×

A projected volume maps several existing volume sources into the same directory.

The following types of volume sources can be projected:

  • Secrets

  • Config Maps

  • Downward API

All sources are required to be in the same namespace as the pod.

Understanding projected volumes

Projected volumes can map any combination of these volume sources into a single directory, allowing the user to:

  • automatically populate a single volume with the keys from multiple secrets, config maps, and with downward API information, so that I can synthesize a single directory with various sources of information;

  • populate a single volume with the keys from multiple secrets, config maps, and with downward API information, explicitly specifying paths for each item, so that I can have full control over the contents of that volume.

The following general scenarios show how you can use projected volumes.

Config map, secrets, Downward API.

Projected volumes allow you to deploy containers with configuration data that includes passwords. An application using these resources could be deploying Red Hat OpenStack Platform (RHOSP) on Kubernetes. The configuration data might have to be assembled differently depending on if the services are going to be used for production or for testing. If a pod is labeled with production or testing, the downward API selector metadata.labels can be used to produce the correct RHOSP configs.

Config map + secrets.

Projected volumes allow you to deploy containers involving configuration data and passwords. For example, you might execute a config map with some sensitive encrypted tasks that are decrypted using a vault password file.

ConfigMap + Downward API.

Projected volumes allow you to generate a config including the pod name (available via the metadata.name selector). This application can then pass the pod name along with requests in order to easily determine the source without using IP tracking.

Secrets + Downward API.

Projected volumes allow you to use a secret as a public key to encrypt the namespace of the pod (available via the metadata.namespace selector). This example allows the Operator to use the application to deliver the namespace information securely without using an encrypted transport.

Example Pod specs

The following are examples of Pod specs for creating projected volumes.

Pod with a secret, a Downward API, and a config map
apiVersion: v1
kind: Pod
metadata:
  name: volume-test
spec:
  containers:
  - name: container-test
    image: busybox
    volumeMounts: (1)
    - name: all-in-one
      mountPath: "/projected-volume"(2)
      readOnly: true (3)
  volumes: (4)
  - name: all-in-one (5)
    projected:
      defaultMode: 0400 (6)
      sources:
      - secret:
          name: mysecret (7)
          items:
            - key: username
              path: my-group/my-username (8)
      - downwardAPI: (9)
          items:
            - path: "labels"
              fieldRef:
                fieldPath: metadata.labels
            - path: "cpu_limit"
              resourceFieldRef:
                containerName: container-test
                resource: limits.cpu
      - configMap: (10)
          name: myconfigmap
          items:
            - key: config
              path: my-group/my-config
              mode: 0777 (11)
1 Add a volumeMounts section for each container that needs the secret.
2 Specify a path to an unused directory where the secret will appear.
3 Set readOnly to true.
4 Add a volumes block to list each projected volume source.
5 Specify any name for the volume.
6 Set the execute permission on the files.
7 Add a secret. Enter the name of the secret object. Each secret you want to use must be listed.
8 Specify the path to the secrets file under the mountPath. Here, the secrets file is in /projected-volume/my-group/my-username.
9 Add a Downward API source.
10 Add a ConfigMap source.
11 Set the mode for the specific projection

If there are multiple containers in the pod, each container needs a volumeMounts section, but only one volumes section is needed.

Pod with multiple secrets with a non-default permission mode set
apiVersion: v1
kind: Pod
metadata:
  name: volume-test
spec:
  containers:
  - name: container-test
    image: busybox
    volumeMounts:
    - name: all-in-one
      mountPath: "/projected-volume"
      readOnly: true
  volumes:
  - name: all-in-one
    projected:
      defaultMode: 0755
      sources:
      - secret:
          name: mysecret
          items:
            - key: username
              path: my-group/my-username
      - secret:
          name: mysecret2
          items:
            - key: password
              path: my-group/my-password
              mode: 511

The defaultMode can only be specified at the projected level and not for each volume source. However, as illustrated above, you can explicitly set the mode for each individual projection.

Pathing Considerations

Collisions Between Keys when Configured Paths are Identical

If you configure any keys with the same path, the pod spec will not be accepted as valid. In the following example, the specified path for mysecret and myconfigmap are the same:

apiVersion: v1
kind: Pod
metadata:
  name: volume-test
spec:
  containers:
  - name: container-test
    image: busybox
    volumeMounts:
    - name: all-in-one
      mountPath: "/projected-volume"
      readOnly: true
  volumes:
  - name: all-in-one
    projected:
      sources:
      - secret:
          name: mysecret
          items:
            - key: username
              path: my-group/data
      - configMap:
          name: myconfigmap
          items:
            - key: config
              path: my-group/data

Consider the following situations related to the volume file paths.

Collisions Between Keys without Configured Paths

The only run-time validation that can occur is when all the paths are known at pod creation, similar to the above scenario. Otherwise, when a conflict occurs the most recent specified resource will overwrite anything preceding it (this is true for resources that are updated after pod creation as well).

Collisions when One Path is Explicit and the Other is Automatically Projected

In the event that there is a collision due to a user specified path matching data that is automatically projected, the latter resource will overwrite anything preceding it as before

Configuring a Projected Volume for a Pod

When creating projected volumes, consider the volume file path situations described in Understanding projected volumes.

The following example shows how to use a projected volume to mount an existing secret volume source. The steps can be used to create a user name and password secrets from local files. You then create a pod that runs one container, using a projected volume to mount the secrets into the same shared directory.

Procedure

To use a projected volume to mount an existing secret volume source.

  1. Create files containing the secrets, entering the following, replacing the password and user information as appropriate:

    apiVersion: v1
    kind: Secret
    metadata:
      name: mysecret
    type: Opaque
    data:
      pass: MWYyZDFlMmU2N2Rm
      user: YWRtaW4=

    The user and pass values can be any valid string that is base64 encoded.

    The following example shows admin in base64:

    $ echo -n "admin" | base64
    Example output
    YWRtaW4=

    The following example shows the password 1f2d1e2e67df in base64:.

    $ echo -n "1f2d1e2e67df" | base64
    Example output
    MWYyZDFlMmU2N2Rm
  2. Use the following command to create the secrets:

    $ oc create -f <secrets-filename>

    For example:

    $ oc create -f secret.yaml
    Example output
    secret "mysecret" created
  3. You can check that the secret was created using the following commands:

    $ oc get secret <secret-name>

    For example:

    $ oc get secret mysecret
    Example output
    NAME       TYPE      DATA      AGE
    mysecret   Opaque    2         17h
    $ oc get secret <secret-name> -o yaml

    For example:

    $ oc get secret mysecret -o yaml
    apiVersion: v1
    data:
      pass: MWYyZDFlMmU2N2Rm
      user: YWRtaW4=
    kind: Secret
    metadata:
      creationTimestamp: 2017-05-30T20:21:38Z
      name: mysecret
      namespace: default
      resourceVersion: "2107"
      selfLink: /api/v1/namespaces/default/secrets/mysecret
      uid: 959e0424-4575-11e7-9f97-fa163e4bd54c
    type: Opaque
  4. Create a pod configuration file similar to the following that includes a volumes section:

    apiVersion: v1
    kind: Pod
    metadata:
      name: test-projected-volume
    spec:
      containers:
      - name: test-projected-volume
        image: busybox
        args:
        - sleep
        - "86400"
        volumeMounts:
        - name: all-in-one
          mountPath: "/projected-volume"
          readOnly: true
      volumes:
      - name: all-in-one
        projected:
          sources:
          - secret:      (1)
              name: user
          - secret:      (1)
              name: pass
    1 The name of the secret you created.
  5. Create the pod from the configuration file:

    $ oc create -f <your_yaml_file>.yaml

    For example:

    $ oc create -f secret-pod.yaml
    Example output
    pod "test-projected-volume" created
  6. Verify that the pod container is running, and then watch for changes to the pod:

    $ oc get pod <name>

    For example:

    $ oc get pod test-projected-volume

    The output should appear similar to the following:

    Example output
    NAME                    READY     STATUS    RESTARTS   AGE
    test-projected-volume   1/1       Running   0          14s
  7. In another terminal, use the oc exec command to open a shell to the running container:

    $ oc exec -it <pod> <command>

    For example:

    $ oc exec -it test-projected-volume -- /bin/sh
  8. In your shell, verify that the projected-volumes directory contains your projected sources:

    / # ls
    Example output
    bin               home              root              tmp
    dev               proc              run               usr
    etc               projected-volume  sys               var