You can update, or upgrade, an OpenShift Container Platform cluster between minor versions.

Because of the difficulty of changing update channels by using oc, use the web console to change the update channel. It is recommended to complete the update process within the web console. You can follow the steps in Updating a cluster within a minor version by using the CLI to complete the update after you change to a 4.3 channel.

Prerequisites

If you are upgrading to this release from OpenShift Container Platform 4.2, you must restart all Pods after the upgrade is complete.

This is because the service CA is automatically rotated as of OpenShift Container Platform 4.3.5. The service CA is rotated during the upgrade and a restart is required afterward to ensure that all services are using the new service CA before the previous service CA expires.

After this one-time manual restart, subsequent upgrades and rotations will ensure restart before the service CA expires without requiring manual intervention.

About the OpenShift Container Platform update service

The OpenShift Container Platform update service is the hosted service that provides over-the-air updates to both OpenShift Container Platform and Red Hat Enterprise Linux CoreOS (RHCOS). It provides a graph, or diagram that contain vertices and the edges that connect them, of component Operators. The edges in the graph show which versions you can safely update to, and the vertices are update payloads that specify the intended state of the managed cluster components.

The Cluster Version Operator (CVO) in your cluster checks with the OpenShift Container Platform update service to see the valid updates and update paths based on current component versions and information in the graph. When you request an update, the OpenShift Container Platform CVO uses the release image for that update to upgrade your cluster. The release artifacts are hosted in Quay as container images.

To allow the OpenShift Container Platform update service to provide only compatible updates, a release verification pipeline exists to drive automation. Each release artifact is verified for compatibility with supported cloud platforms and system architectures as well as other component packages. After the pipeline confirms the suitability of a release, the OpenShift Container Platform update service notifies you that it is available.

Because the update service displays all valid updates, you must not force an update to a version that the update service does not display.

During continuous update mode, two controllers run. One continuously updates the payload manifests, applies them to the cluster, and outputs the status of the controlled rollout of the Operators, whether they are available, upgrading, or failed. The second controller polls the OpenShift Container Platform update service to determine if updates are available.

Reverting your cluster to a previous version, or a rollback, is not supported. Only upgrading to a newer version is supported.

During the upgrade process, the Machine Config Operator (MCO) applies the new configuration to your cluster machines. It cordons the number of nodes that is specified by the maxUnavailable field on the machine configuration pool and marks them as unavailable. By default, this value is set to 1. It then applies the new configuration and reboots the machine. If you use Red Hat Enterprise Linux (RHEL) machines as workers, the MCO does not update the kubelet on these machines because you must update the OpenShift API on them first. Because the specification for the new version is applied to the old kubelet, the RHEL machine cannot return to the Ready state. You cannot complete the update until the machines are available. However, the maximum number of nodes that are unavailable is set to ensure that normal cluster operations are likely to continue with that number of machines out of service.

OpenShift Container Platform upgrade channels and releases

In OpenShift Container Platform 4.1, Red Hat introduced the concept of channels for recommending the appropriate release versions for cluster upgrade. By controlling the pace of upgrades, these upgrade channels allow you to choose an upgrade strategy. Upgrade channels are tied to a minor version of OpenShift Container Platform. For instance, OpenShift Container Platform 4.3 upgrade channels will never include an upgrade to a 4.4 release. This strategy ensures that administrators explicitly decide to upgrade to the next minor version of OpenShift Container Platform. Upgrade channels control only release selection and do not impact the version of the cluster that you install; the openshift-install binary file for a specific version of OpenShift Container Platform always installs that version.

OpenShift Container Platform 4.3 offers the following upgrade channels:

  • candidate-4.3

  • fast-4.3

  • stable-4.3

candidate-4.3 channel

The candidate-4.3 channel contains candidate builds for a z-stream (4.3.z) release. Release candidates contain all the features of the product but are not supported. Use release candidate versions to test feature acceptance and assist in qualifying the next version of OpenShift Container Platform. A release candidate is any build that is available in the candidate channel, including ones that do not contain -rc in their names. After a version is available in the candidate channel, it goes through more quality checks. If it meets the quality standard, it is promoted to the fast-4.3 or stable-4.3 channels. Because of this strategy, if a specific release is available in both the candidate-4.3 channel and in the fast-4.3 or stable-4.3 channels, it is a Red Hat supported version. The candidate-4.3 channel can include release versions from which there are no recommended updates in any channel.

You can use the candidate-4.3 channel to upgrade from a previous minor version of OpenShift Container Platform.

Release candidates differ from the nightly builds found on the https://www.openshift.com/try site. Nightly builds are available for early access to features, but updating to or from nightly builds is neither recommended nor supported. Nightly builds are not available in any upgrade channel.

fast-4.3 channel

The fast-4.3 channel is updated with new 4.3 versions as soon as Red Hat declares the given version as a general availability release. As such, these releases are fully supported, are production quality, and have performed well while available as a release candidate in the candidate-4.3 channel from where they were promoted. Some time after a release appears in the fast-4.3 channel, it is added to the stable-4.3 channel. Releases never appear in the stable-4.3 channel before they appear in the fast-4.3 channel.

You can use the fast-4.3 channel to upgrade from a previous minor version of OpenShift Container Platform.

stable-4.3 channel

While the fast-4.3 channel contains releases as soon as their errata are published, releases are added to the stable-4.3 channel after a delay of several hours to a day. During this delay, data is collected from Red Hat SRE teams, Red Hat support services, and pre-production and production environments that participate in connected customer program about the stability of the release.

You can use the stable-4.3 channel to upgrade from a previous minor version of OpenShift Container Platform.

Upgrade version paths

OpenShift Container Platform maintains an upgrade recommendation service that understands the version of OpenShift Container Platform you have installed as well as the path to take within the channel you choose to get you to the next release. You can imagine seeing the following in the fast-4.3 channel:

  • 4.3.0

  • 4.3.1

  • 4.3.3

  • 4.3.4

The service recommends only upgrades that have been tested and have no serious issues. If your cluster is on 4.3.1 and OpenShift Container Platform suggests 4.3.4, then it is safe for you to update from .4.3.1 to .4.3.4. Do not rely on consecutive patch numbers. In this example, 4.3.2 is not, and never was, available in the channel. The update service will not suggest updating to a version of OpenShift Container Platform that contains known vulnerabilities.

Update stability depends on your channel. The presence of an update recommendation in the candidate-4.3 channel does not imply that the update is supported. It means that no serious issues have been found with the update yet, but there might not be significant traffic through the update to suggest stability. The presence of an update recommendation in the fast-4.3 or stable-4.3 channels is a declaration that the update is fully supported while it is in the channel. While releases will never be removed from a channel, update recommendations that exhibit serious issues will be removed from all channels. Updates initiated after the update recommendation has been removed might not be supported.

Red Hat will eventually provide supported update paths from any supported release in the fast-4.3 or stable-4.3 channels to the latest release in 4.3.z, although there can be delays while safe paths away from troubled releases are constructed and verified.

Fast and stable channel use and strategies

The fast-4.3 and stable-4.3 channels present a choice between receiving general availability releases as soon as they are available or allowing Red Hat to control the rollout of those updates. If issues are detected during rollout or at a later time, upgrades to that version might be blocked in both the fast-4.3 and stable-4.3 channels, and a new version might be introduced that becomes the new preferred upgrade target.

Customers can improve this process by configuring pre-production systems on the fast-4.3 channel, configuring production systems on the stable-4.3 channel, and participating in Red Hat’s connected customer program. Red Hat uses this program to observe the impact of updates on your specific hardware and software configurations. Future releases might improve or alter the pace at which updates move from the fast-4.3 to the stable-4.3 channel.

Restricted network clusters

If you manage the container images for your OpenShift Container Platform clusters yourself, you must consult the Red Hat errata that is associated with product releases and note any comments that impact upgrades. During upgrade, the user interface might warn you about switching between these versions, so you must ensure that you selected an appropriate version before you bypass those warnings.

Switching between channels

Your cluster is still supported if you change from the stable-4.3 channel to the fast-4.3 channel. Although you can switch to the candidate-4.3 channel at any time, some releases in that channel might be unsupported release candidates. You can switch from the candidate-4.3 channel to the fast-4.3 channel if your current release is a general availability release. You can always switch from the fast-4.3 channel to the stable-4.3 channel, although if the current release was recently promoted to fast-4.3 there can be a delay of up to a day for the release to be promoted to stable-4.3. If you change to a channel that does not include your current release, an alert displays and no updates can be recommended, but you can safely change back to your original channel at any point.

Updating a cluster by using the web console

If updates are available, you can update your cluster from the web console.

You can find information about available OpenShift Container Platform advisories and updates in the errata section of the Customer Portal.

Prerequisites
  • Have access to the web console as a user with admin privileges.

Procedure
  1. From the web console, click Administration > Cluster Settings and review the contents of the Overview tab.

  2. For production clusters, ensure that the CHANNEL is set to the correct channel for your current minor version, such as stable-4.3.

    For production clusters, you must subscribe to a stable-* or fast-* channel.

    • If the UPDATE STATUS is not Updates Available, you cannot upgrade your cluster.

    • The DESIRED VERSION indicates the cluster version that your cluster is running or is updating to.

  3. Click Updates Available, select the highest available version and click Update. The UPDATE STATUS changes to Updating, and you can review the progress of the Operator upgrades on the Cluster Operators tab.

  4. If you are upgrading to this release from OpenShift Container Platform 4.2, you must restart all Pods after the upgrade is complete. You can do this using the following command, which requires the OpenShift CLI (oc):

    $ for I in $(oc get ns -o jsonpath='{range .items[*]} {.metadata.name}{"\n"} {end}'); \
          do oc delete pods --all -n $I; \
          sleep 1; \
          done

    Restarting all Pods is required because the service CA is automatically rotated as of OpenShift Container Platform 4.3.5. The service CA is rotated during the upgrade and a restart is required afterward to ensure that all services are using the new service CA before the previous service CA expires.

    After this one-time manual restart, subsequent upgrades and rotations will ensure restart before the service CA expires without requiring manual intervention.

  5. After the update completes and the Cluster Version Operator refreshes the available updates, check if more updates are available in your current channel.

    • If updates are available, continue to perform updates in the current channel until you can no longer update.

    • If no updates are available, change the CHANNEL to the stable-* or fast-* channel for the next minor version, and update to the version that you want in that channel.

    You might need to perform several intermediate updates until you reach the version that you want.