Prometheus [monitoring.coreos.com/v1]

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta_v2 meta/v1

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

Specification of the desired behavior of the Prometheus cluster. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

status

object

Most recent observed status of the Prometheus cluster. Read-only. Not included when requesting from the apiserver, only from the Prometheus Operator API itself. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

additionalAlertManagerConfigs

object

AdditionalAlertManagerConfigs allows specifying a key of a Secret containing additional Prometheus AlertManager configurations. AlertManager configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alertmanager_config. As AlertManager configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible AlertManager configs are going to break Prometheus after the upgrade.

additionalAlertRelabelConfigs

object

AdditionalAlertRelabelConfigs allows specifying a key of a Secret containing additional Prometheus alert relabel configurations. Alert relabel configurations specified are appended to the configurations generated by the Prometheus Operator. Alert relabel configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alert_relabel_configs. As alert relabel configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible alert relabel configs are going to break Prometheus after the upgrade.

additionalScrapeConfigs

object

AdditionalScrapeConfigs allows specifying a key of a Secret containing additional Prometheus scrape configurations. Scrape configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config. As scrape configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible scrape configs are going to break Prometheus after the upgrade.

affinity

object

If specified, the pod’s scheduling constraints.

alerting

object

Define details regarding alerting.

allowOverlappingBlocks

boolean

AllowOverlappingBlocks enables vertical compaction and vertical query merge in Prometheus. This is still experimental in Prometheus so it may change in any upcoming release.

apiserverConfig

object

APIServerConfig allows specifying a host and auth methods to access apiserver. If left empty, Prometheus is assumed to run inside of the cluster and will discover API servers automatically and use the pod’s CA certificate and bearer token file at /var/run/secrets/kubernetes.io/serviceaccount/.

arbitraryFSAccessThroughSMs

object

ArbitraryFSAccessThroughSMs configures whether configuration based on a service monitor can access arbitrary files on the file system of the Prometheus container e.g. bearer token files.

baseImage

string

Base image to use for a Prometheus deployment. Deprecated: use 'image' instead

configMaps

array (string)

ConfigMaps is a list of ConfigMaps in the same namespace as the Prometheus object, which shall be mounted into the Prometheus Pods. The ConfigMaps are mounted into /etc/prometheus/configmaps/<configmap-name>.

containers

array

Containers allows injecting additional containers or modifying operator generated containers. This can be used to allow adding an authentication proxy to a Prometheus pod or to change the behavior of an operator generated container. Containers described here modify an operator generated container if they share the same name and modifications are done via a strategic merge patch. The current container names are: prometheus, config-reloader, and thanos-sidecar. Overriding containers is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice.

containers[]

object

A single application container that you want to run within a pod.

disableCompaction

boolean

Disable prometheus compaction.

enableAdminAPI

boolean

Enable access to prometheus web admin API. Defaults to the value of false. WARNING: Enabling the admin APIs enables mutating endpoints, to delete data, shutdown Prometheus, and more. Enabling this should be done with care and the user is advised to add additional authentication authorization via a proxy to ensure only clients authorized to perform these actions can do so. For more information see https://prometheus.io/docs/prometheus/latest/querying/api/#tsdb-admin-apis

enforcedNamespaceLabel

string

EnforcedNamespaceLabel enforces adding a namespace label of origin for each alert and metric that is user created. The label value will always be the namespace of the object that is being created.

enforcedSampleLimit

integer

EnforcedSampleLimit defines global limit on number of scraped samples that will be accepted. This overrides any SampleLimit set per ServiceMonitor or/and PodMonitor. It is meant to be used by admins to enforce the SampleLimit to keep overall number of samples/series under the desired limit. Note that if SampleLimit is lower that value will be taken instead.

enforcedTargetLimit

integer

EnforcedTargetLimit defines a global limit on the number of scraped targets. This overrides any TargetLimit set per ServiceMonitor or/and PodMonitor. It is meant to be used by admins to enforce the TargetLimit to keep overall number of targets under the desired limit. Note that if TargetLimit is higher that value will be taken instead.

evaluationInterval

string

Interval between consecutive evaluations.

externalLabels

object (string)

The labels to add to any time series or alerts when communicating with external systems (federation, remote storage, Alertmanager).

externalUrl

string

The external URL the Prometheus instances will be available under. This is necessary to generate correct URLs. This is necessary if Prometheus is not served from root of a DNS name.

ignoreNamespaceSelectors

boolean

IgnoreNamespaceSelectors if set to true will ignore NamespaceSelector settings from the podmonitor and servicemonitor configs, and they will only discover endpoints within their current namespace. Defaults to false.

image

string

Image if specified has precedence over baseImage, tag and sha combinations. Specifying the version is still necessary to ensure the Prometheus Operator knows what version of Prometheus is being configured.

imagePullSecrets

array

An optional list of references to secrets in the same namespace to use for pulling prometheus and alertmanager images from registries see http://kubernetes.io/docs/user-guide/images#specifying-imagepullsecrets-on-a-pod

imagePullSecrets[]

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

initContainers

array

InitContainers allows adding initContainers to the pod definition. Those can be used to e.g. fetch secrets for injection into the Prometheus configuration from external sources. Any errors during the execution of an initContainer will lead to a restart of the Pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ Using initContainers for any use case other then secret fetching is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice.

initContainers[]

object

A single application container that you want to run within a pod.

listenLocal

boolean

ListenLocal makes the Prometheus server listen on loopback, so that it does not bind against the Pod IP.

logFormat

string

Log format for Prometheus to be configured with.

logLevel

string

Log level for Prometheus to be configured with.

nodeSelector

object (string)

Define which Nodes the Pods are scheduled on.

overrideHonorLabels

boolean

OverrideHonorLabels if set to true overrides all user configured honor_labels. If HonorLabels is set in ServiceMonitor or PodMonitor to true, this overrides honor_labels to false.

overrideHonorTimestamps

boolean

OverrideHonorTimestamps allows to globally enforce honoring timestamps in all scrape configs.

paused

boolean

When a Prometheus deployment is paused, no actions except for deletion will be performed on the underlying objects.

podMetadata

object

PodMetadata configures Labels and Annotations which are propagated to the prometheus pods.

podMonitorNamespaceSelector

object

Namespace’s labels to match for PodMonitor discovery. If nil, only check own namespace.

podMonitorSelector

object

Experimental PodMonitors to be selected for target discovery. Deprecated: if neither this nor serviceMonitorSelector are specified, configuration is unmanaged.

portName

string

Port name used for the pods and governing service. This defaults to web

priorityClassName

string

Priority class assigned to the Pods

probeNamespaceSelector

object

Experimental Namespaces to be selected for Probe discovery. If nil, only check own namespace.

probeSelector

object

Experimental Probes to be selected for target discovery.

prometheusExternalLabelName

string

Name of Prometheus external label used to denote Prometheus instance name. Defaults to the value of prometheus. External label will not be added when value is set to empty string ("").

prometheusRulesExcludedFromEnforce

array

PrometheusRulesExcludedFromEnforce - list of prometheus rules to be excluded from enforcing of adding namespace labels. Works only if enforcedNamespaceLabel set to true. Make sure both ruleNamespace and ruleName are set for each pair

prometheusRulesExcludedFromEnforce[]

object

PrometheusRuleExcludeConfig enables users to configure excluded PrometheusRule names and their namespaces to be ignored while enforcing namespace label for alerts and metrics.

query

object

QuerySpec defines the query command line flags when starting Prometheus.

queryLogFile

string

QueryLogFile specifies the file to which PromQL queries are logged. Note that this location must be writable, and can be persisted using an attached volume. Alternatively, the location can be set to a stdout location such as /dev/stdout to log querie information to the default Prometheus log stream. This is only available in versions of Prometheus >= 2.16.0. For more details, see the Prometheus docs (https://prometheus.io/docs/guides/query-log/)

remoteRead

array

If specified, the remote_read spec. This is an experimental feature, it may change in any upcoming release in a breaking way.

remoteRead[]

object

RemoteReadSpec defines the remote_read configuration for prometheus.

remoteWrite

array

If specified, the remote_write spec. This is an experimental feature, it may change in any upcoming release in a breaking way.

remoteWrite[]

object

RemoteWriteSpec defines the remote_write configuration for prometheus.

replicaExternalLabelName

string

Name of Prometheus external label used to denote replica name. Defaults to the value of prometheus_replica. External label will not be added when value is set to empty string ("").

replicas

integer

Number of replicas of each shard to deploy for a Prometheus deployment. Number of replicas multiplied by shards is the total number of Pods created.

resources

object

Define resources requests and limits for single Pods.

retention

string

Time duration Prometheus shall retain data for. Default is '24h', and must match the regular expression [0-9]+(ms|s|m|h|d|w|y) (milliseconds seconds minutes hours days weeks years).

retentionSize

string

Maximum amount of disk space used by blocks. Supported units: B, KB, MB, GB, TB, PB, EB. Ex: 512MB.

routePrefix

string

The route prefix Prometheus registers HTTP handlers for. This is useful, if using ExternalURL and a proxy is rewriting HTTP routes of a request, and the actual ExternalURL is still true, but the server serves requests under a different route prefix. For example for use with kubectl proxy.

ruleNamespaceSelector

object

Namespaces to be selected for PrometheusRules discovery. If unspecified, only the same namespace as the Prometheus object is in is used.

ruleSelector

object

A selector to select which PrometheusRules to mount for loading alerting/recording rules from. Until (excluding) Prometheus Operator v0.24.0 Prometheus Operator will migrate any legacy rule ConfigMaps to PrometheusRule custom resources selected by RuleSelector. Make sure it does not match any config maps that you do not want to be migrated.

rules

object

/--rules.*/ command-line arguments.

scrapeInterval

string

Interval between consecutive scrapes.

scrapeTimeout

string

Number of seconds to wait for target to respond before erroring.

secrets

array (string)

Secrets is a list of Secrets in the same namespace as the Prometheus object, which shall be mounted into the Prometheus Pods. The Secrets are mounted into /etc/prometheus/secrets/<secret-name>.

securityContext

object

SecurityContext holds pod-level security attributes and common container settings. This defaults to the default PodSecurityContext.

serviceAccountName

string

ServiceAccountName is the name of the ServiceAccount to use to run the Prometheus Pods.

serviceMonitorNamespaceSelector

object

Namespace’s labels to match for ServiceMonitor discovery. If nil, only check own namespace.

serviceMonitorSelector

object

ServiceMonitors to be selected for target discovery. Deprecated: if neither this nor podMonitorSelector are specified, configuration is unmanaged.

sha

string

SHA of Prometheus container image to be deployed. Defaults to the value of version. Similar to a tag, but the SHA explicitly deploys an immutable container image. Version and Tag are ignored if SHA is set. Deprecated: use 'image' instead. The image digest can be specified as part of the image URL.

shards

integer

EXPERIMENTAL: Number of shards to distribute targets onto. Number of replicas multiplied by shards is the total number of Pods created. Note that scaling down shards will not reshard data onto remaining instances, it must be manually moved. Increasing shards will not reshard data either but it will continue to be available from the same instances. To query globally use Thanos sidecar and Thanos querier or remote write data to a central location. Sharding is done on the content of the address target meta-label.

storage

object

Storage spec to specify how storage shall be used.

tag

string

Tag of Prometheus container image to be deployed. Defaults to the value of version. Version is ignored if Tag is set. Deprecated: use 'image' instead. The image tag can be specified as part of the image URL.

thanos

object

Thanos configuration allows configuring various aspects of a Prometheus server in a Thanos environment. This section is experimental, it may change significantly without deprecation notice in any release. This is experimental and may change significantly without backward compatibility in any release.

tolerations

array

If specified, the pod’s tolerations.

tolerations[]

object

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

topologySpreadConstraints

array

If specified, the pod’s topology spread constraints.

topologySpreadConstraints[]

object

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

version

string

Version of Prometheus to be deployed.

volumeMounts

array

VolumeMounts allows configuration of additional VolumeMounts on the output StatefulSet definition. VolumeMounts specified will be appended to other VolumeMounts in the prometheus container, that are generated as a result of StorageSpec objects.

volumeMounts[]

object

VolumeMount describes a mounting of a Volume within a container.

volumes

array

Volumes allows configuration of additional volumes on the output StatefulSet definition. Volumes specified will be appended to other volumes that are generated as a result of StorageSpec objects.

volumes[]

object

Volume represents a named volume in a pod that may be accessed by any container in the pod.

walCompression

boolean

Enable compression of the write-ahead log using Snappy. This flag is only available in versions of Prometheus >= 2.11.0.

web

object

WebSpec defines the web command line flags when starting Prometheus.

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

nodeAffinity

object

Describes node affinity scheduling rules for the pod.

podAffinity

object

Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).

podAntiAffinity

object

Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

requiredDuringSchedulingIgnoredDuringExecution

object

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.

preference

object

A node selector term, associated with the corresponding weight.

weight

integer

Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

nodeSelectorTerms

array

Required. A list of node selector terms. The terms are ORed.

nodeSelectorTerms[]

object

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaces

array (string)

namespaces specifies which namespaces the labelSelector applies to (matches against); null or empty list means "this pod’s namespace"

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaces

array (string)

namespaces specifies which namespaces the labelSelector applies to (matches against); null or empty list means "this pod’s namespace"

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaces

array (string)

namespaces specifies which namespaces the labelSelector applies to (matches against); null or empty list means "this pod’s namespace"

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaces

array (string)

namespaces specifies which namespaces the labelSelector applies to (matches against); null or empty list means "this pod’s namespace"

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

alertmanagers

array

AlertmanagerEndpoints Prometheus should fire alerts against.

alertmanagers[]

object

AlertmanagerEndpoints defines a selection of a single Endpoints object containing alertmanager IPs to fire alerts against.

apiVersion

string

Version of the Alertmanager API that Prometheus uses to send alerts. It can be "v1" or "v2".

bearerTokenFile

string

BearerTokenFile to read from filesystem to use when authenticating to Alertmanager.

name

string

Name of Endpoints object in Namespace.

namespace

string

Namespace of Endpoints object.

pathPrefix

string

Prefix for the HTTP path alerts are pushed to.

port

integer-or-string

Port the Alertmanager API is exposed on.

scheme

string

Scheme to use when firing alerts.

timeout

string

Timeout is a per-target Alertmanager timeout when pushing alerts.

tlsConfig

object

TLS Config to use for alertmanager connection.

ca

object

Struct containing the CA cert to use for the targets.

caFile

string

Path to the CA cert in the Prometheus container to use for the targets.

cert

object

Struct containing the client cert file for the targets.

certFile

string

Path to the client cert file in the Prometheus container for the targets.

insecureSkipVerify

boolean

Disable target certificate validation.

keyFile

string

Path to the client key file in the Prometheus container for the targets.

keySecret

object

Secret containing the client key file for the targets.

serverName

string

Used to verify the hostname for the targets.

configMap

object

ConfigMap containing data to use for the targets.

secret

object

Secret containing data to use for the targets.

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the ConfigMap or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

configMap

object

ConfigMap containing data to use for the targets.

secret

object

Secret containing data to use for the targets.

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the ConfigMap or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

basicAuth

object

BasicAuth allow an endpoint to authenticate over basic authentication

bearerToken

string

Bearer token for accessing apiserver.

bearerTokenFile

string

File to read bearer token for accessing apiserver.

host

string

Host of apiserver. A valid string consisting of a hostname or IP followed by an optional port number

tlsConfig

object

TLS Config to use for accessing apiserver.

password

object

The secret in the service monitor namespace that contains the password for authentication.

username

object

The secret in the service monitor namespace that contains the username for authentication.

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

ca

object

Struct containing the CA cert to use for the targets.

caFile

string

Path to the CA cert in the Prometheus container to use for the targets.

cert

object

Struct containing the client cert file for the targets.

certFile

string

Path to the client cert file in the Prometheus container for the targets.

insecureSkipVerify

boolean

Disable target certificate validation.

keyFile

string

Path to the client key file in the Prometheus container for the targets.

keySecret

object

Secret containing the client key file for the targets.

serverName

string

Used to verify the hostname for the targets.

configMap

object

ConfigMap containing data to use for the targets.

secret

object

Secret containing data to use for the targets.

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the ConfigMap or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

configMap

object

ConfigMap containing data to use for the targets.

secret

object

Secret containing data to use for the targets.

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the ConfigMap or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

deny

boolean

args

array (string)

Arguments to the entrypoint. The docker image’s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double , ie: (VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

command

array (string)

Entrypoint array. Not executed within a shell. The docker image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double , ie: (VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

env

array

List of environment variables to set in the container. Cannot be updated.

env[]

object

EnvVar represents an environment variable present in a Container.

envFrom

array

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.

envFrom[]

object

EnvFromSource represents the source of a set of ConfigMaps

image

string

Docker image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.

imagePullPolicy

string

Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images

lifecycle

object

Actions that the management system should take in response to container lifecycle events. Cannot be updated.

livenessProbe

object

Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

name

string

Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.

ports

array

List of ports to expose from the container. Exposing a port here gives the system additional information about the network connections a container uses, but is primarily informational. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Cannot be updated.

ports[]

object

ContainerPort represents a network port in a single container.

readinessProbe

object

Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

resources

object

Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/

securityContext

object

Security options the pod should run with. More info: https://kubernetes.io/docs/concepts/policy/security-context/ More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/

startupProbe

object

StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod’s lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. This is a beta feature enabled by the StartupProbe feature flag. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

stdin

boolean

Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.

stdinOnce

boolean

Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false

terminationMessagePath

string

Optional: Path at which the file to which the container’s termination message will be written is mounted into the container’s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.

terminationMessagePolicy

string

Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.

tty

boolean

Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.

volumeDevices

array

volumeDevices is the list of block devices to be used by the container.

volumeDevices[]

object

volumeDevice describes a mapping of a raw block device within a container.

volumeMounts

array

Pod volumes to mount into the container’s filesystem. Cannot be updated.

volumeMounts[]

object

VolumeMount describes a mounting of a Volume within a container.

workingDir

string

Container’s working directory. If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated.

name

string

Name of the environment variable. Must be a C_IDENTIFIER.

value

string

Variable references $(VAR_NAME) are expanded using the previous defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double , ie: (VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".

valueFrom

object

Source for the environment variable’s value. Cannot be used if value is not empty.

configMapKeyRef

object

Selects a key of a ConfigMap.

fieldRef

object

Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels, metadata.annotations, spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.

resourceFieldRef

object

Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.

secretKeyRef

object

Selects a key of a secret in the pod’s namespace

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the ConfigMap or its key must be defined

apiVersion

string

Version of the schema the FieldPath is written in terms of, defaults to "v1".

fieldPath

string

Path of the field to select in the specified API version.

containerName

string

Container name: required for volumes, optional for env vars

divisor

integer-or-string

Specifies the output format of the exposed resources, defaults to "1"

resource

string

Required: resource to select

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

configMapRef

object

The ConfigMap to select from

prefix

string

An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.

secretRef

object

The Secret to select from

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the ConfigMap must be defined

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret must be defined