Integrating with CI systems | Integrating | Red Hat Advanced Cluster Security for Kubernetes 3.66

Configuring build policies
- Checking existing build-phase policies
- Creating a new system policy
Configuring registry integration
- Checking for existing registry integration
Configuring access
Integrating with your CI pipeline
- Using Jenkins
- Using CircleCI

Red Hat Advanced Cluster Security for Kubernetes (RHACS) integrates with a variety of continuous integration (CI) products and allows you to apply build-time and deploy-time security rules before you deploy images.

Red Hat Advanced Cluster Security for Kubernetes integrates into CI pipelines after images are built and pushed to a registry. Pushing the image first allows developers to continue testing their artifacts while dealing with any policy violations alongside any other CI test failures, linter violations, or other problems.

If possible, you should configure the version control system to block pull or merge requests from being merged if the build stage, which includes Red Hat Advanced Cluster Security for Kubernetes checks, fails.

The integration with your CI product functions by contacting your Red Hat Advanced Cluster Security for Kubernetes installation to check whether the image complies with build-phase policies you have configured. If there are policy violations, a detailed message is displayed on the console log, including the policy description, rationale, and remediation instructions. Each policy includes an optional enforcement setting; if you mark a policy for build-phase enforcement, failure of that policy causes the client to exit with a nonzero error code.

To integrate Red Hat Advanced Cluster Security for Kubernetes with your CI system, follow these steps:

Configure build policies.
Configure a registry integration.
Configure access to your Red Hat Advanced Cluster Security for Kubernetes instance.
Integrate with your CI pipeline.

Configuring build policies

To check Red Hat Advanced Cluster Security for Kubernetes policies during builds, you must first configure policies that apply to the build phase of the container lifecycle. And then you must integrate with the registry that images are pushed to during the build.

Checking existing build-phase policies

Use the RHACS portal to check any existing build-phase policies that you have configured in Red Hat Advanced Cluster Security for Kubernetes.

Procedure

On the RHACS portal, navigate to Platform Configuration → System Policies.
Use global search to search for Lifecycle Stage:Build.

Creating a new system policy

In addition to using the default policies, you can also create custom policies in Red Hat Advanced Cluster Security for Kubernetes.

Procedure

On the RHACS portal, navigate to Platform Configuration → System Policies.
Click + New Policy.
Enter the Name for the policy.
Select a Severity level for the policy: Critical, High, Medium, or Low.
Choose the Lifecycle Stages for which the policy is applicable, from Build, Deploy, or Runtime. You can select more than one stage.

If you create a new policy for integrating with a CI system, select Build as the lifecycle stage.
- Build-time policies apply to image fields such as CVEs and Dockerfile instructions.
- Deploy-time policies can include all build-time policy criteria. They can also have data from your cluster configurations, such as running in privileged mode or mounting the Docker daemon socket.
- Runtime policies can include all build-time and deploy-time policy criteria, as well as data about process executions during runtime.
Enter information about the policy in the Description, Rationale, and Remediation fields. When CI validates the build, the data from these fields is displayed. Therefore, include all information explaining the policy.
Select a category from the Categories drop-down menu.

Select a notifier from the Notifications drop-down menu that receives alert notifications when a violation occurs for this policy.

You must integrate Red Hat Advanced Cluster Security for Kubernetes with your notification providers, such as webhooks, Jira, or PagerDuty, to receive alert notifications. Notifiers only show up if you have integrated any notification providers with Red Hat Advanced Cluster Security for Kubernetes.

Use Restrict to Scope to enable this policy only for a specific cluster, namespace, or label. You can add multiple scopes and also use regular expressions in RE2 Syntax for namespaces and labels.
Use Exclude by Scope to exclude deployments, clusters, namespaces, and labels. This field indicates that the policy will not apply to the entities that you specify. You can add multiple scopes and also use regular expressions in RE2 Syntax for namespaces and labels. However, you cannot use regular expressions for selecting deployments.

For Excluded Images (Build Lifecycle only), select all the images from the list for which you do not want to trigger a violation for the policy.

The Excluded Images (Build Lifecycle only) setting only applies when you check images in a continuous integration system (the Build lifecycle stage). It does not have any effect if you use this policy to check running deployments (the Deploy lifecycle stage) or runtime activities (the Runtime lifecycle stage).

In the Policy Criteria section, configure the attributes that will trigger the policy.
Select Next on the panel header.
The new policy panel shows a preview of the violations that are triggered if you enable the policy.
Select Next on the panel header.

Choose the enforcement behavior for the policy. Enforcement settings are only available for the stages that you selected for the Lifecycle Stages option. Select ON to enforce policy and report a violation. Select OFF to only report a violation.

The enforcement behavior is different for each lifecycle stage.

For the Build stage, Red Hat Advanced Cluster Security for Kubernetes fails your CI builds when images match the conditions of the policy.
For the Deploy stage, Red Hat Advanced Cluster Security for Kubernetes blocks the creation of deployments that match the conditions of the policy. In clusters with admission controller enforcement, the Kubernetes or OpenShift Container Platform API server blocks all noncompliant deployments. In other clusters, Red Hat Advanced Cluster Security for Kubernetes edits noncompliant deployments to prevent pods from being scheduled.
For the Runtime stage, Red Hat Advanced Cluster Security for Kubernetes stops all pods that match the conditions of the policy.

Policy enforcement can impact running applications or development processes. Before you enable enforcement options, inform all stakeholders and plan how to respond to the automated enforcement actions.

Configuring registry integration

To scan images, you must provide Red Hat Advanced Cluster Security for Kubernetes with access to the image registry you are using in your build pipeline.

Checking for existing registry integration

You can use the RHACS portal to check if you have already integrated with a registry.

Procedure

On the RHACS portal, navigate to Platform Configuration → Integrations.
Under the Image Integration section, look for highlighted Registry tiles. The tiles also list the number of items already configured for that tile.

If none of the Registry tiles are highlighted, you must first integrate with an image registry.

Additional resources

Integrating with image registries

Configuring access

Red Hat Advanced Cluster Security for Kubernetes provides a command-line interface (CLI) roxctl to make it easy to integrate Red Hat Advanced Cluster Security for Kubernetes policies into your build pipeline. The roxctl CLI prints detailed information about problems and how to fix them so that developers can maintain high standards in the early phases of the container lifecycle.

To securely authenticate to the Red Hat Advanced Cluster Security for Kubernetes API server, you must create an API token.

Authenticating using the roxctl CLI

For authentication, you can use an authentication token or your administrator password. Red Hat recommends using an authentication token in a production environment because each token is assigned specific access control permissions.

Use the following steps to generate an authentication token.

Procedure

Navigate to the RHACS portal.
Go to Platform Configuration → Integrations.
Scroll down to the Authentication Tokens category, and click API Token.
Click Generate Token.
Enter a name for the token and select a role that provides the required level of access (for example, Continuous Integration or Sensor Creator).
Click Generate.

Copy the generated token and securely store it. You will not be able to view it again.

After you have generated the authentication token, export it as ROX_API_TOKEN variable:

$ export ROX_API_TOKEN=<api_token>

You can also save the token in a file and use it with the --token-file option. For example:

$ roxctl central debug dump --token-file <token_file>

You cannot use both the -password (-p) and the --token-file options simultaneously.
If you have already set ROX_API_TOKEN variable, and specify the --token-file option, the roxctl CLI uses the specified token file for authentication.
If you have already set ROX_API_TOKEN variable, and specify the --password option, the roxctl CLI uses the specified password for authentication.

Installing the roxctl CLI by downloading the binary

You can install the roxctl CLI to interact with Red Hat Advanced Cluster Security for Kubernetes from a command-line interface. You can install roxctl on Linux, Windows, or macOS.

Installing the roxctl CLI on Linux

You can install the roxctl CLI binary on Linux by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.66.1/bin/Linux/roxctl

Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:

To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

Installing the roxctl CLI on macOS

You can install the roxctl CLI binary on macOS by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.66.1/bin/Darwin/roxctl

Remove all extended attributes from the binary:
```
$ xattr -c roxctl
```
Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:

To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

Installing the roxctl CLI on Windows

You can install the roxctl CLI binary on Windows by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.66.1/bin/Windows/roxctl.exe

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

Running the roxctl CLI from a container

The roxctl client is the default entry point in Red Hat Advanced Cluster Security for Kubernetes roxctl image. To run the roxctl client in a container image:

Procedure

Pull the latest container image for the roxctl CLI.

$ docker pull registry.redhat.io/rh-acs/roxctl:3.66.1

After you install the CLI, you can run it by using the following command:

$ docker run -e ROX_API_TOKEN=$ROX_API_TOKEN \
  -it registry.redhat.io/rh-acs/roxctl:3.66.1 \
  -e $ROX_CENTRAL_ADDRESS <command>

Verification

Verify the roxctl version you have installed.

$ docker run -it registry.redhat.io/rh-acs/roxctl:3.66.1 version

Integrating with your CI pipeline

After you have finished these procedures, the next step is to integrate with your CI pipeline.

Each CI system might require a slightly different configuration.

Using Jenkins

Use the StackRox Container Image Scanner Jenkins plugin for integrating with Jenkins. You can use this plugin in both Jenkins freestyle projects and pipelines.

Using CircleCI

You can integrate Red Hat Advanced Cluster Security for Kubernetes with CircleCI.

Prerequisetes

You have a token with read and write permissions for the Image resource.
You have a username and password for your Docker Hub account.

Procedure

Log in to CircleCI and open an existing project or create a new project.
Click Project Settings.
Click Environment variables.
Click Add variable and create the following three environment variables:
- Name: STACKROX_CENTRAL_HOST - The DNS name or IP address of Central.
- Name: ROX_API_TOKEN - The API token to access Red Hat Advanced Cluster Security for Kubernetes.
- Name: DOCKERHUB_PASSWORD - The password for your Docker Hub account.
- Name: DOCKERHUB_USER - The username for your Docker Hub account.
Create a directory called .circleci in the root directory of your local code repository for your selected project, if you do not already have a CircleCI configuration file.

Create a config.yml configuration file with the following lines in the .circleci directory:

version: 2
jobs:
  check-policy-compliance:
    docker:
      - image: 'circleci/node:latest'
        auth:
          username: $DOCKERHUB_USER
          password: $DOCKERHUB_PASSWORD
    steps:
      - checkout
      - run:
          name: Install roxctl
          command: |
              curl -H "Authorization: Bearer $ROX_API_TOKEN" https://$STACKROX_CENTRAL_HOST:443/api/cli/download/roxctl-linux -o roxctl && chmod +x ./roxctl
      - run:
          name: Scan images for policy deviations and vulnerabilities
          command: |
              ./roxctl image check --endpoint "$STACKROX_CENTRAL_HOST:443" --image "<your_registry/repo/image_name>" (1)
      - run:
          name: Scan deployment files for policy deviations
          command: |
              ./roxctl image check --endpoint "$STACKROX_CENTRAL_HOST:443" --image "<your_deployment_file>" (2)
              # Important note: This step assumes the YAML file you'd like to test is located in the project.
workflows:
  version: 2
  build_and_test:
    jobs:
      - check-policy-compliance

1	Replace `<your_registry/repo/image_name>` with your registry and image path.
2	Replace `<your_deployment_file>` with the path to your deployment file.

If you already have a config.yml file for CircleCI in your repository, add a new jobs section with the specified details in your existing configuration file.

After you commit the configuration file to your repository, navigate to the Jobs queue in your CircleCI dashboard to verify the build policy enforcement.