kubeletArguments:
kube-reserved:
- "cpu=200m,memory=512Mi"
system-reserved:
- "cpu=200m,memory=512Mi"
×
Allocating Node Resources
Overview
To provide more reliable scheduling and minimize node resource overcommitment, each node can reserve a portion of its resources for use by all underlying node components (e.g., kubelet, kube-proxy, Docker) and the remaining system components (e.g., sshd, NetworkManager) on the host. Once specified, the scheduler has more information about the resources (e.g., memory, CPU) a node has allocated for pods.
Configuring Nodes for Allocated Resources
Resources reserved for node components are based on two node settings:
| Setting | Description |
|---|---|
|
Resources reserved for node components. Default is none. |
|
Resources reserved for the remaining system components. Default is none. |
You can set these in the kubeletArguments section of the
node
configuration file (the /etc/origin/node/node-config.yaml file by default)
using a set of <resource_type>=<resource_quantity> pairs (e.g.,
cpu=200m,memory=512Mi). Add the section if it does not already exist:
Example 1. Node Allocatable Resources Settings
Currently, the cpu and memory resource types are supported. For cpu,
the resource quantity is specified in units of cores (e.g., 200m, 0.5, 1).
For memory, it is specified in units of bytes (e.g., 200Ki, 50Mi, 5Gi).
See Compute Resources for more details.
If a flag is not set, it defaults to 0. If none of the flags are set, the allocated resource is set to the node’s capacity as it was before the introduction of allocatable resources.
Computing Allocated Resources
An allocated amount of a resource is computed based on the following formula:
[Allocatable] = [Node Capacity] - [kube-reserved] - [system-reserved] - [Hard-Eviction-Thresholds]
|
The withholding of |
If [Allocatable] is negative, it is set to 0.
Viewing Node Allocatable Resources and Capacity
To see a node’s current capacity and allocatable resources, you can run:
$ oc get node/<node_name> -o yaml
...
status:
...
allocatable:
cpu: "4"
memory: 8010948Ki
pods: "110"
capacity:
cpu: "4"
memory: 8010948Ki
pods: "110"
...
System Resources Reported by Node
Starting with OpenShift Container Platform
3.3,
each node reports system resources utilized by the container runtime and kubelet.
To better aid your ability to configure --system-reserved and --kube-reserved,
you can introspect corresponding node’s resource usage using the node summary API,
which is accessible at <master>/api/v1/nodes/<node>/proxy/stats/summary.
For instance, to access the resources from cluster.node22 node, you can run:
$ curl <certificate details> https://<master>/api/v1/nodes/cluster.node22/proxy/stats/summary
{
"node": {
"nodeName": "cluster.node22",
"systemContainers": [
{
"cpu": {
"usageCoreNanoSeconds": 929684480915,
"usageNanoCores": 190998084
},
"memory": {
"rssBytes": 176726016,
"usageBytes": 1397895168,
"workingSetBytes": 1050509312
},
"name": "kubelet"
},
{
"cpu": {
"usageCoreNanoSeconds": 128521955903,
"usageNanoCores": 5928600
},
"memory": {
"rssBytes": 35958784,
"usageBytes": 129671168,
"workingSetBytes": 102416384
},
"name": "runtime"
}
]
}
}
See REST API Overview for more details about certificate details.
Node enforcement
The node is able to limit the total amount of resources that pods may consume based on the configured allocatable value. This feature significantly improves the reliability of the node by preventing pods from starving system services (for example: container runtime, node agent, etc.) for resources. It is strongly encouraged that administrators reserve resources based on the desired node utilization target in order to improve node reliability.
The node enforces resource constraints using a new cgroup hierarchy that enforces quality of service. All pods are launched in a dedicated cgroup hierarchy separate from system daemons.
To configure this ability, the following kubelet arguments are provided.
Example 2. Node Cgroup Settings
kubeletArguments:
cgroups-per-qos:
- "true" (1)
cgroup-driver:
- "systemd" (2)
enforce-node-allocatable:
- "pods" (3)| 1 | Enable or disable the new cgroup hierarchy managed by the node. Any change of this setting requires a full drain of the node. This flag must be true to allow the node to enforce node allocatable. We do not recommend users change this value. |
| 2 | The cgroup driver used by the node when managing cgroup hierarchies. This
value must match the driver associated with the container runtime. Valid values
are systemd and cgroupfs. The default is systemd. |
| 3 | A comma-delimited list of scopes for where the node should enforce node
resource constraints. Valid values are pods, system-reserved, and kube-reserved.
The default is pods. We do not recommend users change this value. |
Optionally, the node can be made to enforce kube-reserved and system-reserved by
specifying those tokens in the enforce-node-allocatable flag. If specified, the
corresponding --kube-reserved-cgroup or --system-reserved-cgroup needs to be provided.
In future releases, the node and container runtime will be packaged in a common cgroup
separate from system.slice. Until that time, we do not recommend users
change the default value of enforce-node-allocatable flag.
Administrators should treat system daemons similar to Guaranteed pods. System daemons can burst within their bounding control groups and this behavior needs to be managed as part of cluster deployments. Enforcing system-reserved limits can lead to critical system services being CPU starved or OOM killed on the node. The recommendation is to enforce system-reserved only if operators have profiled their nodes exhaustively to determine precise estimates and are confident in their ability to recover if any process in that group is OOM killed.
As a result, we strongly recommended that users only enforce node allocatable for
pods by default, and set aside appropriate reservations for system daemons to maintain
overall node reliability.
Eviction Thresholds
If a node is under memory pressure, it can impact the entire node and all pods running on it. If a system daemon is using more than its reserved amount of memory, an OOM event may occur that can impact the entire node and all pods running on it. To avoid (or reduce the probability of) system OOMs the node provides Out Of Resource Handling.
By reserving some memory via the --eviction-hard flag, the node attempts to evict
pods whenever memory availability on the node drops below the absolute value or percentage.
If system daemons did not exist on a node, pods are limited to the memory
capacity - eviction-hard. For this reason, resources set aside as a buffer for eviction
before reaching out of memory conditions are not available for pods.
Here is an example to illustrate the impact of node allocatable for memory:
-
Node capacity is
32Gi -
--kube-reserved is
2Gi -
--system-reserved is
1Gi -
--eviction-hard is set to
<100Mi.
For this node, the effective node allocatable value is 28.9Gi. If the node
and system components use up all their reservation, the memory available for pods is 28.9Gi,
and kubelet will evict pods when it exceeds this usage.
If we enforce node allocatable (28.9Gi) via top level cgroups, then pods can never exceed 28.9Gi.
Evictions would not be performed unless system daemons are consuming more than 3.1Gi of memory.
If system daemons do not use up all their reservation, with the above example,
pods would face memcg OOM kills from their bounding cgroup before node evictions kick in.
To better enforce QoS under this situation, the node applies the hard eviction thresholds to
the top-level cgroup for all pods to be Node Allocatable + Eviction Hard Thresholds.
If system daemons do not use up all their reservation, the node will evict pods whenever
they consume more than 28.9Gi of memory. If eviction does not occur in time, a pod
will be OOM killed if pods consume 29Gi of memory.