Installing a cluster with customizations - Installing on AWS | Installing

Prerequisites
Obtaining an AWS Marketplace image
Creating the installation configuration file
Alternatives to storing administrator-level secrets in the kube-system project
- Manually creating long-term credentials
- Configuring an AWS cluster to use short-term credentials
Deploying the cluster
Logging in to the cluster by using the CLI
Logging in to the cluster by using the web console
Next steps

In OpenShift Container Platform version 4.16, you can install a customized cluster on infrastructure that the installation program provisions on Amazon Web Services (AWS). To customize the installation, you modify parameters in the install-config.yaml file before you install the cluster.

The scope of the OpenShift Container Platform installation configurations is intentionally narrow. It is designed for simplicity and ensured success. You can complete many more OpenShift Container Platform configuration tasks after an installation completes.

Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.

You configured an AWS account to host the cluster.

If you have an AWS profile stored on your computer, it must not use a temporary session token that you generated while using a multi-factor authentication device. The cluster continues to use your current AWS credentials to create AWS resources for the entire life of the cluster, so you must use long-term credentials. To generate appropriate keys, see Managing Access Keys for IAM Users in the AWS documentation. You can supply the keys when you run the installation program.

If you use a firewall, you configured it to allow the sites that your cluster requires access to.

Obtaining an AWS Marketplace image

If you are deploying an OpenShift Container Platform cluster using an AWS Marketplace image, you must first subscribe through AWS. Subscribing to the offer provides you with the AMI ID that the installation program uses to deploy compute nodes.

Prerequisites

You have an AWS account to purchase the offer. This account does not have to be the same account that is used to install the cluster.

Procedure

Complete the OpenShift Container Platform subscription from the AWS Marketplace.

Record the AMI ID for your specific AWS Region. As part of the installation process, you must update the install-config.yaml file with this value before deploying the cluster.

Sample install-config.yaml file with AWS Marketplace compute nodes

apiVersion: v1
baseDomain: example.com
compute:
- hyperthreading: Enabled
  name: worker
  platform:
    aws:
      amiID: ami-06c4d345f7c207239 (1)
      type: m5.4xlarge
  replicas: 3
metadata:
  name: test-cluster
platform:
  aws:
    region: us-east-2 (2)
sshKey: ssh-ed25519 AAAA...
pullSecret: '{"auths": ...}'

1	The AMI ID from your AWS Marketplace subscription.
2	Your AMI ID is associated with a specific AWS Region. When creating the installation configuration file, ensure that you select the same AWS Region that you specified when configuring your subscription.

Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Amazon Web Services (AWS).

Prerequisites

You have the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Create the install-config.yaml file.
1. Change to the directory that contains the installation program and run the following command:
  $ ./openshift-install create install-config --dir <installation_directory> (1)
  1 For <installation_directory>, specify the directory name to store the files that the installation program creates.
  
  When specifying the directory:
  - Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.
  - Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
2. At the prompts, provide the configuration details for your cloud:
  1. Optional: Select an SSH key to use to access your cluster machines.
    
    For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
  2. Select AWS as the platform to target.
  3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.
  4. Select the AWS region to deploy the cluster to.
  5. Select the base domain for the Route 53 service that you configured for your cluster.
  6. Enter a descriptive name for your cluster.

Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.

If you are installing a three-node cluster, be sure to set the compute.replicas parameter to 0. This ensures that the cluster’s control planes are schedulable. For more information, see "Installing a three-node cluster on AWS".

Back up the install-config.yaml file so that you can use it to install multiple clusters.

The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Additional resources

Installation configuration parameters for AWS

Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 1. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	Input/Output Per Second (IOPS)^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

As of OpenShift Container Platform version 4.13, RHCOS is based on RHEL version 9.2, which updates the micro-architecture requirements. The following list contains the minimum instruction set architectures (ISA) that each architecture requires:

x86-64 architecture requires x86-64-v2 ISA
ARM64 architecture requires ARMv8.0-A ISA
IBM Power architecture requires Power 9 ISA
s390x architecture requires z14 ISA

For more information, see RHEL Architectures.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

Tested instance types for AWS

The following Amazon Web Services (AWS) instance types have been tested with OpenShift Container Platform.

Use the machine types included in the following charts for your AWS instances. If you use an instance type that is not listed in the chart, ensure that the instance size you use matches the minimum resource requirements that are listed in the section named "Minimum resource requirements for cluster installation".

Machine types based on 64-bit x86 architecture

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

Tested instance types for AWS on 64-bit ARM infrastructures

The following Amazon Web Services (AWS) 64-bit ARM instance types have been tested with OpenShift Container Platform.

Use the machine types included in the following charts for your AWS ARM instances. If you use an instance type that is not listed in the chart, ensure that the instance size you use matches the minimum resource requirements that are listed in "Minimum resource requirements for cluster installation".

Machine types based on 64-bit ARM architecture

c6g.*
m6g.*

Sample customized install-config.yaml file for AWS

You can customize the installation configuration file (install-config.yaml) to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com (1)
credentialsMode: Mint (2)
controlPlane:  (3) (4)
  hyperthreading: Enabled (5)
  name: master
  platform:
    aws:
      zones:
      - us-west-2a
      - us-west-2b
      rootVolume:
        iops: 4000
        size: 500
        type: io1 (6)
      metadataService:
        authentication: Optional (7)
      type: m6i.xlarge
  replicas: 3
compute: (3)
- hyperthreading: Enabled (5)
  name: worker
  platform:
    aws:
      rootVolume:
        iops: 2000
        size: 500
        type: io1 (6)
      metadataService:
        authentication: Optional (7)
      type: c5.4xlarge
      zones:
      - us-west-2c
  replicas: 3
metadata:
  name: test-cluster (1)
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OVNKubernetes (8)
  serviceNetwork:
  - 172.30.0.0/16
platform:
  aws:
    region: us-west-2 (1)
    propagateUserTags: true (3)
    userTags:
      adminContact: jdoe
      costCenter: 7536
    amiID: ami-0c5d3e03c0ab9b19a (9)
    serviceEndpoints: (10)
      - name: ec2
        url: https://vpce-id.ec2.us-west-2.vpce.amazonaws.com
fips: false (11)
sshKey: ssh-ed25519 AAAA... (12)
pullSecret: '{"auths": ...}' (1)

1 Required. The installation program prompts you for this value.

2 Optional: Add this parameter to force the Cloud Credential Operator (CCO) to use the specified mode. By default, the CCO uses the root credentials in the kube-system namespace to dynamically try to determine the capabilities of the credentials. For details about CCO modes, see the "About the Cloud Credential Operator" section in the Authentication and authorization guide.

3 If you do not provide these parameters and values, the installation program provides the default value.

4 The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.

Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger instance types, such as m4.2xlarge or m5.2xlarge, for your machines if you disable simultaneous multithreading.

6 To configure faster storage for etcd, especially for larger clusters, set the storage type as io1 and set iops to 2000.

Whether to require the Amazon EC2 Instance Metadata Service v2 (IMDSv2). To require IMDSv2, set the parameter value to Required. To allow the use of both IMDSv1 and IMDSv2, set the parameter value to Optional. If no value is specified, both IMDSv1 and IMDSv2 are allowed.

The IMDS configuration for control plane machines that is set during cluster installation can only be changed by using the AWS CLI. The IMDS configuration for compute machines can be changed by using compute machine sets.

8 The cluster network plugin to install. The default value OVNKubernetes is the only supported value.

9 The ID of the AMI used to boot machines for the cluster. If set, the AMI must belong to the same region as the cluster.

10 The AWS service endpoints. Custom endpoints are required when installing to an unknown AWS region. The endpoint URL must use the https protocol and the host must trust the certificate.

Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.

To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode.

When running Red Hat Enterprise Linux (RHEL) or Red Hat Enterprise Linux CoreOS (RHCOS) booted in FIPS mode, OpenShift Container Platform core components use the RHEL cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.

You can optionally provide the sshKey value that you use to access the machines in your cluster.

For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OpenShift Container Platform cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

You have an existing install-config.yaml file.

You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.

The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.

For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:

apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> (1)
  httpsProxy: https://<username>:<pswd>@<ip>:<port> (2)
  noProxy: ec2.<aws_region>.amazonaws.com,elasticloadbalancing.<aws_region>.amazonaws.com,s3.<aws_region>.amazonaws.com (3)
additionalTrustBundle: | (4)
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> (5)

1	A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be `http`.
2	A proxy URL to use for creating HTTPS connections outside the cluster.
3	A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with `.` to match subdomains only. For example, `.y.com` matches `x.y.com`, but not `y.com`. Use `*` to bypass the proxy for all destinations. If you have added the Amazon `EC2`,`Elastic Load Balancing`, and `S3` VPC endpoints to your VPC, you must add these endpoints to the `noProxy` field.
4	If provided, the installation program generates a config map that is named `user-ca-bundle` in the `openshift-config` namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a `trusted-ca-bundle` config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the `trustedCA` field of the `Proxy` object. The `additionalTrustBundle` field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
5	Optional: The policy to determine the configuration of the `Proxy` object to reference the `user-ca-bundle` config map in the `trustedCA` field. The allowed values are `Proxyonly` and `Always`. Use `Proxyonly` to reference the `user-ca-bundle` config map only when `http/https` proxy is configured. Use `Always` to always reference the `user-ca-bundle` config map. The default value is `Proxyonly`.

The installation program does not support the proxy readinessEndpoints field.

If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:

$ ./openshift-install wait-for install-complete --log-level debug

Save the file and reference it when installing OpenShift Container Platform.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Alternatives to storing administrator-level secrets in the kube-system project

By default, administrator secrets are stored in the kube-system project. If you configured the credentialsMode parameter in the install-config.yaml file to Manual, you must use one of the following alternatives:

To manage long-term cloud credentials manually, follow the procedure in Manually creating long-term credentials.
To implement short-term credentials that are managed outside the cluster for individual components, follow the procedures in Configuring an AWS cluster to use short-term credentials.

Manually creating long-term credentials

The Cloud Credential Operator (CCO) can be put into manual mode prior to installation in environments where the cloud identity and access management (IAM) APIs are not reachable, or the administrator prefers not to store an administrator-level credential secret in the cluster kube-system namespace.

Procedure

If you did not set the credentialsMode parameter in the install-config.yaml configuration file to Manual, modify the value as shown:
Sample configuration file snippet
```
apiVersion: v1
baseDomain: example.com
credentialsMode: Manual
# ...
```
If you have not previously created installation manifest files, do so by running the following command:
```
$ openshift-install create manifests --dir <installation_directory>
```
where <installation_directory> is the directory in which the installation program creates files.
Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:
```
$ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
```

Extract the list of CredentialsRequest custom resources (CRs) from the OpenShift Container Platform release image by running the following command:

$ oc adm release extract \
  --from=$RELEASE_IMAGE \
  --credentials-requests \
  --included \(1)
  --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \(2)
  --to=<path_to_directory_for_credentials_requests> (3)

1	The `--included` parameter includes only the manifests that your specific cluster configuration requires.
2	Specify the location of the `install-config.yaml` file.
3	Specify the path to the directory where you want to store the `CredentialsRequest` objects. If the specified directory does not exist, this command creates it.

This command creates a YAML file for each CredentialsRequest object.

Sample CredentialsRequest object

apiVersion: cloudcredential.openshift.io/v1
kind: CredentialsRequest
metadata:
  name: <component_credentials_request>
  namespace: openshift-cloud-credential-operator
  ...
spec:
  providerSpec:
    apiVersion: cloudcredential.openshift.io/v1
    kind: AWSProviderSpec
    statementEntries:
    - effect: Allow
      action:
      - iam:GetUser
      - iam:GetUserPolicy
      - iam:ListAccessKeys
      resource: "*"
  ...

Create YAML files for secrets in the openshift-install manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in the spec.secretRef for each CredentialsRequest object.

Sample CredentialsRequest object with secrets

apiVersion: cloudcredential.openshift.io/v1
kind: CredentialsRequest
metadata:
  name: <component_credentials_request>
  namespace: openshift-cloud-credential-operator
  ...
spec:
  providerSpec:
    apiVersion: cloudcredential.openshift.io/v1
    kind: AWSProviderSpec
    statementEntries:
    - effect: Allow
      action:
      - s3:CreateBucket
      - s3:DeleteBucket
      resource: "*"
      ...
  secretRef:
    name: <component_secret>
    namespace: <component_namespace>
  ...

Sample Secret object

apiVersion: v1
kind: Secret
metadata:
  name: <component_secret>
  namespace: <component_namespace>
data:
  aws_access_key_id: <base64_encoded_aws_access_key_id>
  aws_secret_access_key: <base64_encoded_aws_secret_access_key>

Before upgrading a cluster that uses manually maintained credentials, you must ensure that the CCO is in an upgradeable state.

Configuring an AWS cluster to use short-term credentials

To install a cluster that is configured to use the AWS Security Token Service (STS), you must configure the CCO utility and create the required AWS resources for your cluster.

Configuring the Cloud Credential Operator utility

To create and manage cloud credentials from outside of the cluster when the Cloud Credential Operator (CCO) is operating in manual mode, extract and prepare the CCO utility (ccoctl) binary.

The ccoctl utility is a Linux binary that must run in a Linux environment.

Prerequisites

You have access to an OpenShift Container Platform account with cluster administrator access.
You have installed the OpenShift CLI (oc).

You have created an AWS account for the ccoctl utility to use with the following permissions:
Required AWS permissions
Required iam permissions
- iam:CreateOpenIDConnectProvider
- iam:CreateRole
- iam:DeleteOpenIDConnectProvider
- iam:DeleteRole
- iam:DeleteRolePolicy
- iam:GetOpenIDConnectProvider
- iam:GetRole
- iam:GetUser
- iam:ListOpenIDConnectProviders
- iam:ListRolePolicies
- iam:ListRoles
- iam:PutRolePolicy
- iam:TagOpenIDConnectProvider
- iam:TagRole
Required s3 permissions
- s3:CreateBucket
- s3:DeleteBucket
- s3:DeleteObject
- s3:GetBucketAcl
- s3:GetBucketTagging
- s3:GetObject
- s3:GetObjectAcl
- s3:GetObjectTagging
- s3:ListBucket
- s3:PutBucketAcl
- s3:PutBucketPolicy
- s3:PutBucketPublicAccessBlock
- s3:PutBucketTagging
- s3:PutObject
- s3:PutObjectAcl
- s3:PutObjectTagging
Required cloudfront permissions
- cloudfront:ListCloudFrontOriginAccessIdentities
- cloudfront:ListDistributions
- cloudfront:ListTagsForResource
If you plan to store the OIDC configuration in a private S3 bucket that is accessed by the IAM identity provider through a public CloudFront distribution URL, the AWS account that runs the ccoctl utility requires the following additional permissions:
Additional permissions for a private S3 bucket with CloudFront
- cloudfront:CreateCloudFrontOriginAccessIdentity
- cloudfront:CreateDistribution
- cloudfront:DeleteCloudFrontOriginAccessIdentity
- cloudfront:DeleteDistribution
- cloudfront:GetCloudFrontOriginAccessIdentity
- cloudfront:GetCloudFrontOriginAccessIdentityConfig
- cloudfront:GetDistribution
- cloudfront:TagResource
- cloudfront:UpdateDistribution
These additional permissions support the use of the --create-private-s3-bucket option when processing credentials requests with the ccoctl aws create-all command.

Procedure

Set a variable for the OpenShift Container Platform release image by running the following command:
```
$ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
```
Obtain the CCO container image from the OpenShift Container Platform release image by running the following command:
```
$ CCO_IMAGE=$(oc adm release info --image-for='cloud-credential-operator' $RELEASE_IMAGE -a ~/.pull-secret)
```
Ensure that the architecture of the $RELEASE_IMAGE matches the architecture of the environment in which you will use the ccoctl tool.

Extract the ccoctl binary from the CCO container image within the OpenShift Container Platform release image by running the following command:

$ oc image extract $CCO_IMAGE \
  --file="/usr/bin/ccoctl.<rhel_version>" \(1)
  -a ~/.pull-secret

For <rhel_version>, specify the value that corresponds to the version of Red Hat Enterprise Linux (RHEL) that the host uses. If no value is specified, ccoctl.rhel8 is used by default. The following values are valid:

rhel8: Specify this value for hosts that use RHEL 8.
rhel9: Specify this value for hosts that use RHEL 9.

Change the permissions to make ccoctl executable by running the following command:
```
$ chmod 775 ccoctl.<rhel_version>
```

Verification

To verify that ccoctl is ready to use, display the help file by running the following command:

$ ccoctl --help

Output of ccoctl --help

OpenShift credentials provisioning tool

Usage:
  ccoctl [command]

Available Commands:
  aws          Manage credentials objects for AWS cloud
  azure        Manage credentials objects for Azure
  gcp          Manage credentials objects for Google cloud
  help         Help about any command
  ibmcloud     Manage credentials objects for IBM Cloud
  nutanix      Manage credentials objects for Nutanix

Flags:
  -h, --help   help for ccoctl

Use "ccoctl [command] --help" for more information about a command.

Creating AWS resources with the Cloud Credential Operator utility

You have the following options when creating AWS resources:

You can use the ccoctl aws create-all command to create the AWS resources automatically. This is the quickest way to create the resources. See Creating AWS resources with a single command.
If you need to review the JSON files that the ccoctl tool creates before modifying AWS resources, or if the process the ccoctl tool uses to create AWS resources automatically does not meet the requirements of your organization, you can create the AWS resources individually. See Creating AWS resources individually.

Creating AWS resources with a single command

If the process the ccoctl tool uses to create AWS resources automatically meets the requirements of your organization, you can use the ccoctl aws create-all command to automate the creation of AWS resources.

Otherwise, you can create the AWS resources individually. For more information, see "Creating AWS resources individually".

By default, ccoctl creates objects in the directory in which the commands are run. To create the objects in a different directory, use the --output-dir flag. This procedure uses <path_to_ccoctl_output_dir> to refer to this directory.

Prerequisites

You must have:

Extracted and prepared the ccoctl binary.

Procedure

Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:
```
$ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
```

Extract the list of CredentialsRequest objects from the OpenShift Container Platform release image by running the following command:

$ oc adm release extract \
  --from=$RELEASE_IMAGE \
  --credentials-requests \
  --included \(1)
  --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \(2)
  --to=<path_to_directory_for_credentials_requests> (3)

1	The `--included` parameter includes only the manifests that your specific cluster configuration requires.
2	Specify the location of the `install-config.yaml` file.
3	Specify the path to the directory where you want to store the `CredentialsRequest` objects. If the specified directory does not exist, this command creates it.

This command might take a few moments to run.

Use the ccoctl tool to process all CredentialsRequest objects by running the following command:

$ ccoctl aws create-all \
  --name=<name> \(1)
  --region=<aws_region> \(2)
  --credentials-requests-dir=<path_to_credentials_requests_directory> \(3)
  --output-dir=<path_to_ccoctl_output_dir> \(4)
  --create-private-s3-bucket (5)

1	Specify the name used to tag any cloud resources that are created for tracking.
2	Specify the AWS region in which cloud resources will be created.
3	Specify the directory containing the files for the component `CredentialsRequest` objects.
4	Optional: Specify the directory in which you want the `ccoctl` utility to create objects. By default, the utility creates objects in the directory in which the commands are run.
5	Optional: By default, the `ccoctl` utility stores the OpenID Connect (OIDC) configuration files in a public S3 bucket and uses the S3 URL as the public OIDC endpoint. To store the OIDC configuration in a private S3 bucket that is accessed by the IAM identity provider through a public CloudFront distribution URL instead, use the `--create-private-s3-bucket` parameter.

If your cluster uses Technology Preview features that are enabled by the TechPreviewNoUpgrade feature set, you must include the --enable-tech-preview parameter.

Verification

To verify that the OpenShift Container Platform secrets are created, list the files in the <path_to_ccoctl_output_dir>/manifests directory:

$ ls <path_to_ccoctl_output_dir>/manifests

Example output

cluster-authentication-02-config.yaml
openshift-cloud-credential-operator-cloud-credential-operator-iam-ro-creds-credentials.yaml
openshift-cloud-network-config-controller-cloud-credentials-credentials.yaml
openshift-cluster-api-capa-manager-bootstrap-credentials-credentials.yaml
openshift-cluster-csi-drivers-ebs-cloud-credentials-credentials.yaml
openshift-image-registry-installer-cloud-credentials-credentials.yaml
openshift-ingress-operator-cloud-credentials-credentials.yaml
openshift-machine-api-aws-cloud-credentials-credentials.yaml

You can verify that the IAM roles are created by querying AWS. For more information, refer to AWS documentation on listing IAM roles.

Creating AWS resources individually

You can use the ccoctl tool to create AWS resources individually. This option might be useful for an organization that shares the responsibility for creating these resources among different users or departments.

Otherwise, you can use the ccoctl aws create-all command to create the AWS resources automatically. For more information, see "Creating AWS resources with a single command".

Some ccoctl commands make AWS API calls to create or modify AWS resources. You can use the --dry-run flag to avoid making API calls. Using this flag creates JSON files on the local file system instead. You can review and modify the JSON files and then apply them with the AWS CLI tool using the --cli-input-json parameters.

Prerequisites

Extract and prepare the ccoctl binary.

Procedure

Generate the public and private RSA key files that are used to set up the OpenID Connect provider for the cluster by running the following command:
```
$ ccoctl aws create-key-pair
```
Example output
```
2021/04/13 11:01:02 Generating RSA keypair
2021/04/13 11:01:03 Writing private key to /<path_to_ccoctl_output_dir>/serviceaccount-signer.private
2021/04/13 11:01:03 Writing public key to /<path_to_ccoctl_output_dir>/serviceaccount-signer.public
2021/04/13 11:01:03 Copying signing key for use by installer
```
where serviceaccount-signer.private and serviceaccount-signer.public are the generated key files.

This command also creates a private key that the cluster requires during installation in /<path_to_ccoctl_output_dir>/tls/bound-service-account-signing-key.key.

Create an OpenID Connect identity provider and S3 bucket on AWS by running the following command:

$ ccoctl aws create-identity-provider \
  --name=<name> \(1)
  --region=<aws_region> \(2)
  --public-key-file=<path_to_ccoctl_output_dir>/serviceaccount-signer.public (3)

1	`<name>` is the name used to tag any cloud resources that are created for tracking.
2	`<aws-region>` is the AWS region in which cloud resources will be created.
3	`<path_to_ccoctl_output_dir>` is the path to the public key file that the `ccoctl aws create-key-pair` command generated.

Example output

2021/04/13 11:16:09 Bucket <name>-oidc created
2021/04/13 11:16:10 OpenID Connect discovery document in the S3 bucket <name>-oidc at .well-known/openid-configuration updated
2021/04/13 11:16:10 Reading public key
2021/04/13 11:16:10 JSON web key set (JWKS) in the S3 bucket <name>-oidc at keys.json updated
2021/04/13 11:16:18 Identity Provider created with ARN: arn:aws:iam::<aws_account_id>:oidc-provider/<name>-oidc.s3.<aws_region>.amazonaws.com

where openid-configuration is a discovery document and keys.json is a JSON web key set file.

This command also creates a YAML configuration file in /<path_to_ccoctl_output_dir>/manifests/cluster-authentication-02-config.yaml. This file sets the issuer URL field for the service account tokens that the cluster generates, so that the AWS IAM identity provider trusts the tokens.

Create IAM roles for each component in the cluster:

Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:
```
$ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')
```

Extract the list of CredentialsRequest objects from the OpenShift Container Platform release image:

$ oc adm release extract \
  --from=$RELEASE_IMAGE \
  --credentials-requests \
  --included \(1)
  --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \(2)
  --to=<path_to_directory_for_credentials_requests> (3)

1	The `--included` parameter includes only the manifests that your specific cluster configuration requires.
2	Specify the location of the `install-config.yaml` file.
3	Specify the path to the directory where you want to store the `CredentialsRequest` objects. If the specified directory does not exist, this command creates it.

Use the ccoctl tool to process all CredentialsRequest objects by running the following command:

$ ccoctl aws create-iam-roles \
  --name=<name> \
  --region=<aws_region> \
  --credentials-requests-dir=<path_to_credentials_requests_directory> \
  --identity-provider-arn=arn:aws:iam::<aws_account_id>:oidc-provider/<name>-oidc.s3.<aws_region>.amazonaws.com

For AWS environments that use alternative IAM API endpoints, such as GovCloud, you must also specify your region with the --region parameter.

If your cluster uses Technology Preview features that are enabled by the TechPreviewNoUpgrade feature set, you must include the --enable-tech-preview parameter.

For each CredentialsRequest object, ccoctl creates an IAM role with a trust policy that is tied to the specified OIDC identity provider, and a permissions policy as defined in each CredentialsRequest object from the OpenShift Container Platform release image.

Verification

To verify that the OpenShift Container Platform secrets are created, list the files in the <path_to_ccoctl_output_dir>/manifests directory:

$ ls <path_to_ccoctl_output_dir>/manifests

Example output

cluster-authentication-02-config.yaml
openshift-cloud-credential-operator-cloud-credential-operator-iam-ro-creds-credentials.yaml
openshift-cloud-network-config-controller-cloud-credentials-credentials.yaml
openshift-cluster-api-capa-manager-bootstrap-credentials-credentials.yaml
openshift-cluster-csi-drivers-ebs-cloud-credentials-credentials.yaml
openshift-image-registry-installer-cloud-credentials-credentials.yaml
openshift-ingress-operator-cloud-credentials-credentials.yaml
openshift-machine-api-aws-cloud-credentials-credentials.yaml

You can verify that the IAM roles are created by querying AWS. For more information, refer to AWS documentation on listing IAM roles.

Incorporating the Cloud Credential Operator utility manifests

To implement short-term security credentials managed outside the cluster for individual components, you must move the manifest files that the Cloud Credential Operator utility (ccoctl) created to the correct directories for the installation program.

Prerequisites

You have configured an account with the cloud platform that hosts your cluster.
You have configured the Cloud Credential Operator utility (ccoctl).
You have created the cloud provider resources that are required for your cluster with the ccoctl utility.

Procedure

If you did not set the credentialsMode parameter in the install-config.yaml configuration file to Manual, modify the value as shown:
Sample configuration file snippet
```
apiVersion: v1
baseDomain: example.com
credentialsMode: Manual
# ...
```
If you have not previously created installation manifest files, do so by running the following command:
```
$ openshift-install create manifests --dir <installation_directory>
```
where <installation_directory> is the directory in which the installation program creates files.
Copy the manifests that the ccoctl utility generated to the manifests directory that the installation program created by running the following command:
```
$ cp /<path_to_ccoctl_output_dir>/manifests/* ./manifests/
```
Copy the private key that the ccoctl utility generated in the tls directory to the installation directory by running the following command:
```
$ cp -a /<path_to_ccoctl_output_dir>/tls .
```

Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

You have configured an account with the cloud platform that hosts your cluster.
You have the OpenShift Container Platform installation program and the pull secret for your cluster.
You have verified that the cloud provider account on your host has the correct permissions to deploy the cluster. An account with incorrect permissions causes the installation process to fail with an error message that displays the missing permissions.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ (1)
    --log-level=info (2)
```
1 For <installation_directory>, specify the location of your customized ./install-config.yaml file.

2 To view different installation details, specify warn, debug, or error instead of info.
Optional: Remove or disable the AdministratorAccess policy from the IAM account that you used to install the cluster.

The elevated permissions provided by the AdministratorAccess policy are required only during installation.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

Logging in to the cluster by using the CLI

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)
```
1 For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

Logging in to the cluster by using the web console

The kubeadmin user exists by default after an OpenShift Container Platform installation. You can log in to your cluster as the kubeadmin user by using the OpenShift Container Platform web console.

Prerequisites

You have access to the installation host.
You completed a cluster installation and all cluster Operators are available.

Procedure

Obtain the password for the kubeadmin user from the kubeadmin-password file on the installation host:
```
$ cat <installation_directory>/auth/kubeadmin-password
```
Alternatively, you can obtain the kubeadmin password from the <installation_directory>/.openshift_install.log log file on the installation host.
List the OpenShift Container Platform web console route:
```
$ oc get routes -n openshift-console | grep 'console-openshift'
```
Alternatively, you can obtain the OpenShift Container Platform route from the <installation_directory>/.openshift_install.log log file on the installation host.
Example output
```
console     console-openshift-console.apps.<cluster_name>.<base_domain>            console     https   reencrypt/Redirect   None
```
Navigate to the route detailed in the output of the preceding command in a web browser and log in as the kubeadmin user.

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

Next steps

Validating an installation.
Customize your cluster.
If necessary, you can opt out of remote health reporting.
If necessary, you can remove cloud provider credentials.

1	For `<installation_directory>`, specify the location of your customized `./install-config.yaml` file.
2	To view different installation details, specify `warn`, `debug`, or `error` instead of `info`.

Installing a cluster on AWS with customizations

Prerequisites

Obtaining an AWS Marketplace image

Creating the installation configuration file

Minimum resource requirements for cluster installation

Tested instance types for AWS

Tested instance types for AWS on 64-bit ARM infrastructures

Sample customized install-config.yaml file for AWS

Configuring the cluster-wide proxy during installation

Alternatives to storing administrator-level secrets in the kube-system project

Manually creating long-term credentials

Configuring an AWS cluster to use short-term credentials

Configuring the Cloud Credential Operator utility

Creating AWS resources with the Cloud Credential Operator utility

Creating AWS resources with a single command

Creating AWS resources individually

Incorporating the Cloud Credential Operator utility manifests

Deploying the cluster

Logging in to the cluster by using the CLI

Logging in to the cluster by using the web console

Next steps