apiVersion: serving.knative.dev/v1
kind: Service
metadata:
name: event-display
spec:
template:
spec:
containers:
- image: quay.io/openshift-knative/knative-eventing-sources-event-display:latest
If you need to ingress events from an event producer that is not included in Knative, or from a producer that emits events which are not in the CloudEvent
format, you can do this by creating a custom event source. You can create a custom event source by using one of the following methods:
Use a PodSpecable
object as an event source, by creating a sink binding.
Use a container as an event source, by creating a container source.
The SinkBinding
object supports decoupling event production from delivery addressing. Sink binding is used to connect event producers to an event consumer, or sink. An event producer is a Kubernetes resource that embeds a PodSpec
template and produces events. A sink is an addressable Kubernetes object that can receive events.
The SinkBinding
object injects environment variables into the PodTemplateSpec
of the sink, which means that the application code does not need to interact directly with the Kubernetes API to locate the event destination. These environment variables are as follows:
K_SINK
The URL of the resolved sink.
K_CE_OVERRIDES
A JSON object that specifies overrides to the outbound event.
The |
Creating Knative resources by using YAML files uses a declarative API, which enables you to describe event sources declaratively and in a reproducible manner. To create a sink binding by using YAML, you must create a YAML file that defines an SinkBinding
object, then apply it by using the oc apply
command.
The OpenShift Serverless Operator, Knative Serving and Knative Eventing are installed on the cluster.
Install the OpenShift CLI (oc
).
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads in OpenShift Container Platform.
To check that sink binding is set up correctly, create a Knative event display service, or event sink, that dumps incoming messages to its log.
Create a service YAML file:
apiVersion: serving.knative.dev/v1
kind: Service
metadata:
name: event-display
spec:
template:
spec:
containers:
- image: quay.io/openshift-knative/knative-eventing-sources-event-display:latest
Create the service:
$ oc apply -f <filename>
Create a sink binding instance that directs events to the service.
Create a sink binding YAML file:
apiVersion: sources.knative.dev/v1alpha1
kind: SinkBinding
metadata:
name: bind-heartbeat
spec:
subject:
apiVersion: batch/v1
kind: Job (1)
selector:
matchLabels:
app: heartbeat-cron
sink:
ref:
apiVersion: serving.knative.dev/v1
kind: Service
name: event-display
1 | In this example, any Job with the label app: heartbeat-cron will be bound to the event sink. |
Create the sink binding:
$ oc apply -f <filename>
Create a CronJob
object.
Create a cron job YAML file:
apiVersion: batch/v1
kind: CronJob
metadata:
name: heartbeat-cron
spec:
# Run every minute
schedule: "* * * * *"
jobTemplate:
metadata:
labels:
app: heartbeat-cron
bindings.knative.dev/include: "true"
spec:
template:
spec:
restartPolicy: Never
containers:
- name: single-heartbeat
image: quay.io/openshift-knative/heartbeats:latest
args:
- --period=1
env:
- name: ONE_SHOT
value: "true"
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
To use sink binding, you must manually add a For example, to add this label to a
|
Create the cron job:
$ oc apply -f <filename>
Check that the controller is mapped correctly by entering the following command and inspecting the output:
$ oc get sinkbindings.sources.knative.dev bind-heartbeat -oyaml
spec:
sink:
ref:
apiVersion: serving.knative.dev/v1
kind: Service
name: event-display
namespace: default
subject:
apiVersion: batch/v1
kind: Job
namespace: default
selector:
matchLabels:
app: heartbeat-cron
You can verify that the Kubernetes events were sent to the Knative event sink by looking at the message dumper function logs.
Enter the command:
$ oc get pods
Enter the command:
$ oc logs $(oc get pod -o name | grep event-display) -c user-container
☁️ cloudevents.Event
Validation: valid
Context Attributes,
specversion: 1.0
type: dev.knative.eventing.samples.heartbeat
source: https://knative.dev/eventing-contrib/cmd/heartbeats/#event-test/mypod
id: 2b72d7bf-c38f-4a98-a433-608fbcdd2596
time: 2019-10-18T15:23:20.809775386Z
contenttype: application/json
Extensions,
beats: true
heart: yes
the: 42
Data,
{
"id": 1,
"label": ""
}
You can use the kn source binding create
command to create a sink binding by using the Knative (kn
) CLI. Using the Knative CLI to create event sources provides a more streamlined and intuitive user interface than modifying YAML files directly.
The OpenShift Serverless Operator, Knative Serving and Knative Eventing are installed on the cluster.
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads in OpenShift Container Platform.
Install the Knative (kn
) CLI.
Install the OpenShift CLI (oc
).
The following procedure requires you to create YAML files. If you change the names of the YAML files from those used in the examples, you must ensure that you also update the corresponding CLI commands. |
To check that sink binding is set up correctly, create a Knative event display service, or event sink, that dumps incoming messages to its log:
$ kn service create event-display --image quay.io/openshift-knative/knative-eventing-sources-event-display:latest
Create a sink binding instance that directs events to the service:
$ kn source binding create bind-heartbeat --subject Job:batch/v1:app=heartbeat-cron --sink ksvc:event-display
Create a CronJob
object.
Create a cron job YAML file:
apiVersion: batch/v1
kind: CronJob
metadata:
name: heartbeat-cron
spec:
# Run every minute
schedule: "* * * * *"
jobTemplate:
metadata:
labels:
app: heartbeat-cron
bindings.knative.dev/include: "true"
spec:
template:
spec:
restartPolicy: Never
containers:
- name: single-heartbeat
image: quay.io/openshift-knative/heartbeats:latest
args:
- --period=1
env:
- name: ONE_SHOT
value: "true"
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
To use sink binding, you must manually add a For example, to add this label to a
|
Create the cron job:
$ oc apply -f <filename>
Check that the controller is mapped correctly by entering the following command and inspecting the output:
$ kn source binding describe bind-heartbeat
Name: bind-heartbeat
Namespace: demo-2
Annotations: sources.knative.dev/creator=minikube-user, sources.knative.dev/lastModifier=minikub ...
Age: 2m
Subject:
Resource: job (batch/v1)
Selector:
app: heartbeat-cron
Sink:
Name: event-display
Resource: Service (serving.knative.dev/v1)
Conditions:
OK TYPE AGE REASON
++ Ready 2m
You can verify that the Kubernetes events were sent to the Knative event sink by looking at the message dumper function logs.
View the message dumper function logs by entering the following commands:
$ oc get pods
$ oc logs $(oc get pod -o name | grep event-display) -c user-container
☁️ cloudevents.Event
Validation: valid
Context Attributes,
specversion: 1.0
type: dev.knative.eventing.samples.heartbeat
source: https://knative.dev/eventing-contrib/cmd/heartbeats/#event-test/mypod
id: 2b72d7bf-c38f-4a98-a433-608fbcdd2596
time: 2019-10-18T15:23:20.809775386Z
contenttype: application/json
Extensions,
beats: true
heart: yes
the: 42
Data,
{
"id": 1,
"label": ""
}
When you create an event source by using the Knative (kn
) CLI, you can specify a sink where events are sent to from that resource by using the --sink
flag. The sink can be any addressable or callable resource that can receive incoming events from other resources.
The following example creates a sink binding that uses a service, http://event-display.svc.cluster.local
, as the sink:
$ kn source binding create bind-heartbeat \
--namespace sinkbinding-example \
--subject "Job:batch/v1:app=heartbeat-cron" \
--sink http://event-display.svc.cluster.local \ (1)
--ce-override "sink=bound"
1 | svc in http://event-display.svc.cluster.local determines that the sink is a Knative service. Other default sink prefixes include channel , and broker . |
After Knative Eventing is installed on your cluster, you can create a sink binding by using the web console. Using the OpenShift Container Platform web console provides a streamlined and intuitive user interface to create an event source.
You have logged in to the OpenShift Container Platform web console.
The OpenShift Serverless Operator, Knative Serving, and Knative Eventing are installed on your OpenShift Container Platform cluster.
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads in OpenShift Container Platform.
Create a Knative service to use as a sink:
In the Developer perspective, navigate to +Add → YAML.
Copy the example YAML:
apiVersion: serving.knative.dev/v1
kind: Service
metadata:
name: event-display
spec:
template:
spec:
containers:
- image: quay.io/openshift-knative/knative-eventing-sources-event-display:latest
Click Create.
Create a CronJob
resource that is used as an event source and sends an event every minute.
In the Developer perspective, navigate to +Add → YAML.
Copy the example YAML:
apiVersion: batch/v1
kind: CronJob
metadata:
name: heartbeat-cron
spec:
# Run every minute
schedule: "*/1 * * * *"
jobTemplate:
metadata:
labels:
app: heartbeat-cron
bindings.knative.dev/include: true (1)
spec:
template:
spec:
restartPolicy: Never
containers:
- name: single-heartbeat
image: quay.io/openshift-knative/heartbeats
args:
- --period=1
env:
- name: ONE_SHOT
value: "true"
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
1 | Ensure that you include the bindings.knative.dev/include: true label. The default namespace selection behavior of OpenShift Serverless uses inclusion mode. |
Click Create.
Create a sink binding in the same namespace as the service created in the previous step, or any other sink that you want to send events to.
In the Developer perspective, navigate to +Add → Event Source. The Event Sources page is displayed.
Optional: If you have multiple providers for your event sources, select the required provider from the Providers list to filter the available event sources from the provider.
Select Sink Binding and then click Create Event Source. The Create Event Source page is displayed.
You can configure the Sink Binding settings by using the Form view or YAML view and can switch between the views. The data is persisted when switching between the views. |
In the apiVersion field enter batch/v1
.
In the Kind field enter Job
.
The |
Select a Sink. This can be either a Resource or a URI. In this example, the event-display
service created in the previous step is used as the Resource sink.
In the Match labels section:
Enter app
in the Name field.
Enter heartbeat-cron
in the Value field.
The label selector is required when using cron jobs with sink binding, rather than the resource name. This is because jobs created by a cron job do not have a predictable name, and contain a randomly generated string in their name. For example, |
Click Create.
You can verify that the sink binding, sink, and cron job have been created and are working correctly by viewing the Topology page and pod logs.
In the Developer perspective, navigate to Topology.
View the sink binding, sink, and heartbeats cron job.
Observe that successful jobs are being registered by the cron job once the sink binding is added. This means that the sink binding is successfully reconfiguring the jobs created by the cron job.
Browse the logs of the event-display
service pod to see events produced by the heartbeats cron job.
You can use a PodSpecable
object as an event source by creating a sink binding. You can configure multiple parameters when creating a SinkBinding
object.
SinkBinding
objects support the following parameters:
Field | Description | Required or optional |
---|---|---|
|
Specifies the API version, for example |
Required |
|
Identifies this resource object as a |
Required |
|
Specifies metadata that uniquely identifies the |
Required |
|
Specifies the configuration information for this |
Required |
|
A reference to an object that resolves to a URI to use as the sink. |
Required |
|
References the resources for which the runtime contract is augmented by binding implementations. |
Required |
|
Defines overrides to control the output format and modifications to the event sent to the sink. |
Optional |
The Subject
parameter references the resources for which the runtime contract is augmented by binding implementations. You can configure multiple fields for a Subject
definition.
The Subject
definition supports the following fields:
Field | Description | Required or optional |
---|---|---|
|
API version of the referent. |
Required |
|
Kind of the referent. |
Required |
|
Namespace of the referent. If omitted, this defaults to the namespace of the object. |
Optional |
|
Name of the referent. |
Do not use if you configure |
|
Selector of the referents. |
Do not use if you configure |
|
A list of label selector requirements. |
Only use one of either |
|
The label key that the selector applies to. |
Required if using |
|
Represents a key’s relationship to a set of values. Valid operators are |
Required if using |
|
An array of string values. If the |
Required if using |
|
A map of key-value pairs. Each key-value pair in the |
Only use one of either |
Given the following YAML, the Deployment
object named mysubject
in the default
namespace is selected:
apiVersion: sources.knative.dev/v1
kind: SinkBinding
metadata:
name: bind-heartbeat
spec:
subject:
apiVersion: apps/v1
kind: Deployment
namespace: default
name: mysubject
...
Given the following YAML, any Job
object with the label working=example
in the default
namespace is selected:
apiVersion: sources.knative.dev/v1
kind: SinkBinding
metadata:
name: bind-heartbeat
spec:
subject:
apiVersion: batch/v1
kind: Job
namespace: default
selector:
matchLabels:
working: example
...
Given the following YAML, any Pod
object with the label working=example
or working=sample
in the default
namespace is selected:
apiVersion: sources.knative.dev/v1
kind: SinkBinding
metadata:
name: bind-heartbeat
spec:
subject:
apiVersion: v1
kind: Pod
namespace: default
selector:
- matchExpression:
key: working
operator: In
values:
- example
- sample
...
A ceOverrides
definition provides overrides that control the CloudEvent’s output format and modifications sent to the sink. You can configure multiple fields for the ceOverrides
definition.
A ceOverrides
definition supports the following fields:
Field | Description | Required or optional |
---|---|---|
|
Specifies which attributes are added or overridden on the outbound event. Each |
Optional |
Only valid |
apiVersion: sources.knative.dev/v1
kind: SinkBinding
metadata:
name: bind-heartbeat
spec:
...
ceOverrides:
extensions:
extra: this is an extra attribute
additional: 42
This sets the K_CE_OVERRIDES
environment variable on the subject
:
{ "extensions": { "extra": "this is an extra attribute", "additional": "42" } }
To use a sink binding, you need to do assign the bindings.knative.dev/include: "true"
label to either the resource or the namespace that the resource is included in. If the resource definition does not include the label, a cluster administrator can attach it to the namespace by running:
$ oc label namespace <namespace> bindings.knative.dev/include=true
Container sources create a container image that generates events and sends events to a sink. You can use a container source to create a custom event source, by creating a container image and a ContainerSource
object that uses your image URI.
Two environment variables are injected by the container source controller: K_SINK
and K_CE_OVERRIDES
. These variables are resolved from the sink
and ceOverrides
spec, respectively. Events are sent to the sink URI specified in the K_SINK
environment variable. The message must be sent as a POST
using the CloudEvent
HTTP format.
The following is an example of a heartbeats container image:
package main
import (
"context"
"encoding/json"
"flag"
"fmt"
"log"
"os"
"strconv"
"time"
duckv1 "knative.dev/pkg/apis/duck/v1"
cloudevents "github.com/cloudevents/sdk-go/v2"
"github.com/kelseyhightower/envconfig"
)
type Heartbeat struct {
Sequence int `json:"id"`
Label string `json:"label"`
}
var (
eventSource string
eventType string
sink string
label string
periodStr string
)
func init() {
flag.StringVar(&eventSource, "eventSource", "", "the event-source (CloudEvents)")
flag.StringVar(&eventType, "eventType", "dev.knative.eventing.samples.heartbeat", "the event-type (CloudEvents)")
flag.StringVar(&sink, "sink", "", "the host url to heartbeat to")
flag.StringVar(&label, "label", "", "a special label")
flag.StringVar(&periodStr, "period", "5", "the number of seconds between heartbeats")
}
type envConfig struct {
// Sink URL where to send heartbeat cloud events
Sink string `envconfig:"K_SINK"`
// CEOverrides are the CloudEvents overrides to be applied to the outbound event.
CEOverrides string `envconfig:"K_CE_OVERRIDES"`
// Name of this pod.
Name string `envconfig:"POD_NAME" required:"true"`
// Namespace this pod exists in.
Namespace string `envconfig:"POD_NAMESPACE" required:"true"`
// Whether to run continuously or exit.
OneShot bool `envconfig:"ONE_SHOT" default:"false"`
}
func main() {
flag.Parse()
var env envConfig
if err := envconfig.Process("", &env); err != nil {
log.Printf("[ERROR] Failed to process env var: %s", err)
os.Exit(1)
}
if env.Sink != "" {
sink = env.Sink
}
var ceOverrides *duckv1.CloudEventOverrides
if len(env.CEOverrides) > 0 {
overrides := duckv1.CloudEventOverrides{}
err := json.Unmarshal([]byte(env.CEOverrides), &overrides)
if err != nil {
log.Printf("[ERROR] Unparseable CloudEvents overrides %s: %v", env.CEOverrides, err)
os.Exit(1)
}
ceOverrides = &overrides
}
p, err := cloudevents.NewHTTP(cloudevents.WithTarget(sink))
if err != nil {
log.Fatalf("failed to create http protocol: %s", err.Error())
}
c, err := cloudevents.NewClient(p, cloudevents.WithUUIDs(), cloudevents.WithTimeNow())
if err != nil {
log.Fatalf("failed to create client: %s", err.Error())
}
var period time.Duration
if p, err := strconv.Atoi(periodStr); err != nil {
period = time.Duration(5) * time.Second
} else {
period = time.Duration(p) * time.Second
}
if eventSource == "" {
eventSource = fmt.Sprintf("https://knative.dev/eventing-contrib/cmd/heartbeats/#%s/%s", env.Namespace, env.Name)
log.Printf("Heartbeats Source: %s", eventSource)
}
if len(label) > 0 && label[0] == '"' {
label, _ = strconv.Unquote(label)
}
hb := &Heartbeat{
Sequence: 0,
Label: label,
}
ticker := time.NewTicker(period)
for {
hb.Sequence++
event := cloudevents.NewEvent("1.0")
event.SetType(eventType)
event.SetSource(eventSource)
event.SetExtension("the", 42)
event.SetExtension("heart", "yes")
event.SetExtension("beats", true)
if ceOverrides != nil && ceOverrides.Extensions != nil {
for n, v := range ceOverrides.Extensions {
event.SetExtension(n, v)
}
}
if err := event.SetData(cloudevents.ApplicationJSON, hb); err != nil {
log.Printf("failed to set cloudevents data: %s", err.Error())
}
log.Printf("sending cloudevent to %s", sink)
if res := c.Send(context.Background(), event); !cloudevents.IsACK(res) {
log.Printf("failed to send cloudevent: %v", res)
}
if env.OneShot {
return
}
// Wait for next tick
<-ticker.C
}
}
The following is an example of a container source that references the previous heartbeats container image:
apiVersion: sources.knative.dev/v1
kind: ContainerSource
metadata:
name: test-heartbeats
spec:
template:
spec:
containers:
# This corresponds to a heartbeats image URI that you have built and published
- image: gcr.io/knative-releases/knative.dev/eventing/cmd/heartbeats
name: heartbeats
args:
- --period=1
env:
- name: POD_NAME
value: "example-pod"
- name: POD_NAMESPACE
value: "event-test"
sink:
ref:
apiVersion: serving.knative.dev/v1
kind: Service
name: example-service
...
You can use the kn source container
commands to create and manage container sources by using the Knative (kn
) CLI. Using the Knative CLI to create event sources provides a more streamlined and intuitive user interface than modifying YAML files directly.
$ kn source container create <container_source_name> --image <image_uri> --sink <sink>
$ kn source container delete <container_source_name>
$ kn source container describe <container_source_name>
$ kn source container list
$ kn source container list -o yaml
This command updates the image URI for an existing container source:
$ kn source container update <container_source_name> --image <image_uri>
After Knative Eventing is installed on your cluster, you can create a container source by using the web console. Using the OpenShift Container Platform web console provides a streamlined and intuitive user interface to create an event source.
You have logged in to the OpenShift Container Platform web console.
The OpenShift Serverless Operator, Knative Serving, and Knative Eventing are installed on your OpenShift Container Platform cluster.
You have created a project or have access to a project with the appropriate roles and permissions to create applications and other workloads in OpenShift Container Platform.
In the Developer perspective, navigate to +Add → Event Source. The Event Sources page is displayed.
Select Container Source and then click Create Event Source. The Create Event Source page is displayed.
Configure the Container Source settings by using the Form view or YAML view:
You can switch between the Form view and YAML view. The data is persisted when switching between the views. |
In the Image field, enter the URI of the image that you want to run in the container created by the container source.
In the Name field, enter the name of the image.
Optional: In the Arguments field, enter any arguments to be passed to the container.
Optional: In the Environment variables field, add any environment variables to set in the container.
In the Sink section, add a sink where events from the container source are routed to. If you are using the Form view, you can choose from the following options:
Select Resource to use a channel, broker, or service as a sink for the event source.
Select URI to specify where the events from the container source are routed to.
After you have finished configuring the container source, click Create.
You can use a container as an event source, by creating a ContainerSource
object. You can configure multiple parameters when creating a ContainerSource
object.
ContainerSource
objects support the following fields:
Field | Description | Required or optional |
---|---|---|
|
Specifies the API version, for example |
Required |
|
Identifies this resource object as a |
Required |
|
Specifies metadata that uniquely identifies the |
Required |
|
Specifies the configuration information for this |
Required |
|
A reference to an object that resolves to a URI to use as the sink. |
Required |
|
A |
Required |
|
Defines overrides to control the output format and modifications to the event sent to the sink. |
Optional |
apiVersion: sources.knative.dev/v1
kind: ContainerSource
metadata:
name: test-heartbeats
spec:
template:
spec:
containers:
- image: quay.io/openshift-knative/heartbeats:latest
name: heartbeats
args:
- --period=1
env:
- name: POD_NAME
value: "mypod"
- name: POD_NAMESPACE
value: "event-test"
...
A ceOverrides
definition provides overrides that control the CloudEvent’s output format and modifications sent to the sink. You can configure multiple fields for the ceOverrides
definition.
A ceOverrides
definition supports the following fields:
Field | Description | Required or optional |
---|---|---|
|
Specifies which attributes are added or overridden on the outbound event. Each |
Optional |
Only valid |
apiVersion: sources.knative.dev/v1
kind: ContainerSource
metadata:
name: test-heartbeats
spec:
...
ceOverrides:
extensions:
extra: this is an extra attribute
additional: 42
This sets the K_CE_OVERRIDES
environment variable on the subject
:
{ "extensions": { "extra": "this is an extra attribute", "additional": "42" } }