Soon, all Red Hat OpenShift documentation will only be available on docs.redhat.com, the official location of all Red Hat product documentation. Get familiar with the updated experience today!
  1. Documentation
    2. history
×

Configuring PXE booting for virtual machines

PXE booting, or network booting, is available in OpenShift Virtualization. Network booting allows a computer to boot and load an operating system or other program without requiring a locally attached storage device. For example, you can use it to choose your desired OS image from a PXE server when deploying a new host.

Prerequisites

  • A Linux bridge must be connected.

  • The PXE server must be connected to the same VLAN as the bridge.

PXE booting with a specified MAC address

As an administrator, you can boot a client over the network by first creating a NetworkAttachmentDefinition object for your PXE network. Then, reference the network attachment definition in your virtual machine instance configuration file before you start the virtual machine instance. You can also specify a MAC address in the virtual machine instance configuration file, if required by the PXE server.

Prerequisites

  • A Linux bridge must be connected.

  • The PXE server must be connected to the same VLAN as the bridge.

Procedure

  1. Configure a PXE network on the cluster:

    1. Create the network attachment definition file for PXE network pxe-net-conf:

      apiVersion: "k8s.cni.cncf.io/v1"
kind: NetworkAttachmentDefinition
metadata:
  name: pxe-net-conf
spec:
  config: '{
    "cniVersion": "0.3.1",
    "name": "pxe-net-conf",
    "plugins": [
      {
        "type": "cnv-bridge",
        "bridge": "br1",
        "vlan": 1 (1)
      },
      {
        "type": "cnv-tuning" (2)
      }
    ]
  }'
      1 Optional: The VLAN tag.
      2 The cnv-tuning plug-in provides support for custom MAC addresses.

      The virtual machine instance will be attached to the bridge br1 through an access port with the requested VLAN.

  2. Create the network attachment definition by using the file you created in the previous step:

    $ oc create -f pxe-net-conf.yaml

  3. Edit the virtual machine instance configuration file to include the details of the interface and network.

    1. Specify the network and MAC address, if required by the PXE server. If the MAC address is not specified, a value is assigned automatically. However, note that at this time, MAC addresses assigned automatically are not persistent.

      Ensure that bootOrder is set to 1 so that the interface boots first. In this example, the interface is connected to a network called <pxe-net>:

      interfaces:
- masquerade: {}
  name: default
- bridge: {}
  name: pxe-net
  macAddress: de:00:00:00:00:de
  bootOrder: 1

      Boot order is global for interfaces and disks.

    2. Assign a boot device number to the disk to ensure proper booting after operating system provisioning.

      Set the disk bootOrder value to 2:

      devices:
  disks:
  - disk:
      bus: virtio
    name: containerdisk
    bootOrder: 2

    3. Specify that the network is connected to the previously created network attachment definition. In this scenario, <pxe-net> is connected to the network attachment definition called <pxe-net-conf>:

      networks:
- name: default
  pod: {}
- name: pxe-net
  multus:
    networkName: pxe-net-conf

  4. Create the virtual machine instance:

    $ oc create -f vmi-pxe-boot.yaml
Example output
  virtualmachineinstance.kubevirt.io "vmi-pxe-boot" created

  1. Wait for the virtual machine instance to run:

    $ oc get vmi vmi-pxe-boot -o yaml | grep -i phase
  phase: Running

  2. View the virtual machine instance using VNC:

    $ virtctl vnc vmi-pxe-boot

  3. Watch the boot screen to verify that the PXE boot is successful.

  4. Log in to the virtual machine instance:

    $ virtctl console vmi-pxe-boot

  5. Verify the interfaces and MAC address on the virtual machine and that the interface connected to the bridge has the specified MAC address. In this case, we used eth1 for the PXE boot, without an IP address. The other interface, eth0, got an IP address from OpenShift Container Platform.

    $ ip addr
Example output
...
3. eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
   link/ether de:00:00:00:00:de brd ff:ff:ff:ff:ff:ff

Template: Virtual machine instance configuration file for PXE booting

apiVersion: kubevirt.io/v1alpha3
kind: VirtualMachineInstance
metadata:
  creationTimestamp: null
  labels:
    special: vmi-pxe-boot
  name: vmi-pxe-boot
spec:
  domain:
    devices:
      disks:
      - disk:
          bus: virtio
        name: containerdisk
        bootOrder: 2
      - disk:
          bus: virtio
        name: cloudinitdisk
      interfaces:
      - masquerade: {}
        name: default
      - bridge: {}
        name: pxe-net
        macAddress: de:00:00:00:00:de
        bootOrder: 1
    machine:
      type: ""
    resources:
      requests:
        memory: 1024M
  networks:
  - name: default
    pod: {}
  - multus:
      networkName: pxe-net-conf
    name: pxe-net
  terminationGracePeriodSeconds: 0
  volumes:
  - name: containerdisk
    containerDisk:
      image: kubevirt/fedora-cloud-container-disk-demo
  - cloudInitNoCloud:
      userData: |
        #!/bin/bash
        echo "fedora" | passwd fedora --stdin
    name: cloudinitdisk
status: {}

OpenShift Virtualization networking glossary

OpenShift Virtualization provides advanced networking functionality by using custom resources and plug-ins.

The following terms are used throughout OpenShift Virtualization documentation:

Container Network Interface (CNI)

a Cloud Native Computing Foundation project, focused on container network connectivity. OpenShift Virtualization uses CNI plug-ins to build upon the basic Kubernetes networking functionality.

Multus

a "meta" CNI plug-in that allows multiple CNIs to exist so that a pod or virtual machine can use the interfaces it needs.

Custom resource definition (CRD)

a Kubernetes API resource that allows you to define custom resources, or an object defined by using the CRD API resource.

Network attachment definition

a CRD introduced by the Multus project that allows you to attach pods, virtual machines, and virtual machine instances to one or more networks.

Preboot eXecution Environment (PXE)

an interface that enables an administrator to boot a client machine from a server over the network. Network booting allows you to remotely load operating systems and other software onto the client.