×

The OpenShift Serverless Operator provides Kourier as the default ingress for Knative. However, you can use Service Mesh with OpenShift Serverless whether Kourier is enabled or not. Integrating with Kourier disabled allows you to configure additional networking and routing options that the Kourier ingress does not support, such as mTLS functionality.

Note the following assumptions and limitations:

  • All Knative internal components, as well as Knative Services, are part of the Service Mesh and have sidecars injection enabled. This means that strict mTLS is enforced within the whole mesh. All requests to Knative Services require an mTLS connection, with the client having to send its certificate, except calls coming from OpenShift Routing.

  • OpenShift Serverless with Service Mesh integration can only target one service mesh. Multiple meshes can be present in the cluster, but OpenShift Serverless is only available on one of them.

  • Changing the target ServiceMeshMemberRoll that OpenShift Serverless is part of, meaning moving OpenShift Serverless to another mesh, is not supported. The only way to change the targeted Service mesh is to uninstall and reinstall OpenShift Serverless.

Prerequisites

  • You have access to an Red Hat OpenShift Serverless account with cluster administrator access.

  • You have installed the OpenShift CLI (oc).

  • You have installed the Serverless Operator.

  • You have installed the Red Hat OpenShift Service Mesh Operator.

  • The examples in the following procedures use the domain example.com. The example certificate for this domain is used as a certificate authority (CA) that signs the subdomain certificate.

    To complete and verify these procedures in your deployment, you need either a certificate signed by a widely trusted public CA or a CA provided by your organization. Example commands must be adjusted according to your domain, subdomain, and CA.

  • You must configure the wildcard certificate to match the domain of your OpenShift Container Platform cluster. For example, if your OpenShift Container Platform console address is https://console-openshift-console.apps.openshift.example.com, you must configure the wildcard certificate so that the domain is *.apps.openshift.example.com. For more information about configuring wildcard certificates, see the following topic about Creating a certificate to encrypt incoming external traffic.

  • If you want to use any domain name, including those which are not subdomains of the default OpenShift Container Platform cluster domain, you must set up domain mapping for those domains. For more information, see the OpenShift Serverless documentation about Creating a custom domain mapping.

OpenShift Serverless only supports the use of Red Hat OpenShift Service Mesh functionality that is explicitly documented in this guide, and does not support other undocumented features.

Using Serverless 1.31 with Service Mesh is only supported with Service Mesh version 2.2 or later. For details and information on versions other than 1.31, see the "Red Hat OpenShift Serverless Supported Configurations" page.

Creating a certificate to encrypt incoming external traffic

By default, the Service Mesh mTLS feature only secures traffic inside of the Service Mesh itself, between the ingress gateway and individual pods that have sidecars. To encrypt traffic as it flows into the OpenShift Container Platform cluster, you must generate a certificate before you enable the OpenShift Serverless and Service Mesh integration.

Prerequisites
  • You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift Service on AWS or OpenShift Dedicated.

  • You have installed the OpenShift Serverless Operator and Knative Serving.

  • Install the OpenShift CLI (oc).

  • You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.

Procedure
  1. Create a root certificate and private key that signs the certificates for your Knative services:

    $ openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 \
        -subj '/O=Example Inc./CN=example.com' \
        -keyout root.key \
        -out root.crt
  2. Create a wildcard certificate:

    $ openssl req -nodes -newkey rsa:2048 \
        -subj "/CN=*.apps.openshift.example.com/O=Example Inc." \
        -keyout wildcard.key \
        -out wildcard.csr
  3. Sign the wildcard certificate:

    $ openssl x509 -req -days 365 -set_serial 0 \
        -CA root.crt \
        -CAkey root.key \
        -in wildcard.csr \
        -out wildcard.crt
  4. Create a secret by using the wildcard certificate:

    $ oc create -n istio-system secret tls wildcard-certs \
        --key=wildcard.key \
        --cert=wildcard.crt

    This certificate is picked up by the gateways created when you integrate OpenShift Serverless with Service Mesh, so that the ingress gateway serves traffic with this certificate.

Integrating Service Mesh with OpenShift Serverless

Verifying installation prerequisites

Before installing and configuring the Service Mesh integration with Serverless, verify that the prerequisites have been met.

Procedure
  1. Check for conflicting gateways:

    Example command
    $ oc get gateway -A -o jsonpath='{range .items[*]}{@.metadata.namespace}{"/"}{@.metadata.name}{" "}{@.spec.servers}{"\n"}{end}' | column -t
    Example output
    knative-serving/knative-ingress-gateway  [{"hosts":["*"],"port":{"name":"https","number":443,"protocol":"HTTPS"},"tls":{"credentialName":"wildcard-certs","mode":"SIMPLE"}}]
    knative-serving/knative-local-gateway    [{"hosts":["*"],"port":{"name":"http","number":8081,"protocol":"HTTP"}}]

    This command should not return a Gateway that binds port: 443 and hosts: ["*"], except the Gateways in knative-serving and Gateways that are part of another Service Mesh instance.

    The mesh that Serverless is part of must be distinct and preferably reserved only for Serverless workloads. That is because additional configuration, such as Gateways, might interfere with the Serverless gateways knative-local-gateway and knative-ingress-gateway. Red Hat OpenShift Service Mesh only allows one Gateway to claim a wildcard host binding (hosts: ["*"]) on the same port (port: 443). If another Gateway is already binding this configuration, a separate mesh has to be created for Serverless workloads.

  2. Check whether Red Hat OpenShift Service Mesh istio-ingressgateway is exposed as type NodePort or LoadBalancer:

    Example command
    $ oc get svc -A | grep istio-ingressgateway
    Example output
    istio-system   istio-ingressgateway  ClusterIP  172.30.46.146 none>   15021/TCP,80/TCP,443/TCP     9m50s

    This command should not return a Service object of type NodePort or LoadBalancer.

    Cluster external Knative Services are expected to be called via OpenShift Ingress using OpenShift Routes. It is not supported to access Service Mesh directly, such as by exposing the istio-ingressgateway using a Service object with type NodePort or LoadBalancer.

Installing and configuring Service Mesh

To integrate Serverless with Service Mesh, you need to install Service Mesh with a specific configuration.

Procedure
  1. Create a ServiceMeshControlPlane resource in the istio-system namespace with the following configuration:

    If you have an existing ServiceMeshControlPlane object, make sure that you have the same configuration applied.

    apiVersion: maistra.io/v2
    kind: ServiceMeshControlPlane
    metadata:
      name: basic
      namespace: istio-system
    spec:
      profiles:
      - default
      security:
        dataPlane:
          mtls: true (1)
      techPreview:
        meshConfig:
          defaultConfig:
            terminationDrainDuration: 35s (2)
      gateways:
        ingress:
          service:
            metadata:
              labels:
                knative: ingressgateway (3)
      proxy:
        networking:
          trafficControl:
            inbound:
              excludedPorts: (4)
              - 8444 # metrics
              - 8022 # serving: wait-for-drain k8s pre-stop hook
    1 Enforce strict mTLS in the mesh. Only calls using a valid client certificate are allowed.
    2 Serverless has a graceful termination for Knative Services of 30 seconds. istio-proxy needs to have a longer termination duration to make sure no requests are dropped.
    3 Define a specific selector for the ingress gateway to target only the Knative gateway.
    4 These ports are called by Kubernetes and cluster monitoring, which are not part of the mesh and cannot be called using mTLS. Therefore, these ports are excluded from the mesh.
  2. Add the namespaces that you would like to integrate with Service Mesh to the ServiceMeshMemberRoll object as members:

    Example servicemesh-member-roll.yaml configuration file
    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
      namespace: istio-system
    spec:
      members: (1)
        - knative-serving
        - knative-eventing
        - your-OpenShift-projects
    1 A list of namespaces to be integrated with Service Mesh.

    This list of namespaces must include the knative-serving and knative-eventing namespaces.

  3. Apply the ServiceMeshMemberRoll resource:

    $ oc apply -f servicemesh-member-roll.yaml
  4. Create the necessary gateways so that Service Mesh can accept traffic. The following example uses the knative-local-gateway object with the ISTIO_MUTUAL mode (mTLS):

    Example istio-knative-gateways.yaml configuration file
    apiVersion: networking.istio.io/v1alpha3
    kind: Gateway
    metadata:
      name: knative-ingress-gateway
      namespace: knative-serving
    spec:
      selector:
        knative: ingressgateway
      servers:
        - port:
            number: 443
            name: https
            protocol: HTTPS
          hosts:
            - "*"
          tls:
            mode: SIMPLE
            credentialName: <wildcard_certs> (1)
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: Gateway
    metadata:
     name: knative-local-gateway
     namespace: knative-serving
    spec:
     selector:
       knative: ingressgateway
     servers:
       - port:
           number: 8081
           name: https
           protocol: HTTPS (2)
         tls:
           mode: ISTIO_MUTUAL (2)
         hosts:
           - "*"
    ---
    apiVersion: v1
    kind: Service
    metadata:
     name: knative-local-gateway
     namespace: istio-system
     labels:
       experimental.istio.io/disable-gateway-port-translation: "true"
    spec:
     type: ClusterIP
     selector:
       istio: ingressgateway
     ports:
       - name: http2
         port: 80
         targetPort: 8081
    1 Name of the secret containing the wildcard certificate.
    2 The knative-local-gateway object serves HTTPS traffic and expects all clients to send requests using mTLS. This means that only traffic coming from within Service Mesh is possible. Workloads from outside the Service Mesh must use the external domain via OpenShift Routing.
  5. Apply the Gateway resources:

    $ oc apply -f istio-knative-gateways.yaml

Installing and configuring Serverless

After installing Service Mesh, you need to install Serverless with a specific configuration.

Procedure
  1. Install Knative Serving with the following KnativeServing custom resource, which enables the Istio integration:

    Example knative-serving-config.yaml configuration file
    apiVersion: operator.knative.dev/v1beta1
    kind: KnativeServing
    metadata:
      name: knative-serving
      namespace: knative-serving
    spec:
      ingress:
        istio:
          enabled: true (1)
      deployments: (2)
      - name: activator
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: autoscaler
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      config:
        istio: (3)
          gateway.knative-serving.knative-ingress-gateway: istio-ingressgateway.<your-istio-namespace>.svc.cluster.local
          local-gateway.knative-serving.knative-local-gateway: knative-local-gateway.<your-istio-namespace>.svc.cluster.local
    1 Enable Istio integration.
    2 Enable sidecar injection for Knative Serving data plane pods.
    3 If your istio is not running in the istio-system namespace, you need to set these two flags with the correct namespace.
  2. Apply the KnativeServing resource:

    $ oc apply -f knative-serving-config.yaml
  3. Install Knative Eventing with the following KnativeEventing object, which enables the Istio integration:

    Example knative-eventing-config.yaml configuration file
    apiVersion: operator.knative.dev/v1beta1
    kind: KnativeEventing
    metadata:
      name: knative-eventing
      namespace: knative-eventing
    spec:
      config:
        features:
          istio: enabled (1)
      workloads: (2)
      - name: pingsource-mt-adapter
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: imc-dispatcher
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: mt-broker-ingress
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: mt-broker-filter
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
    1 Enable Eventing Istio controller to create a DestinationRule for each InMemoryChannel or KafkaChannel service.
    2 Enable sidecar injection for Knative Eventing pods.
  4. Apply the KnativeEventing resource:

    $ oc apply -f knative-eventing-config.yaml
  5. Install Knative Kafka with the following KnativeKafka custom resource, which enables the Istio integration:

    Example knative-kafka-config.yaml configuration file
    apiVersion: operator.serverless.openshift.io/v1alpha1
    kind: KnativeKafka
    metadata:
      name: knative-kafka
      namespace: knative-eventing
    spec:
      channel:
        enabled: true
        bootstrapServers: <bootstrap_servers> (1)
      source:
        enabled: true
      broker:
        enabled: true
        defaultConfig:
          bootstrapServers: <bootstrap_servers> (1)
          numPartitions: <num_partitions>
          replicationFactor: <replication_factor>
        sink:
          enabled: true
      workloads: (2)
      - name: kafka-controller
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: kafka-broker-receiver
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: kafka-broker-dispatcher
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: kafka-channel-receiver
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: kafka-channel-dispatcher
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: kafka-source-dispatcher
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
      - name: kafka-sink-receiver
        annotations:
          "sidecar.istio.io/inject": "true"
          "sidecar.istio.io/rewriteAppHTTPProbers": "true"
    1 The Apache Kafka cluster URL, for example my-cluster-kafka-bootstrap.kafka:9092.
    2 Enable sidecar injection for Knative Kafka pods.
  6. Apply the KnativeEventing object:

    $ oc apply -f knative-kafka-config.yaml
  7. Install ServiceEntry to inform Service Mesh of the communication between KnativeKafka components and an Apache Kafka cluster:

    Example kafka-cluster-serviceentry.yaml configuration file
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: kafka-cluster
      namespace: knative-eventing
    spec:
      hosts: (1)
        - <bootstrap_servers_without_port>
      exportTo:
        - "."
      ports: (2)
        - number: 9092
          name: tcp-plain
          protocol: TCP
        - number: 9093
          name: tcp-tls
          protocol: TCP
        - number: 9094
          name: tcp-sasl-tls
          protocol: TCP
        - number: 9095
          name: tcp-sasl-tls
          protocol: TCP
        - number: 9096
          name: tcp-tls
          protocol: TCP
      location: MESH_EXTERNAL
      resolution: NONE
    1 The list of Apache Kafka cluster hosts, for example my-cluster-kafka-bootstrap.kafka.
    2 Apache Kafka cluster listeners ports.

    The listed ports in spec.ports are example TPC ports. The actual values depend on how the Apache Kafka cluster is configured.

  8. Apply the ServiceEntry resource:

    $ oc apply -f kafka-cluster-serviceentry.yaml

Verifying the integration

After installing Service Mesh and Serverless with Istio enabled, you can verify that the integration works.

Procedure
  1. Create a Knative Service that has sidecar injection enabled and uses a pass-through route:

    Example knative-service.yaml configuration file
    apiVersion: serving.knative.dev/v1
    kind: Service
    metadata:
      name: <service_name>
      namespace: <namespace> (1)
      annotations:
        serving.knative.openshift.io/enablePassthrough: "true" (2)
    spec:
      template:
        metadata:
          annotations:
            sidecar.istio.io/inject: "true" (3)
            sidecar.istio.io/rewriteAppHTTPProbers: "true"
        spec:
          containers:
          - image: <image_url>
    1 A namespace that is part of the service mesh member roll.
    2 Instruct Knative Serving to generate a pass-through enabled route, so that the certificates you have generated are served through the ingress gateway directly.
    3 Inject Service Mesh sidecars into the Knative service pods.

    Always add the annotation from this example to all of your Knative Service to make them work with Service Mesh.

  2. Apply the Service resource:

    $ oc apply -f knative-service.yaml
  3. Access your serverless application by using a secure connection that is now trusted by the CA:

    $ curl --cacert root.crt <service_url>

    For example, run:

    Example command
    $ curl --cacert root.crt https://hello-default.apps.openshift.example.com
    Example output
    Hello Openshift!

Enabling Knative Serving metrics when using Service Mesh with mTLS

If Service Mesh is enabled with mTLS, metrics for Knative Serving are disabled by default, because Service Mesh prevents Prometheus from scraping metrics. This section shows how to enable Knative Serving metrics when using Service Mesh and mTLS.

Prerequisites
  • You have installed the OpenShift Serverless Operator and Knative Serving on your cluster.

  • You have installed Red Hat OpenShift Service Mesh with the mTLS functionality enabled.

  • You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift Service on AWS or OpenShift Dedicated.

  • Install the OpenShift CLI (oc).

  • You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.

Procedure
  1. Specify prometheus as the metrics.backend-destination in the observability spec of the Knative Serving custom resource (CR):

    apiVersion: operator.knative.dev/v1beta1
    kind: KnativeServing
    metadata:
      name: knative-serving
    spec:
      config:
        observability:
          metrics.backend-destination: "prometheus"
    ...

    This step prevents metrics from being disabled by default.

  2. Apply the following network policy to allow traffic from the Prometheus namespace:

    apiVersion: networking.k8s.io/v1
    kind: NetworkPolicy
    metadata:
      name: allow-from-openshift-monitoring-ns
      namespace: knative-serving
    spec:
      ingress:
      - from:
        - namespaceSelector:
            matchLabels:
              name: "openshift-monitoring"
      podSelector: {}
    ...
  3. Modify and reapply the default Service Mesh control plane in the istio-system namespace, so that it includes the following spec:

    ...
    spec:
      proxy:
        networking:
          trafficControl:
            inbound:
              excludedPorts:
              - 8444
    ...

Integrating Service Mesh with OpenShift Serverless when Kourier is enabled

You can use Service Mesh with OpenShift Serverless even if Kourier is already enabled. This procedure might be useful if you have already installed Knative Serving with Kourier enabled, but decide to add a Service Mesh integration later.

Prerequisites
  • You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift Service on AWS or OpenShift Dedicated.

  • You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.

  • Install the OpenShift CLI (oc).

  • Install the OpenShift Serverless Operator and Knative Serving on your cluster.

  • Install Red Hat OpenShift Service Mesh. OpenShift Serverless with Service Mesh and Kourier is supported for use with both Red Hat OpenShift Service Mesh versions 1.x and 2.x.

Procedure
  1. Add the namespaces that you would like to integrate with Service Mesh to the ServiceMeshMemberRoll object as members:

    apiVersion: maistra.io/v1
    kind: ServiceMeshMemberRoll
    metadata:
      name: default
      namespace: istio-system
    spec:
      members:
        - <namespace> (1)
    ...
    1 A list of namespaces to be integrated with Service Mesh.
  2. Apply the ServiceMeshMemberRoll resource:

    $ oc apply -f <filename>
  3. Create a network policy that permits traffic flow from Knative system pods to Knative services:

    1. For each namespace that you want to integrate with Service Mesh, create a NetworkPolicy resource:

      apiVersion: networking.k8s.io/v1
      kind: NetworkPolicy
      metadata:
        name: allow-from-serving-system-namespace
        namespace: <namespace> (1)
      spec:
        ingress:
        - from:
          - namespaceSelector:
              matchLabels:
                knative.openshift.io/part-of: "openshift-serverless"
        podSelector: {}
        policyTypes:
        - Ingress
      ...
      1 Add the namespace that you want to integrate with Service Mesh.

      The knative.openshift.io/part-of: "openshift-serverless" label was added in OpenShift Serverless 1.22.0. If you are using OpenShift Serverless 1.21.1 or earlier, add the knative.openshift.io/part-of label to the knative-serving and knative-serving-ingress namespaces.

      Add the label to the knative-serving namespace:

      $ oc label namespace knative-serving knative.openshift.io/part-of=openshift-serverless

      Add the label to the knative-serving-ingress namespace:

      $ oc label namespace knative-serving-ingress knative.openshift.io/part-of=openshift-serverless
    2. Apply the NetworkPolicy resource:

      $ oc apply -f <filename>

Improving net-istio memory usage by using secret filtering for Service Mesh

By default, the informers implementation for the Kubernetes client-go library fetches all resources of a particular type. This can lead to a substantial overhead when many resources are available, which can cause the Knative net-istio ingress controller to fail on large clusters due to memory leaking. However, a filtering mechanism is available for the Knative net-istio ingress controller, which enables the controller to only fetch Knative related secrets. You can enable this mechanism by adding an annotation to the KnativeServing custom resource (CR).

If you enable secret filtering, all of your secrets need to be labeled with networking.internal.knative.dev/certificate-uid: "<id>". Otherwise, Knative Serving does not detect them, which leads to failures. You must label both new and existing secrets.

Prerequisites
  • You have cluster administrator permissions on OpenShift Container Platform, or you have cluster or dedicated administrator permissions on Red Hat OpenShift Service on AWS or OpenShift Dedicated.

  • You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads.

  • Install Red Hat OpenShift Service Mesh. OpenShift Serverless with Service Mesh only is supported for use with Red Hat OpenShift Service Mesh version 2.0.5 or later.

  • Install the OpenShift Serverless Operator and Knative Serving.

  • Install the OpenShift CLI (oc).

Procedure
  • Add the serverless.openshift.io/enable-secret-informer-filtering annotation to the KnativeServing CR:

    Example KnativeServing CR
    apiVersion: operator.knative.dev/v1beta1
    kind: KnativeServing
    metadata:
      name: knative-serving
      namespace: knative-serving
      annotations:
        serverless.openshift.io/enable-secret-informer-filtering: "true" (1)
    spec:
      ingress:
        istio:
          enabled: true
      deployments:
        - annotations:
            sidecar.istio.io/inject: "true"
            sidecar.istio.io/rewriteAppHTTPProbers: "true"
          name: activator
        - annotations:
            sidecar.istio.io/inject: "true"
            sidecar.istio.io/rewriteAppHTTPProbers: "true"
          name: autoscaler
    1 Adding this annotation injects an environment variable, ENABLE_SECRET_INFORMER_FILTERING_BY_CERT_UID=true, to the net-istio controller pod.

    This annotation is ignored if you set a different value by overriding deployments.