedicated physical network must exist, connected to all worker and control plane nodes.

  • You must isolate the native, untagged physical network.

  • The network cannot have a DHCP server when the provisioningNetwork configuration setting is set to Managed.

  • You can omit the provisioningInterface setting in OpenShift Container Platform 4.10 to use the bootMACAddress configuration setting.

Procedure

  1. When setting the provisioningInterface setting, first identify the provisioning interface name for the cluster nodes. For example, eth0 or eno1.

  2. Enable the Preboot eXecution Environment (PXE) on the provisioning network interface of the cluster nodes.

  3. Retrieve the current state of the provisioning network and save it to a provisioning custom resource (CR) file:

    $ oc get provisioning -o yaml > enable-provisioning-nw.yaml

  4. Modify the provisioning CR file:

    $ vim ~/enable-provisioning-nw.yaml

    Scroll down to the provisioningNetwork configuration setting and change it from Disabled to Managed. Then, add the provisioningIP, provisioningNetworkCIDR, provisioningDHCPRange, provisioningInterface, and watchAllNameSpaces configuration settings after the provisioningNetwork setting. Provide appropriate values for each setting.

    apiVersion: v1
items:
- apiVersion: metal3.io/v1alpha1
  kind: Provisioning
  metadata:
    name: provisioning-configuration
  spec:
    provisioningNetwork: (1)
    provisioningIP: (2)
    provisioningNetworkCIDR: (3)
    provisioningDHCPRange: (4)
    provisioningInterface: (5)
    watchAllNameSpaces: (6)
    1 The provisioningNetwork is one of Managed, Unmanaged, or Disabled. When set to Managed, Metal3 manages the provisioning network and the CBO deploys the Metal3 pod with a configured DHCP server. When set to Unmanaged, the system administrator configures the DHCP server manually.
    2 The provisioningIP is the static IP address that the DHCP server and ironic use to provision the network. This static IP address must be within the provisioning subnet, and outside of the DHCP range. If you configure this setting, it must have a valid IP address even if the provisioning network is Disabled. The static IP address is bound to the metal3 pod. If the metal3 pod fails and moves to another server, the static IP address also moves to the new server.
    3 The Classless Inter-Domain Routing (CIDR) address. If you configure this setting, it must have a valid CIDR address even if the provisioning network is Disabled. For example: 192.168.0.1/24.
    4 The DHCP range. This setting is only applicable to a Managed provisioning network. Omit this configuration setting if the provisioning network is Disabled. For example: 192.168.0.64, 192.168.0.253.
    5 The NIC name for the provisioning interface on cluster nodes. The provisioningInterface setting is only applicable to Managed and Unmanaged provisioning networks. Omit the provisioningInterface configuration setting if the provisioning network is Disabled. Omit the provisioningInterface configuration setting to use the bootMACAddress configuration setting instead.
    6 Set this setting to true if you want metal3 to watch namespaces other than the default openshift-machine-api namespace. The default value is false.

  5. Save the changes to the provisioning CR file.

  6. Apply the provisioning CR file to the cluster:

    $ oc apply -f enable-provisioning-nw.yaml

Optional: Creating a manifest object that includes a customized br-ex bridge

As an alternative to using the configure-ovs.sh shell script to set a customized br-ex bridge on a bare-metal platform, you can create a NodeNetworkConfigurationPolicy custom resource (CR) that includes a customized br-ex bridge network configuration.

Creating a NodeNetworkConfigurationPolicy CR that includes a customized br-ex bridge is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

This feature supports the following tasks:

  • Modifying the maximum transmission unit (MTU) for your cluster.

  • Modifying attributes of a different bond interface, such as MIImon (Media Independent Interface Monitor), bonding mode, or Quality of Service (QoS).

  • Updating DNS values.

Consider the following use cases for creating a manifest object that includes a customized br-ex bridge:

  • You want to make postinstallation changes to the bridge, such as changing the Open vSwitch (OVS) or OVN-Kubernetes br-ex bridge network. The configure-ovs.sh shell script does not support making postinstallation changes to the bridge.

  • You want to deploy the bridge on a different interface than the interface available on a host or server IP address.

  • You want to make advanced configurations to the bridge that are not possible with the configure-ovs.sh shell script. Using the script for these configurations might result in the bridge failing to connect multiple network interfaces and facilitating data forwarding between the interfaces.

Prerequisites

  • You set a customized br-ex by using the alternative method to configure-ovs.

  • You installed the Kubernetes NMState Operator.

Procedure

  • Create a NodeNetworkConfigurationPolicy (NNCP) CR and define a customized br-ex bridge network configuration. Depending on your needs, ensure that you set a masquerade IP for either the ipv4.address.ip, ipv6.address.ip, or both parameters. A masquerade IP address must match an in-use IP address block.

    As a post-installation task, you can configure most parameters for a customized br-ex bridge that you defined in an existing NNCP CR, except for the IP address.
    Example of an NNCP CR that sets IPv6 and IPv4 masquerade IP addresses
    apiVersion: nmstate.io/v1
kind: NodeNetworkConfigurationPolicy
metadata:
  name: worker-0-br-ex (1)
spec:
  nodeSelector:
    kubernetes.io/hostname: worker-0
    desiredState:
    interfaces:
    - name: enp2s0 (2)
      type: ethernet (3)
      state: up (4)
      ipv4:
        enabled: false (5)
      ipv6:
        enabled: false
    - name: br-ex
      type: ovs-bridge
      state: up
      ipv4:
        enabled: false
        dhcp: false
      ipv6:
        enabled: false
        dhcp: false
      bridge:
        port:
        - name: enp2s0 (6)
        - name: br-ex
    - name: br-ex
      type: ovs-interface
      state: up
      copy-mac-from: enp2s0
      ipv4:
        enabled: true
        dhcp: true
        address:
        - ip: "169.254.169.2"
          prefix-length: 29
      ipv6:
        enabled: false
        dhcp: false
        address:
        - ip: "fd69::2"
        prefix-length: 125
    1 Name of the policy.
    2 Name of the interface.
    3 The type of ethernet.
    4 The requested state for the interface after creation.
    5 Disables IPv4 and IPv6 in this example.
    6 The node NIC to which the bridge is attached.