1. Documentation
    2. history bug_report picture_as_pdf
×

Configuring a shared container directory for the image-based upgrade

Your single-node OpenShift clusters need to have a shared var/lib/containers partition for the image-based upgrade. You can do this at install time.

Configuring a shared container directory between ostree stateroots

Apply a MachineConfig to both the seed and the target clusters during installation time to create a separate partition and share the /var/lib/containers directory between the two ostree stateroots that will be used during the upgrade process.

You must complete this procedure at installation time.
Procedure

  • Apply a MachineConfig to create a separate partition:

    apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
  labels:
    machineconfiguration.openshift.io/role: master
  name: 98-var-lib-containers-partitioned
spec:
  config:
    ignition:
      version: 3.2.0
    storage:
      disks:
        - device: /dev/disk/by-id/wwn-<root_disk> (1)
          partitions:
            - label: varlibcontainers
              startMiB: <start_of_partition> (2)
              sizeMiB: <partition_size> (3)
      filesystems:
        - device: /dev/disk/by-partlabel/varlibcontainers
          format: xfs
          mountOptions:
            - defaults
            - prjquota
          path: /var/lib/containers
          wipeFilesystem: true
    systemd:
      units:
        - contents: |-
            # Generated by Butane
            [Unit]
            Before=local-fs.target
            Requires=systemd-fsck@dev-disk-by\x2dpartlabel-varlibcontainers.service
            After=systemd-fsck@dev-disk-by\x2dpartlabel-varlibcontainers.service

            [Mount]
            Where=/var/lib/containers
            What=/dev/disk/by-partlabel/varlibcontainers
            Type=xfs
            Options=defaults,prjquota

            [Install]
            RequiredBy=local-fs.target
          enabled: true
          name: var-lib-containers.mount
    1 Specify the root disk.
    2 Specify the start of the partition in MiB. If the value is too small, the installation will fail.
    3 Specify a minimum size for the partition of 500 GB to ensure adequate disk space for precached images. If the value is too small, the deployments after installation will fail.

Configuring a shared container directory between ostree stateroots when using GitOps ZTP

When you are using the GitOps Zero Touch Provisioning (ZTP) workflow, you do the following procedure to create a separate disk partition on both the seed and target cluster and to share the /var/lib/containers directory.

You must complete this procedure at installation time.
Prerequisites

  • Install Butane.

Procedure

  1. Create the storage.bu file:

    variant: fcos
version: 1.3.0
storage:
  disks:
  - device: /dev/disk/by-id/wwn-<root_disk> (1)
    wipe_table: false
    partitions:
    - label: var-lib-containers
      start_mib: <start_of_partition> (2)
      size_mib: <partition_size> (3)
  filesystems:
    - path: /var/lib/containers
      device: /dev/disk/by-partlabel/var-lib-containers
      format: xfs
      wipe_filesystem: true
      with_mount_unit: true
      mount_options:
        - defaults
        - prjquota
    1 Specify the root disk.
    2 Specify the start of the partition in MiB. If the value is too small, the installation will fail.
    3 Specify a minimum size for the partition of 500 GB to ensure adequate disk space for precached images. If the value is too small, the deployments after installation will fail.

  2. Convert the storage.bu to an Ignition file:

    $ butane storage.bu
    Example output
    {"ignition":{"version":"3.2.0"},"storage":{"disks":[{"device":"/dev/disk/by-id/wwn-0x6b07b250ebb9d0002a33509f24af1f62","partitions":[{"label":"var-lib-containers","sizeMiB":0,"startMiB":250000}],"wipeTable":false}],"filesystems":[{"device":"/dev/disk/by-partlabel/var-lib-containers","format":"xfs","mountOptions":["defaults","prjquota"],"path":"/var/lib/containers","wipeFilesystem":true}]},"systemd":{"units":[{"contents":"# Generated by Butane\n[Unit]\nRequires=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\nAfter=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\n\n[Mount]\nWhere=/var/lib/containers\nWhat=/dev/disk/by-partlabel/var-lib-containers\nType=xfs\nOptions=defaults,prjquota\n\n[Install]\nRequiredBy=local-fs.target","enabled":true,"name":"var-lib-containers.mount"}]}}

  3. Copy the output into the .spec.clusters.nodes.ignitionConfigOverride field in the SiteConfig CR:

    [...]
spec:
  clusters:
    - nodes:
        - ignitionConfigOverride: '{"ignition":{"version":"3.2.0"},"storage":{"disks":[{"device":"/dev/disk/by-id/wwn-0x6b07b250ebb9d0002a33509f24af1f62","partitions":[{"label":"var-lib-containers","sizeMiB":0,"startMiB":250000}],"wipeTable":false}],"filesystems":[{"device":"/dev/disk/by-partlabel/var-lib-containers","format":"xfs","mountOptions":["defaults","prjquota"],"path":"/var/lib/containers","wipeFilesystem":true}]},"systemd":{"units":[{"contents":"# Generated by Butane\n[Unit]\nRequires=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\nAfter=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\n\n[Mount]\nWhere=/var/lib/containers\nWhat=/dev/disk/by-partlabel/var-lib-containers\nType=xfs\nOptions=defaults,prjquota\n\n[Install]\nRequiredBy=local-fs.target","enabled":true,"name":"var-lib-containers.mount"}]}}'
[...]
Verification

  1. During or after installation, verify on the hub cluster that the BareMetalHost object shows the annotation:

    $ oc get bmh -n my-sno-ns my-sno -ojson | jq '.metadata.annotations["bmac.agent-install.openshift.io/ignition-config-overrides"]
    Example output
    "{\"ignition\":{\"version\":\"3.2.0\"},\"storage\":{\"disks\":[{\"device\":\"/dev/disk/by-id/wwn-0x6b07b250ebb9d0002a33509f24af1f62\",\"partitions\":[{\"label\":\"var-lib-containers\",\"sizeMiB\":0,\"startMiB\":250000}],\"wipeTable\":false}],\"filesystems\":[{\"device\":\"/dev/disk/by-partlabel/var-lib-containers\",\"format\":\"xfs\",\"mountOptions\":[\"defaults\",\"prjquota\"],\"path\":\"/var/lib/containers\",\"wipeFilesystem\":true}]},\"systemd\":{\"units\":[{\"contents\":\"# Generated by Butane\\n[Unit]\\nRequires=systemd-fsck@dev-disk-by\\\\x2dpartlabel-var\\\\x2dlib\\\\x2dcontainers.service\\nAfter=systemd-fsck@dev-disk-by\\\\x2dpartlabel-var\\\\x2dlib\\\\x2dcontainers.service\\n\\n[Mount]\\nWhere=/var/lib/containers\\nWhat=/dev/disk/by-partlabel/var-lib-containers\\nType=xfs\\nOptions=defaults,prjquota\\n\\n[Install]\\nRequiredBy=local-fs.target\",\"enabled\":true,\"name\":\"var-lib-containers.mount\"}]}}"

  2. After installation, check the single-node OpenShift disk status:

    # lsblk
    Example output
    NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda      8:0    0 446.6G  0 disk
├─sda1   8:1    0     1M  0 part
├─sda2   8:2    0   127M  0 part
├─sda3   8:3    0   384M  0 part /boot
├─sda4   8:4    0 243.6G  0 part /var
│                                /sysroot/ostree/deploy/rhcos/var
│                                /usr
│                                /etc
│                                /
│                                /sysroot
└─sda5   8:5    0 202.5G  0 part /var/lib/containers
    # df -h
    Example output
    Filesystem      Size  Used Avail Use% Mounted on
devtmpfs        4.0M     0  4.0M   0% /dev
tmpfs           126G   84K  126G   1% /dev/shm
tmpfs            51G   93M   51G   1% /run
/dev/sda4       244G  5.2G  239G   3% /sysroot
tmpfs           126G  4.0K  126G   1% /tmp
/dev/sda5       203G  119G   85G  59% /var/lib/containers
/dev/sda3       350M  110M  218M  34% /boot
tmpfs            26G     0   26G   0% /run/user/1000