×

In OpenShift Container Platform version 4.5, you can install a cluster on Amazon Web Services (AWS) using infrastructure that you provide and an internal mirror of the installation release content.

While you can install an OpenShift Container Platform cluster by using mirrored installation release content, your cluster still requires Internet access to use the AWS APIs.

One way to create this infrastructure is to use the provided CloudFormation templates. You can modify the templates to customize your infrastructure or use the information that they contain to create AWS objects according to your company’s policies.

The steps for performing a user-provisioned infrastructure installation are provided as an example only. Installing a cluster with infrastructure you provide requires knowledge of the cloud provider and the installation process of OpenShift Container Platform. Several CloudFormation templates are provided to assist in completing these steps or to help model your own. You are also free to create the required resources through other methods; the templates are just an example.

Prerequisites

About installations in restricted networks

In OpenShift Container Platform 4.5, you can perform an installation that does not require an active connection to the Internet to obtain software components. Restricted network installations can be completed using installer-provisioned infrastructure or user-provisioned infrastructure, depending on the cloud platform to which you are installing the cluster.

If you choose to perform a restricted network installation on a cloud platform, you still require access to its cloud APIs. Some cloud functions, like Amazon Web Service’s IAM service, require Internet access, so you might still require Internet access. Depending on your network, you might require less Internet access for an installation on bare metal hardware or on VMware vSphere.

To complete a restricted network installation, you must create a registry that mirrors the contents of the OpenShift Container Platform registry and contains the installation media. You can create this registry on a mirror host, which can access both the Internet and your closed network, or by using other methods that meet your restrictions.

Because of the complexity of the configuration for user-provisioned installations, consider completing a standard user-provisioned infrastructure installation before you attempt a restricted network installation using user-provisioned infrastructure. Completing this test installation might make it easier to isolate and troubleshoot any issues that might arise during your installation in a restricted network.

Additional limits

Clusters in restricted networks have the following additional limitations and restrictions:

  • The ClusterVersion status includes an Unable to retrieve available updates error.

  • By default, you cannot use the contents of the Developer Catalog because you cannot access the required image stream tags.

Internet and Telemetry access for OpenShift Container Platform

In OpenShift Container Platform 4.5, you require access to the Internet to obtain the images that are necessary to install your cluster. The Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, also requires Internet access. If your cluster is connected to the Internet, Telemetry runs automatically, and your cluster is registered to the Red Hat OpenShift Cluster Manager (OCM).

Once you confirm that your Red Hat OpenShift Cluster Manager inventory is correct, either maintained automatically by Telemetry or manually using OCM, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.

You must have Internet access to:

  • Access the Red Hat OpenShift Cluster Manager page to download the installation program and perform subscription management. If the cluster has Internet access and you do not disable Telemetry, that service automatically entitles your cluster.

  • Access Quay.io to obtain the packages that are required to install your cluster.

  • Obtain the packages that are required to perform cluster updates.

If your cluster cannot have direct Internet access, you can perform a restricted network installation on some types of infrastructure that you provision. During that process, you download the content that is required and use it to populate a mirror registry with the packages that you need to install a cluster and generate the installation program. With some installation types, the environment that you install your cluster in will not require Internet access. Before you update the cluster, you update the content of the mirror registry.

Required AWS infrastructure components

To install OpenShift Container Platform on user-provisioned infrastructure in Amazon Web Services (AWS), you must manually create both the machines and their supporting infrastructure.

For more information about the integration testing for different platforms, see the OpenShift Container Platform 4.x Tested Integrations page.

You can use the provided Cloud Formation templates to create this infrastructure, you can manually create the components, or you can reuse existing infrastructure that meets the cluster requirements. Review the Cloud Formation templates for more details about how the components interrelate.

Cluster machines

You need AWS::EC2::Instance objects for the following machines:

  • A bootstrap machine. This machine is required during installation, but you can remove it after your cluster deploys.

  • Three control plane machines. The control plane machines are not governed by a machine set.

  • Compute machines. You must create at least two compute machines, which are also known as worker machines, during installation. These machines are not governed by a machine set.

You can use the following instance types for the cluster machines with the provided Cloud Formation templates.

If m4 instance types are not available in your region, such as with eu-west-3, use m5 types instead.

Table 1. Instance types for machines
Instance type Bootstrap Control plane Compute

i3.large

x

m4.large or m5.large

x

m4.xlarge or m5.xlarge

x

x

m4.2xlarge

x

x

m4.4xlarge

x

x

m4.8xlarge

x

x

m4.10xlarge

x

x

m4.16xlarge

x

x

c4.large

x

c4.xlarge

x

c4.2xlarge

x

x

c4.4xlarge

x

x

c4.8xlarge

x

x

r4.large

x

r4.xlarge

x

x

r4.2xlarge

x

x

r4.4xlarge

x

x

r4.8xlarge

x

x

r4.16xlarge

x

x

You might be able to use other instance types that meet the specifications of these instance types.

Certificate signing requests management

Because your cluster has limited access to automatic machine management when you use infrastructure that you provision, you must provide a mechanism for approving cluster certificate signing requests (CSRs) after installation. The kube-controller-manager only approves the kubelet client CSRs. The machine-approver cannot guarantee the validity of a serving certificate that is requested by using kubelet credentials because it cannot confirm that the correct machine issued the request. You must determine and implement a method of verifying the validity of the kubelet serving certificate requests and approving them.

Other infrastructure components

  • A VPC

  • DNS entries

  • Load balancers (classic or network) and listeners

  • A public and a private Route 53 zone

  • Security groups

  • IAM roles

  • S3 buckets

If you are working in a disconnected environment, you are unable to reach the public IP addresses for EC2 and ELB endpoints. To resolve this, you must create a VPC endpoint and attach it to the subnet that the clusters are using. The endpoints should be named as follows:

  • ec2.<region>.amazonaws.com

  • elasticloadbalancing.<region>.amazonaws.com

  • s3.<region>.amazonaws.com

Required VPC components

You must provide a suitable VPC and subnets that allow communication to your machines.

Component AWS type Description

VPC

  • AWS::EC2::VPC

  • AWS::EC2::VPCEndpoint

You must provide a public VPC for the cluster to use. The VPC uses an endpoint that references the route tables for each subnet to improve communication with the registry that is hosted in S3.

Public subnets

  • AWS::EC2::Subnet

  • AWS::EC2::SubnetNetworkAclAssociation

Your VPC must have public subnets for between 1 and 3 availability zones and associate them with appropriate Ingress rules.

Internet gateway

  • AWS::EC2::InternetGateway

  • AWS::EC2::VPCGatewayAttachment

  • AWS::EC2::RouteTable

  • AWS::EC2::Route

  • AWS::EC2::SubnetRouteTableAssociation

  • AWS::EC2::NatGateway

  • AWS::EC2::EIP

You must have a public Internet gateway, with public routes, attached to the VPC. In the provided templates, each public subnet has a NAT gateway with an EIP address. These NAT gateways allow cluster resources, like private subnet instances, to reach the Internet and are not required for some restricted network or proxy scenarios.

Network access control

  • AWS::EC2::NetworkAcl

  • AWS::EC2::NetworkAclEntry

You must allow the VPC to access the following ports:

Port

Reason

80

Inbound HTTP traffic

443

Inbound HTTPS traffic

22

Inbound SSH traffic

1024 - 65535

Inbound ephemeral traffic

0 - 65535

Outbound ephemeral traffic

Private subnets

  • AWS::EC2::Subnet

  • AWS::EC2::RouteTable

  • AWS::EC2::SubnetRouteTableAssociation

Your VPC can have private subnets. The provided CloudFormation templates can create private subnets for between 1 and 3 availability zones. If you use private subnets, you must provide appropriate routes and tables for them.

Required DNS and load balancing components

Your DNS and load balancer configuration needs to use a public hosted zone and can use a private hosted zone similar to the one that the installation program uses if it provisions the cluster’s infrastructure. You must create a DNS entry that resolves to your load balancer. An entry for api.<cluster_name>.<domain> must point to the external load balancer, and an entry for api-int.<cluster_name>.<domain> must point to the internal load balancer.

The cluster also requires load balancers and listeners for port 6443, which are required for the Kubernetes API and its extensions, and port 22623, which are required for the Ignition config files for new machines. The targets will be the master nodes. Port 6443 must be accessible to both clients external to the cluster and nodes within the cluster. Port 22623 must be accessible to nodes within the cluster.

Component AWS type Description

DNS

AWS::Route53::HostedZone

The hosted zone for your internal DNS.

etcd record sets

AWS::Route53::RecordSet

The registration records for etcd for your control plane machines.

Public load balancer

AWS::ElasticLoadBalancingV2::LoadBalancer

The load balancer for your public subnets.

External API server record

AWS::Route53::RecordSetGroup

Alias records for the external API server.

External listener

AWS::ElasticLoadBalancingV2::Listener

A listener on port 6443 for the external load balancer.

External target group

AWS::ElasticLoadBalancingV2::TargetGroup

The target group for the external load balancer.

Private load balancer

AWS::ElasticLoadBalancingV2::LoadBalancer

The load balancer for your private subnets.

Internal API server record

AWS::Route53::RecordSetGroup

Alias records for the internal API server.

Internal listener

AWS::ElasticLoadBalancingV2::Listener

A listener on port 22623 for the internal load balancer.

Internal target group

AWS::ElasticLoadBalancingV2::TargetGroup

The target group for the internal load balancer.

Internal listener

AWS::ElasticLoadBalancingV2::Listener

A listener on port 6443 for the internal load balancer.

Internal target group

AWS::ElasticLoadBalancingV2::TargetGroup

The target group for the internal load balancer.

Security groups

The control plane and worker machines require access to the following ports:

Group Type IP Protocol Port range

MasterSecurityGroup

AWS::EC2::SecurityGroup

icmp

0

tcp

22

tcp

6443

tcp

22623

WorkerSecurityGroup

AWS::EC2::SecurityGroup

icmp

0

tcp

22

BootstrapSecurityGroup

AWS::EC2::SecurityGroup

tcp

22

tcp

19531

Control plane Ingress

The control plane machines require the following Ingress groups. Each Ingress group is a AWS::EC2::SecurityGroupIngress resource.

Ingress group Description IP protocol Port range

MasterIngressEtcd

etcd

tcp

2379- 2380

MasterIngressVxlan

Vxlan packets

udp

4789

MasterIngressWorkerVxlan

Vxlan packets

udp

4789

MasterIngressInternal

Internal cluster communication and Kubernetes proxy metrics

tcp

9000 - 9999

MasterIngressWorkerInternal

Internal cluster communication

tcp

9000 - 9999

MasterIngressKube

Kubernetes kubelet, scheduler and controller manager

tcp

10250 - 10259

MasterIngressWorkerKube

Kubernetes kubelet, scheduler and controller manager

tcp

10250 - 10259

MasterIngressIngressServices

Kubernetes Ingress services

tcp

30000 - 32767

MasterIngressWorkerIngressServices

Kubernetes Ingress services

tcp

30000 - 32767

Worker Ingress

The worker machines require the following Ingress groups. Each Ingress group is a AWS::EC2::SecurityGroupIngress resource.

Ingress group Description IP protocol Port range

WorkerIngressVxlan

Vxlan packets

udp

4789

WorkerIngressWorkerVxlan

Vxlan packets

udp

4789

WorkerIngressInternal

Internal cluster communication

tcp

9000 - 9999

WorkerIngressWorkerInternal

Internal cluster communication

tcp

9000 - 9999

WorkerIngressKube

Kubernetes kubelet, scheduler, and controller manager

tcp

10250

WorkerIngressWorkerKube

Kubernetes kubelet, scheduler, and controller manager

tcp

10250

WorkerIngressIngressServices

Kubernetes Ingress services

tcp

30000 - 32767

WorkerIngressWorkerIngressServices

Kubernetes Ingress services

tcp

30000 - 32767

Roles and instance profiles

You must grant the machines permissions in AWS. The provided CloudFormation templates grant the machines permission the following AWS::IAM::Role objects and provide a AWS::IAM::InstanceProfile for each set of roles. If you do not use the templates, you can grant the machines the following broad permissions or the following individual permissions.

Role Effect Action Resource

Master

Allow

ec2:*

*

Allow

elasticloadbalancing:*

*

Allow

iam:PassRole

*

Allow

s3:GetObject

*

Worker

Allow

ec2:Describe*

*

Bootstrap

Allow

ec2:Describe*

*

Allow

ec2:AttachVolume

*

Allow

ec2:DetachVolume

*

Required AWS permissions

When you attach the AdministratorAccess policy to the IAM user that you create in Amazon Web Services (AWS), you grant that user all of the required permissions. To deploy all components of an OpenShift Container Platform cluster, the IAM user requires the following permissions:

Required EC2 permissions for installation
  • tag:TagResources

  • tag:UntagResources

  • ec2:AllocateAddress

  • ec2:AssociateAddress

  • ec2:AuthorizeSecurityGroupEgress

  • ec2:AuthorizeSecurityGroupIngress

  • ec2:CopyImage

  • ec2:CreateNetworkInterface

  • ec2:AttachNetworkInterface

  • ec2:CreateSecurityGroup

  • ec2:CreateTags

  • ec2:CreateVolume

  • ec2:DeleteSecurityGroup

  • ec2:DeleteSnapshot

  • ec2:DeleteTags

  • ec2:DeregisterImage

  • ec2:DescribeAccountAttributes

  • ec2:DescribeAddresses

  • ec2:DescribeAvailabilityZones

  • ec2:DescribeDhcpOptions

  • ec2:DescribeImages

  • ec2:DescribeInstanceAttribute

  • ec2:DescribeInstanceCreditSpecifications

  • ec2:DescribeInstances

  • ec2:DescribeInternetGateways

  • ec2:DescribeKeyPairs

  • ec2:DescribeNatGateways

  • ec2:DescribeNetworkAcls

  • ec2:DescribeNetworkInterfaces

  • ec2:DescribePrefixLists

  • ec2:DescribeRegions

  • ec2:DescribeRouteTables

  • ec2:DescribeSecurityGroups

  • ec2:DescribeSubnets

  • ec2:DescribeTags

  • ec2:DescribeVolumes

  • ec2:DescribeVpcAttribute

  • ec2:DescribeVpcClassicLink

  • ec2:DescribeVpcClassicLinkDnsSupport

  • ec2:DescribeVpcEndpoints

  • ec2:DescribeVpcs

  • ec2:GetEbsDefaultKmsKeyId

  • ec2:ModifyInstanceAttribute

  • ec2:ModifyNetworkInterfaceAttribute

  • ec2:ReleaseAddress

  • ec2:RevokeSecurityGroupEgress

  • ec2:RevokeSecurityGroupIngress

  • ec2:RunInstances

  • ec2:TerminateInstances

Required permissions for creating network resources during installation
  • ec2:AssociateDhcpOptions

  • ec2:AssociateRouteTable

  • ec2:AttachInternetGateway

  • ec2:CreateDhcpOptions

  • ec2:CreateInternetGateway

  • ec2:CreateNatGateway

  • ec2:CreateRoute

  • ec2:CreateRouteTable

  • ec2:CreateSubnet

  • ec2:CreateVpc

  • ec2:CreateVpcEndpoint

  • ec2:ModifySubnetAttribute

  • ec2:ModifyVpcAttribute

If you use an existing VPC, your account does not require these permissions for creating network resources.

Required Elastic Load Balancing permissions for installation
  • elasticloadbalancing:AddTags

  • elasticloadbalancing:ApplySecurityGroupsToLoadBalancer

  • elasticloadbalancing:AttachLoadBalancerToSubnets

  • elasticloadbalancing:ConfigureHealthCheck

  • elasticloadbalancing:CreateListener

  • elasticloadbalancing:CreateLoadBalancer

  • elasticloadbalancing:CreateLoadBalancerListeners

  • elasticloadbalancing:CreateTargetGroup

  • elasticloadbalancing:DeleteLoadBalancer

  • elasticloadbalancing:DeregisterInstancesFromLoadBalancer

  • elasticloadbalancing:DeregisterTargets

  • elasticloadbalancing:DescribeInstanceHealth

  • elasticloadbalancing:DescribeListeners

  • elasticloadbalancing:DescribeLoadBalancerAttributes

  • elasticloadbalancing:DescribeLoadBalancers

  • elasticloadbalancing:DescribeTags

  • elasticloadbalancing:DescribeTargetGroupAttributes

  • elasticloadbalancing:DescribeTargetHealth

  • elasticloadbalancing:ModifyLoadBalancerAttributes

  • elasticloadbalancing:ModifyTargetGroup

  • elasticloadbalancing:ModifyTargetGroupAttributes

  • elasticloadbalancing:RegisterInstancesWithLoadBalancer

  • elasticloadbalancing:RegisterTargets

  • elasticloadbalancing:SetLoadBalancerPoliciesOfListener

Required IAM permissions for installation
  • iam:AddRoleToInstanceProfile

  • iam:CreateInstanceProfile

  • iam:CreateRole

  • iam:DeleteInstanceProfile

  • iam:DeleteRole

  • iam:DeleteRolePolicy

  • iam:GetInstanceProfile

  • iam:GetRole

  • iam:GetRolePolicy

  • iam:GetUser

  • iam:ListInstanceProfilesForRole

  • iam:ListRoles

  • iam:ListUsers

  • iam:PassRole

  • iam:PutRolePolicy

  • iam:RemoveRoleFromInstanceProfile

  • iam:SimulatePrincipalPolicy

  • iam:TagRole

If you have not created an elastic load balancer (ELB) in your AWS account, the IAM user also requires the iam:CreateServiceLinkedRole permission.

Required Route 53 permissions for installation
  • route53:ChangeResourceRecordSets

  • route53:ChangeTagsForResource

  • route53:CreateHostedZone

  • route53:DeleteHostedZone

  • route53:GetChange

  • route53:GetHostedZone

  • route53:ListHostedZones

  • route53:ListHostedZonesByName

  • route53:ListResourceRecordSets

  • route53:ListTagsForResource

  • route53:UpdateHostedZoneComment

Required S3 permissions for installation
  • s3:CreateBucket

  • s3:DeleteBucket

  • s3:GetAccelerateConfiguration

  • s3:GetBucketAcl

  • s3:GetBucketCors

  • s3:GetBucketLocation

  • s3:GetBucketLogging

  • s3:GetBucketObjectLockConfiguration

  • s3:GetBucketReplication

  • s3:GetBucketRequestPayment

  • s3:GetBucketTagging

  • s3:GetBucketVersioning

  • s3:GetBucketWebsite

  • s3:GetEncryptionConfiguration

  • s3:GetLifecycleConfiguration

  • s3:GetReplicationConfiguration

  • s3:ListBucket

  • s3:PutBucketAcl

  • s3:PutBucketTagging

  • s3:PutEncryptionConfiguration

S3 permissions that cluster Operators require
  • s3:DeleteObject

  • s3:GetObject

  • s3:GetObjectAcl

  • s3:GetObjectTagging

  • s3:GetObjectVersion

  • s3:PutObject

  • s3:PutObjectAcl

  • s3:PutObjectTagging

Required permissions to delete base cluster resources
  • autoscaling:DescribeAutoScalingGroups

  • ec2:DeleteNetworkInterface

  • ec2:DeleteVolume

  • elasticloadbalancing:DeleteTargetGroup

  • elasticloadbalancing:DescribeTargetGroups

  • iam:DeleteAccessKey

  • iam:DeleteUser

  • iam:ListInstanceProfiles

  • iam:ListRolePolicies

  • iam:ListUserPolicies

  • s3:DeleteObject

  • s3:ListBucketVersions

  • tag:GetResources

Required permissions to delete network resources
  • ec2:DeleteDhcpOptions

  • ec2:DeleteInternetGateway

  • ec2:DeleteNatGateway

  • ec2:DeleteRoute

  • ec2:DeleteRouteTable

  • ec2:DeleteSubnet

  • ec2:DeleteVpc

  • ec2:DeleteVpcEndpoints

  • ec2:DetachInternetGateway

  • ec2:DisassociateRouteTable

  • ec2:ReplaceRouteTableAssociation

If you use an existing VPC, your account does not require these permissions to delete network resources.

Additional IAM and S3 permissions that are required to create manifests
  • iam:CreateAccessKey

  • iam:CreateUser

  • iam:DeleteAccessKey

  • iam:DeleteUser

  • iam:DeleteUserPolicy

  • iam:GetUserPolicy

  • iam:ListAccessKeys

  • iam:PutUserPolicy

  • iam:TagUser

  • iam:GetUserPolicy

  • iam:ListAccessKeys

  • s3:PutBucketPublicAccessBlock

  • s3:GetBucketPublicAccessBlock

  • s3:PutLifecycleConfiguration

  • s3:HeadBucket

  • s3:ListBucketMultipartUploads

  • s3:AbortMultipartUpload

Generating an SSH private key and adding it to the agent

If you want to perform installation debugging or disaster recovery on your cluster, you must provide an SSH key to both your ssh-agent and the installation program. You can use this key to access the bootstrap machine in a public cluster to troubleshoot installation issues.

In a production environment, you require disaster recovery and debugging.

You can use this key to SSH into the master nodes as the user core. When you deploy the cluster, the key is added to the core user’s ~/.ssh/authorized_keys list.

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure
  1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

    $ ssh-keygen -t ed25519 -N '' \
        -f <path>/<file_name> (1)
    1 Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

    Running this command generates an SSH key that does not require a password in the location that you specified.

    If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

  2. Start the ssh-agent process as a background task:

    $ eval "$(ssh-agent -s)"
    Example output
    Agent pid 31874

If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

  1. Add your SSH private key to the ssh-agent:

    $ ssh-add <path>/<file_name> (1)
    Example output
    Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
    1 Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa
Next steps
  • When you install OpenShift Container Platform, provide the SSH public key to the installation program. If you install a cluster on infrastructure that you provision, you must provide this key to your cluster’s machines.

Creating the installation files for AWS

To install OpenShift Container Platform on Amazon Web Services (AWS) using user-provisioned infrastructure, you must generate the files that the installation program needs to deploy your cluster and modify them so that the cluster creates only the machines that it will use. You generate and customize the install-config.yaml file, Kubernetes manifests, and Ignition config files.

Creating the installation configuration file

Generate and customize the installation configuration file that the installation program needs to deploy your cluster.

Prerequisites
  • Obtain the OpenShift Container Platform installation program and the pull secret for your cluster. For a restricted network installation, these files are on your mirror host.

Procedure
  1. Obtain the install-config.yaml file.

    1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> (1)
      1 For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

    2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

        For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select aws as the platform to target.

      3. If you do not have an AWS profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.

      4. Select the AWS region to deploy the cluster to.

      5. Select the base domain for the Route 53 service that you configured for your cluster.

      6. Enter a descriptive name for your cluster.

      7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.

  2. Edit the install-config.yaml file to set the number of compute replicas, which are also known as worker replicas, to 0, as shown in the following compute stanza:

    compute:
    - hyperthreading: Enabled
      name: worker
      platform: {}
      replicas: 0
  3. Edit the install-config.yaml file to provide the additional information that is required for an installation in a restricted network.

    1. Update the pullSecret value to contain the authentication information for your registry:

      pullSecret: '{"auths":{"<local_registry>": {"auth": "<credentials>","email": "you@example.com"}}}'

      For <local_registry>, specify the registry domain name, and optionally the port, that your mirror registry uses to serve content. For example registry.example.com or registry.example.com:5000. For <credentials>, specify the base64-encoded user name and password for your mirror registry.

    2. Add the additionalTrustBundle parameter and value. The value must be the contents of the certificate file that you used for your mirror registry, which can be an exiting, trusted certificate authority or the self-signed certificate that you generated for the mirror registry.

      additionalTrustBundle: |
        -----BEGIN CERTIFICATE-----
        ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
        -----END CERTIFICATE-----
    3. Add the image content resources:

      imageContentSources:
      - mirrors:
        - <local_registry>/<local_repository_name>/release
        source: quay.io/openshift-release-dev/ocp-release
      - mirrors:
        - <local_registry>/<local_repository_name>/release
        source: quay.io/openshift-release-dev/ocp-v4.0-art-dev

      Use the imageContentSources section from the output of the command to mirror the repository or the values that you used when you mirrored the content from the media that you brought into your restricted network.

    4. Optional: Set the publishing strategy to Internal:

      publish: Internal

      By setting this option, you create an internal Ingress Controller and a private load balancer.

  4. Optional: Back up the install-config.yaml file.

    The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the Internet and instead have an HTTP or HTTPS proxy available. You can configure a new OpenShift Container Platform cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites
  • An existing install-config.yaml file.

  • Review the sites that your cluster requires access to and determine whether any need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. Add sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.

    The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.

    For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure
  1. Edit your install-config.yaml file and add the proxy settings. For example:

    apiVersion: v1
    baseDomain: my.domain.com
    proxy:
      httpProxy: http://<username>:<pswd>@<ip>:<port> (1)
      httpsProxy: http://<username>:<pswd>@<ip>:<port> (2)
      noProxy: example.com (3)
    additionalTrustBundle: | (4)
        -----BEGIN CERTIFICATE-----
        <MY_TRUSTED_CA_CERT>
        -----END CERTIFICATE-----
    ...
    1 A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http. If you use an MITM transparent proxy network that does not require additional proxy configuration but requires additional CAs, you must not specify an httpProxy value.
    2 A proxy URL to use for creating HTTPS connections outside the cluster. If this field is not specified, then httpProxy is used for both HTTP and HTTPS connections. If you use an MITM transparent proxy network that does not require additional proxy configuration but requires additional CAs, you must not specify an httpsProxy value.
    3 A comma-separated list of destination domain names, domains, IP addresses, or other network CIDRs to exclude proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass proxy for all destinations.
    4 If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the Proxy object’s trustedCA field. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle. If you use an MITM transparent proxy network that does not require additional proxy configuration but requires additional CAs, you must provide the MITM CA certificate.

    The installation program does not support the proxy readinessEndpoints field.

  2. Save the file and reference it when installing OpenShift Container Platform.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Creating the Kubernetes manifest and Ignition config files

Because you must modify some cluster definition files and manually start the cluster machines, you must generate the Kubernetes manifest and Ignition config files that the cluster needs to make its machines.

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

Prerequisites
  • Obtain the OpenShift Container Platform installation program. For a restricted network installation, these files are on your mirror host.

  • Create the install-config.yaml installation configuration file.

Procedure
  1. Generate the Kubernetes manifests for the cluster:

    $ ./openshift-install create manifests --dir=<installation_directory> (1)
    Example output
    INFO Consuming Install Config from target directory
    WARNING Making control-plane schedulable by setting MastersSchedulable to true for Scheduler cluster settings
    1 For <installation_directory>, specify the installation directory that contains the install-config.yaml file you created.

    Because you create your own compute machines later in the installation process, you can safely ignore this warning.

  2. Remove the Kubernetes manifest files that define the control plane machines:

    $ rm -f <installation_directory>/openshift/99_openshift-cluster-api_master-machines-*.yaml

    By removing these files, you prevent the cluster from automatically generating control plane machines.

  3. Remove the Kubernetes manifest files that define the worker machines:

    $ rm -f <installation_directory>/openshift/99_openshift-cluster-api_worker-machineset-*.yaml

    Because you create and manage the worker machines yourself, you do not need to initialize these machines.

  4. Modify the <installation_directory>/manifests/cluster-scheduler-02-config.yml Kubernetes manifest file to prevent pods from being scheduled on the control plane machines:

    1. Open the <installation_directory>/manifests/cluster-scheduler-02-config.yml file.

    2. Locate the mastersSchedulable parameter and set its value to False.

    3. Save and exit the file.

  5. Optional: If you do not want the Ingress Operator to create DNS records on your behalf, remove the privateZone and publicZone sections from the <installation_directory>/manifests/cluster-dns-02-config.yml DNS configuration file:

    apiVersion: config.openshift.io/v1
    kind: DNS
    metadata:
      creationTimestamp: null
      name: cluster
    spec:
      baseDomain: example.openshift.com
      privateZone: (1)
        id: mycluster-100419-private-zone
      publicZone: (1)
        id: example.openshift.com
    status: {}
    1 Remove this section completely.

    If you do so, you must add ingress DNS records manually in a later step.

  6. Obtain the Ignition config files:

    $ ./openshift-install create ignition-configs --dir=<installation_directory> (1)
    1 For <installation_directory>, specify the same installation directory.

    The following files are generated in the directory:

    .
    ├── auth
    │   ├── kubeadmin-password
    │   └── kubeconfig
    ├── bootstrap.ign
    ├── master.ign
    ├── metadata.json
    └── worker.ign

Extracting the infrastructure name

The Ignition config files contain a unique cluster identifier that you can use to uniquely identify your cluster in Amazon Web Services (AWS). The provided CloudFormation templates contain references to this infrastructure name, so you must extract it.

Prerequisites
  • Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

  • Generate the Ignition config files for your cluster.

  • Install the jq package.

Procedure
  • To extract and view the infrastructure name from the Ignition config file metadata, run the following command:

    $ jq -r .infraID <installation_directory>/metadata.json (1)
    1 For <installation_directory>, specify the path to the directory that you stored the installation files in.
    Example output
    openshift-vw9j6 (1)
    
    1 The output of this command is your cluster name and a random string.

Creating a VPC in AWS

You must create a VPC in Amazon Web Services (AWS) for your OpenShift Container Platform cluster to use. You can customize the VPC to meet your requirements, including VPN and route tables. The easiest way to create the VPC is to modify the provided CloudFormation template.

If you do not use the provided CloudFormation template to create your AWS infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites
  • Configure an AWS account.

  • Generate the Ignition config files for your cluster.

Procedure
  1. Create a JSON file that contains the parameter values that the template requires:

    [
      {
        "ParameterKey": "VpcCidr", (1)
        "ParameterValue": "10.0.0.0/16" (2)
      },
      {
        "ParameterKey": "AvailabilityZoneCount", (3)
        "ParameterValue": "1" (4)
      },
      {
        "ParameterKey": "SubnetBits", (5)
        "ParameterValue": "12" (6)
      }
    ]
    1 The CIDR block for the VPC.
    2 Specify a CIDR block in the format x.x.x.x/16-24.
    3 The number of availability zones to deploy the VPC in.
    4 Specify an integer between 1 and 3.
    5 The size of each subnet in each availability zone.
    6 Specify an integer between 5 and 13, where 5 is /27 and 13 is /19.
  2. Copy the template from the CloudFormation template for the VPC section of this topic and save it as a YAML file on your computer. This template describes the VPC that your cluster requires.

  3. Launch the template:

    You must enter the command on a single line.

    $ aws cloudformation create-stack --stack-name <name> (1)
         --template-body file://<template>.yaml (2)
         --parameters file://<parameters>.json (3)
    1 <name> is the name for the CloudFormation stack, such as cluster-vpc. You need the name of this stack if you remove the cluster.
    2 <template> is the relative path to and name of the CloudFormation template YAML file that you saved.
    3 <parameters> is the relative path to and name of the CloudFormation parameters JSON file.
  4. Confirm that the template components exist:

    $ aws cloudformation describe-stacks --stack-name <name>

    After the StackStatus displays CREATE_COMPLETE, the output displays values for the following parameters. You must provide these parameter values to the other CloudFormation templates that you run to create your cluster:

    VpcId

    The ID of your VPC.

    PublicSubnetIds

    The IDs of the new public subnets.

    PrivateSubnetIds

    The IDs of the new private subnets.

CloudFormation template for the VPC

You can use the following CloudFormation template to deploy the VPC that you need for your OpenShift Container Platform cluster.

CloudFormation template for the VPC
AWSTemplateFormatVersion: 2010-09-09
Description: Template for Best Practice VPC with 1-3 AZs

Parameters:
  VpcCidr:
    AllowedPattern: ^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(1[6-9]|2[0-4]))$
    ConstraintDescription: CIDR block parameter must be in the form x.x.x.x/16-24.
    Default: 10.0.0.0/16
    Description: CIDR block for VPC.
    Type: String
  AvailabilityZoneCount:
    ConstraintDescription: "The number of availability zones. (Min: 1, Max: 3)"
    MinValue: 1
    MaxValue: 3
    Default: 1
    Description: "How many AZs to create VPC subnets for. (Min: 1, Max: 3)"
    Type: Number
  SubnetBits:
    ConstraintDescription: CIDR block parameter must be in the form x.x.x.x/19-27.
    MinValue: 5
    MaxValue: 13
    Default: 12
    Description: "Size of each subnet to create within the availability zones. (Min: 5 = /27, Max: 13 = /19)"
    Type: Number

Metadata:
  AWS::CloudFormation::Interface:
    ParameterGroups:
    - Label:
        default: "Network Configuration"
      Parameters:
      - VpcCidr
      - SubnetBits
    - Label:
        default: "Availability Zones"
      Parameters:
      - AvailabilityZoneCount
    ParameterLabels:
      AvailabilityZoneCount:
        default: "Availability Zone Count"
      VpcCidr:
        default: "VPC CIDR"
      SubnetBits:
        default: "Bits Per Subnet"

Conditions:
  DoAz3: !Equals [3, !Ref AvailabilityZoneCount]
  DoAz2: !Or [!Equals [2, !Ref AvailabilityZoneCount], Condition: DoAz3]

Resources:
  VPC:
    Type: "AWS::EC2::VPC"
    Properties:
      EnableDnsSupport: "true"
      EnableDnsHostnames: "true"
      CidrBlock: !Ref VpcCidr
  PublicSubnet:
    Type: "AWS::EC2::Subnet"
    Properties:
      VpcId: !Ref VPC
      CidrBlock: !Select [0, !Cidr [!Ref VpcCidr, 6, !Ref SubnetBits]]
      AvailabilityZone: !Select
      - 0
      - Fn::GetAZs: !Ref "AWS::Region"
  PublicSubnet2:
    Type: "AWS::EC2::Subnet"
    Condition: DoAz2
    Properties:
      VpcId: !Ref VPC
      CidrBlock: !Select [1, !Cidr [!Ref VpcCidr, 6, !Ref SubnetBits]]
      AvailabilityZone: !Select
      - 1
      - Fn::GetAZs: !Ref "AWS::Region"
  PublicSubnet3:
    Type: "AWS::EC2::Subnet"
    Condition: DoAz3
    Properties:
      VpcId: !Ref VPC
      CidrBlock: !Select [2, !Cidr [!Ref VpcCidr, 6, !Ref SubnetBits]]
      AvailabilityZone: !Select
      - 2
      - Fn::GetAZs: !Ref "AWS::Region"
  InternetGateway:
    Type: "AWS::EC2::InternetGateway"
  GatewayToInternet:
    Type: "AWS::EC2::VPCGatewayAttachment"
    Properties:
      VpcId: !Ref VPC
      InternetGatewayId: !Ref InternetGateway
  PublicRouteTable:
    Type: "AWS::EC2::RouteTable"
    Properties:
      VpcId: !Ref VPC
  PublicRoute:
    Type: "AWS::EC2::Route"
    DependsOn: GatewayToInternet
    Properties:
      RouteTableId: !Ref PublicRouteTable
      DestinationCidrBlock: 0.0.0.0/0
      GatewayId: !Ref InternetGateway
  PublicSubnetRouteTableAssociation:
    Type: "AWS::EC2::SubnetRouteTableAssociation"
    Properties:
      SubnetId: !Ref PublicSubnet
      RouteTableId: !Ref PublicRouteTable
  PublicSubnetRouteTableAssociation2:
    Type: "AWS::EC2::SubnetRouteTableAssociation"
    Condition: DoAz2
    Properties:
      SubnetId: !Ref PublicSubnet2
      RouteTableId: !Ref PublicRouteTable
  PublicSubnetRouteTableAssociation3:
    Condition: DoAz3
    Type: "AWS::EC2::SubnetRouteTableAssociation"
    Properties:
      SubnetId: !Ref PublicSubnet3
      RouteTableId: !Ref PublicRouteTable
  PrivateSubnet:
    Type: "AWS::EC2::Subnet"
    Properties:
      VpcId: !Ref VPC
      CidrBlock: !Select [3, !Cidr [!Ref VpcCidr, 6, !Ref SubnetBits]]
      AvailabilityZone: !Select
      - 0
      - Fn::GetAZs: !Ref "AWS::Region"
  PrivateRouteTable:
    Type: "AWS::EC2::RouteTable"
    Properties:
      VpcId: !Ref VPC
  PrivateSubnetRouteTableAssociation:
    Type: "AWS::EC2::SubnetRouteTableAssociation"
    Properties:
      SubnetId: !Ref PrivateSubnet
      RouteTableId: !Ref PrivateRouteTable
  NAT:
    DependsOn:
    - GatewayToInternet
    Type: "AWS::EC2::NatGateway"
    Properties:
      AllocationId:
        "Fn::GetAtt":
        - EIP
        - AllocationId
      SubnetId: !Ref PublicSubnet
  EIP:
    Type: "AWS::EC2::EIP"
    Properties:
      Domain: vpc
  Route:
    Type: "AWS::EC2::Route"
    Properties:
      RouteTableId:
        Ref: PrivateRouteTable
      DestinationCidrBlock: 0.0.0.0/0
      NatGatewayId:
        Ref: NAT
  PrivateSubnet2:
    Type: "AWS::EC2::Subnet"
    Condition: DoAz2
    Properties:
      VpcId: !Ref VPC
      CidrBlock: !Select [4, !Cidr [!Ref VpcCidr, 6, !Ref SubnetBits]]
      AvailabilityZone: !Select
      - 1
      - Fn::GetAZs: !Ref "AWS::Region"
  PrivateRouteTable2:
    Type: "AWS::EC2::RouteTable"
    Condition: DoAz2
    Properties:
      VpcId: !Ref VPC
  PrivateSubnetRouteTableAssociation2:
    Type: "AWS::EC2::SubnetRouteTableAssociation"
    Condition: DoAz2
    Properties:
      SubnetId: !Ref PrivateSubnet2
      RouteTableId: !Ref PrivateRouteTable2
  NAT2:
    DependsOn:
    - GatewayToInternet
    Type: "AWS::EC2::NatGateway"
    Condition: DoAz2
    Properties:
      AllocationId:
        "Fn::GetAtt":
        - EIP2
        - AllocationId
      SubnetId: !Ref PublicSubnet2
  EIP2:
    Type: "AWS::EC2::EIP"
    Condition: DoAz2
    Properties:
      Domain: vpc
  Route2:
    Type: "AWS::EC2::Route"
    Condition: DoAz2
    Properties:
      RouteTableId:
        Ref: PrivateRouteTable2
      DestinationCidrBlock: 0.0.0.0/0
      NatGatewayId:
        Ref: NAT2
  PrivateSubnet3:
    Type: "AWS::EC2::Subnet"
    Condition: DoAz3
    Properties:
      VpcId: !Ref VPC
      CidrBlock: !Select [5, !Cidr [!Ref VpcCidr, 6, !Ref SubnetBits]]
      AvailabilityZone: !Select
      - 2
      - Fn::GetAZs: !Ref "AWS::Region"
  PrivateRouteTable3:
    Type: "AWS::EC2::RouteTable"
    Condition: DoAz3
    Properties:
      VpcId: !Ref VPC
  PrivateSubnetRouteTableAssociation3:
    Type: "AWS::EC2::SubnetRouteTableAssociation"
    Condition: DoAz3
    Properties:
      SubnetId: !Ref PrivateSubnet3
      RouteTableId: !Ref PrivateRouteTable3
  NAT3:
    DependsOn:
    - GatewayToInternet
    Type: "AWS::EC2::NatGateway"
    Condition: DoAz3
    Properties:
      AllocationId:
        "Fn::GetAtt":
        - EIP3
        - AllocationId
      SubnetId: !Ref PublicSubnet3
  EIP3:
    Type: "AWS::EC2::EIP"
    Condition: DoAz3
    Properties:
      Domain: vpc
  Route3:
    Type: "AWS::EC2::Route"
    Condition: DoAz3
    Properties:
      RouteTableId:
        Ref: PrivateRouteTable3
      DestinationCidrBlock: 0.0.0.0/0
      NatGatewayId:
        Ref: NAT3
  S3Endpoint:
    Type: AWS::EC2::VPCEndpoint
    Properties:
      PolicyDocument:
        Version: 2012-10-17
        Statement:
        - Effect: Allow
          Principal: '*'
          Action:
          - '*'
          Resource:
          - '*'
      RouteTableIds:
      - !Ref PublicRouteTable
      - !Ref PrivateRouteTable
      - !If [DoAz2, !Ref PrivateRouteTable2, !Ref "AWS::NoValue"]
      - !If [DoAz3, !Ref PrivateRouteTable3, !Ref "AWS::NoValue"]
      ServiceName: !Join
      - ''
      - - com.amazonaws.
        - !Ref 'AWS::Region'
        - .s3
      VpcId: !Ref VPC

Outputs:
  VpcId:
    Description: ID of the new VPC.
    Value: !Ref VPC
  PublicSubnetIds:
    Description: Subnet IDs of the public subnets.
    Value:
      !Join [
        ",",
        [!Ref PublicSubnet, !If [DoAz2, !Ref PublicSubnet2, !Ref "AWS::NoValue"], !If [DoAz3, !Ref PublicSubnet3, !Ref "AWS::NoValue"]]
      ]
  PrivateSubnetIds:
    Description: Subnet IDs of the private subnets.
    Value:
      !Join [
        ",",
        [!Ref PrivateSubnet, !If [DoAz2, !Ref PrivateSubnet2, !Ref "AWS::NoValue"], !If [DoAz3, !Ref PrivateSubnet3, !Ref "AWS::NoValue"]]
      ]

Creating networking and load balancing components in AWS

You must configure networking and load balancing (classic or network) in Amazon Web Services (AWS) for your OpenShift Container Platform cluster to use. The easiest way to create these components is to modify the provided CloudFormation template, which also creates a hosted zone and subnet tags.

You can run the template multiple times within a single VPC.

If you do not use the provided CloudFormation template to create your AWS infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites
  • Configure an AWS account.

  • Generate the Ignition config files for your cluster.

  • Create and configure a VPC and associated subnets in AWS.

Procedure
  1. Obtain the Hosted Zone ID for the Route 53 zone that you specified in the install-config.yaml file for your cluster. You can obtain this ID from the AWS console or by running the following command:

    You must enter the command on a single line.

    $ aws route53 list-hosted-zones-by-name |
         jq --arg name "<route53_domain>." \ (1)
         -r '.HostedZones | .[] | select(.Name=="\($name)") | .Id'
    1 For the <route53_domain>, specify the Route 53 base domain that you used when you generated the install-config.yaml file for the cluster.
  2. Create a JSON file that contains the parameter values that the template requires:

    [
      {
        "ParameterKey": "ClusterName", (1)
        "ParameterValue": "mycluster" (2)
      },
      {
        "ParameterKey": "InfrastructureName", (3)
        "ParameterValue": "mycluster-<random_string>" (4)
      },
      {
        "ParameterKey": "HostedZoneId", (5)
        "ParameterValue": "<random_string>" (6)
      },
      {
        "ParameterKey": "HostedZoneName", (7)
        "ParameterValue": "example.com" (8)
      },
      {
        "ParameterKey": "PublicSubnets", (9)
        "ParameterValue": "subnet-<random_string>" (10)
      },
      {
        "ParameterKey": "PrivateSubnets", (11)
        "ParameterValue": "subnet-<random_string>" (12)
      },
      {
        "ParameterKey": "VpcId", (13)
        "ParameterValue": "vpc-<random_string>" (14)
      }
    ]
    1 A short, representative cluster name to use for host names, etc.
    2 Specify the cluster name that you used when you generated the install-config.yaml file for the cluster.
    3 The name for your cluster infrastructure that is encoded in your Ignition config files for the cluster.
    4 Specify the infrastructure name that you extracted from the Ignition config file metadata, which has the format <cluster-name>-<random-string>.
    5 The Route 53 public zone ID to register the targets with.
    6 Specify the Route 53 public zone ID, which as a format similar to Z21IXYZABCZ2A4. You can obtain this value from the AWS console.
    7 The Route 53 zone to register the targets with.
    8 Specify the Route 53 base domain that you used when you generated the install-config.yaml file for the cluster. Do not include the trailing period (.) that is displayed in the AWS console.
    9 The public subnets that you created for your VPC.
    10 Specify the PublicSubnetIds value from the output of the CloudFormation template for the VPC.
    11 The private subnets that you created for your VPC.
    12 Specify the PrivateSubnetIds value from the output of the CloudFormation template for the VPC.
    13 The VPC that you created for the cluster.
    14 Specify the VpcId value from the output of the CloudFormation template for the VPC.
  3. Copy the template from the CloudFormation template for the network and load balancers section of this topic and save it as a YAML file on your computer. This template describes the networking and load balancing objects that your cluster requires.

  4. Launch the template:

    You must enter the command on a single line.

    $ aws cloudformation create-stack --stack-name <name> (1)
         --template-body file://<template>.yaml (2)
         --parameters file://<parameters>.json (3)
         --capabilities CAPABILITY_NAMED_IAM
    1 <name> is the name for the CloudFormation stack, such as cluster-dns. You need the name of this stack if you remove the cluster.
    2 <template> is the relative path to and name of the CloudFormation template YAML file that you saved.
    3 <parameters> is the relative path to and name of the CloudFormation parameters JSON file.
  5. Confirm that the template components exist:

    $ aws cloudformation describe-stacks --stack-name <name>

    After the StackStatus displays CREATE_COMPLETE, the output displays values for the following parameters. You must provide these parameter values to the other CloudFormation templates that you run to create your cluster:

    PrivateHostedZoneId

    Hosted zone ID for the private DNS.

    ExternalApiLoadBalancerName

    Full name of the external API load balancer.

    InternalApiLoadBalancerName

    Full name of the internal API load balancer.

    ApiServerDnsName

    Full host name of the API server.

    RegisterNlbIpTargetsLambda

    Lambda ARN useful to help register/deregister IP targets for these load balancers.

    ExternalApiTargetGroupArn

    ARN of external API target group.

    InternalApiTargetGroupArn

    ARN of internal API target group.

    InternalServiceTargetGroupArn

    ARN of internal service target group.

CloudFormation template for the network and load balancers

You can use the following CloudFormation template to deploy the networking objects and load balancers that you need for your OpenShift Container Platform cluster.

CloudFormation template for the network and load balancers
AWSTemplateFormatVersion: 2010-09-09
Description: Template for OpenShift Cluster Network Elements (Route53 & LBs)

Parameters:
  ClusterName:
    AllowedPattern: ^([a-zA-Z][a-zA-Z0-9\-]{0,26})$
    MaxLength: 27
    MinLength: 1
    ConstraintDescription: Cluster name must be alphanumeric, start with a letter, and have a maximum of 27 characters.
    Description: A short, representative cluster name to use for host names and other identifying names.
    Type: String
  InfrastructureName:
    AllowedPattern: ^([a-zA-Z][a-zA-Z0-9\-]{0,26})$
    MaxLength: 27
    MinLength: 1
    ConstraintDescription: Infrastructure name must be alphanumeric, start with a letter, and have a maximum of 27 characters.
    Description: A short, unique cluster ID used to tag cloud resources and identify items owned or used by the cluster.
    Type: String
  HostedZoneId:
    Description: The Route53 public zone ID to register the targets with, such as Z21IXYZABCZ2A4.
    Type: String
  HostedZoneName:
    Description: The Route53 zone to register the targets with, such as example.com. Omit the trailing period.
    Type: String
    Default: "example.com"
  PublicSubnets:
    Description: The internet-facing subnets.
    Type: List<AWS::EC2::Subnet::Id>
  PrivateSubnets:
    Description: The internal subnets.
    Type: List<AWS::EC2::Subnet::Id>
  VpcId:
    Description: The VPC-scoped resources will belong to this VPC.
    Type: AWS::EC2::VPC::Id

Metadata:
  AWS::CloudFormation::Interface:
    ParameterGroups:
    - Label:
        default: "Cluster Information"
      Parameters:
      - ClusterName
      - InfrastructureName
    - Label:
        default: "Network Configuration"
      Parameters:
      - VpcId
      - PublicSubnets
      - PrivateSubnets
    - Label:
        default: "DNS"
      Parameters:
      - HostedZoneName
      - HostedZoneId
    ParameterLabels:
      ClusterName:
        default: "Cluster Name"
      InfrastructureName:
        default: "Infrastructure Name"
      VpcId:
        default: "VPC ID"
      PublicSubnets:
        default: "Public Subnets"
      PrivateSubnets:
        default: "Private Subnets"
      HostedZoneName:
        default: "Public Hosted Zone Name"
      HostedZoneId:
        default: "Public Hosted Zone ID"

Resources:
  ExtApiElb:
    Type: AWS::ElasticLoadBalancingV2::LoadBalancer
    Properties:
      Name: !Join ["-", [!Ref InfrastructureName, "ext"]]
      IpAddressType: ipv4
      Subnets: !Ref PublicSubnets
      Type: network

  IntApiElb:
    Type: AWS::ElasticLoadBalancingV2::LoadBalancer
    Properties:
      Name: !Join ["-", [!Ref InfrastructureName, "int"]]
      Scheme: internal
      IpAddressType: ipv4
      Subnets: !Ref PrivateSubnets
      Type: network

  IntDns:
    Type: "AWS::Route53::HostedZone"
    Properties:
      HostedZoneConfig:
        Comment: "Managed by CloudFormation"
      Name: !Join [".", [!Ref ClusterName, !Ref HostedZoneName]]
      HostedZoneTags:
      - Key: Name
        Value: !Join ["-", [!Ref InfrastructureName, "int"]]
      - Key: !Join ["", ["kubernetes.io/cluster/", !Ref InfrastructureName]]
        Value: "owned"
      VPCs:
      - VPCId: !Ref VpcId
        VPCRegion: !Ref "AWS::Region"

  ExternalApiServerRecord:
    Type: AWS::Route53::RecordSetGroup
    Properties:
      Comment: Alias record for the API server
      HostedZoneId: !Ref HostedZoneId
      RecordSets:
      - Name:
          !Join [
            ".",
            ["api", !Ref ClusterName, !Join ["", [!Ref HostedZoneName, "."]]],
          ]
        Type: A
        AliasTarget:
          HostedZoneId: !GetAtt ExtApiElb.CanonicalHostedZoneID
          DNSName: !GetAtt ExtApiElb.DNSName

  InternalApiServerRecord:
    Type: AWS::Route53::RecordSetGroup
    Properties:
      Comment: Alias record for the API server
      HostedZoneId: !Ref IntDns
      RecordSets:
      - Name:
          !Join [
            ".",
            ["api", !Ref ClusterName, !Join ["", [!Ref HostedZoneName, "."]]],
          ]
        Type: A
        AliasTarget:
          HostedZoneId: !GetAtt IntApiElb.CanonicalHostedZoneID
          DNSName: !GetAtt IntApiElb.DNSName
      - Name:
          !Join [
            ".",
            ["api-int", !Ref ClusterName, !Join ["", [!Ref HostedZoneName, "."]]],
          ]
        Type: A
        AliasTarget:
          HostedZoneId: !GetAtt IntApiElb.CanonicalHostedZoneID
          DNSName: !GetAtt IntApiElb.DNSName

  ExternalApiListener:
    Type: AWS::ElasticLoadBalancingV2::Listener
    Properties:
      DefaultActions:
      - Type: forward
        TargetGroupArn:
          Ref: ExternalApiTargetGroup
      LoadBalancerArn:
        Ref: ExtApiElb
      Port: 6443
      Protocol: TCP

  ExternalApiTargetGroup:
    Type: AWS::ElasticLoadBalancingV2::TargetGroup
    Properties:
      HealthCheckIntervalSeconds: 10
      HealthCheckPath: "/readyz"
      HealthCheckPort: 6443
      HealthCheckProtocol: HTTPS
      HealthyThresholdCount: 2
      UnhealthyThresholdCount: 2
      Port: 6443
      Protocol: TCP
      TargetType: ip
      VpcId:
        Ref: VpcId
      TargetGroupAttributes:
      - Key: deregistration_delay.timeout_seconds
        Value: 60

  InternalApiListener:
    Type: AWS::ElasticLoadBalancingV2::Listener
    Properties:
      DefaultActions:
      - Type: forward
        TargetGroupArn:
          Ref: InternalApiTargetGroup
      LoadBalancerArn:
        Ref: IntApiElb
      Port: 6443
      Protocol: TCP

  InternalApiTargetGroup:
    Type: AWS::ElasticLoadBalancingV2::TargetGroup
    Properties:
      HealthCheckIntervalSeconds: 10
      HealthCheckPath: "/readyz"
      HealthCheckPort: 6443
      HealthCheckProtocol: HTTPS
      HealthyThresholdCount: 2
      UnhealthyThresholdCount: 2
      Port: 6443
      Protocol: TCP
      TargetType: ip
      VpcId:
        Ref: VpcId
      TargetGroupAttributes:
      - Key: deregistration_delay.timeout_seconds
        Value: 60

  InternalServiceInternalListener:
    Type: AWS::ElasticLoadBalancingV2::Listener
    Properties:
      DefaultActions:
      - Type: forward
        TargetGroupArn:
          Ref: InternalServiceTargetGroup
      LoadBalancerArn:
        Ref: IntApiElb
      Port: 22623
      Protocol: TCP

  InternalServiceTargetGroup:
    Type: AWS::ElasticLoadBalancingV2::TargetGroup
    Properties:
      HealthCheckIntervalSeconds: 10
      HealthCheckPath: "/healthz"
      HealthCheckPort: 22623
      HealthCheckProtocol: HTTPS
      HealthyThresholdCount: 2
      UnhealthyThresholdCount: 2
      Port: 22623
      Protocol: TCP
      TargetType: ip
      VpcId:
        Ref: VpcId
      TargetGroupAttributes:
      - Key: deregistration_delay.timeout_seconds
        Value: 60

  RegisterTargetLambdaIamRole:
    Type: AWS::IAM::Role
    Properties:
      RoleName: !Join ["-", [!Ref InfrastructureName, "nlb", "lambda", "role"]]
      AssumeRolePolicyDocument:
        Version: "2012-10-17"
        Statement:
        - Effect: "Allow"
          Principal:
            Service:
            - "lambda.amazonaws.com"
          Action:
          - "sts:AssumeRole"
      Path: "/"
      Policies:
      - PolicyName: !Join ["-", [!Ref InfrastructureName, "master", "policy"]]
        PolicyDocument:
          Version: "2012-10-17"
          Statement:
          - Effect: "Allow"
            Action:
              [
                "elasticloadbalancing:RegisterTargets",
                "elasticloadbalancing:DeregisterTargets",
              ]
            Resource: !Ref InternalApiTargetGroup
          - Effect: "Allow"
            Action:
              [
                "elasticloadbalancing:RegisterTargets",
                "elasticloadbalancing:DeregisterTargets",
              ]
            Resource: !Ref InternalServiceTargetGroup
          - Effect: "Allow"
            Action:
              [
                "elasticloadbalancing:RegisterTargets",
                "elasticloadbalancing:DeregisterTargets",
              ]
            Resource: !Ref ExternalApiTargetGroup

  RegisterNlbIpTargets:
    Type: "AWS::Lambda::Function"
    Properties:
      Handler: "index.handler"
      Role:
        Fn::GetAtt:
        - "RegisterTargetLambdaIamRole"
        - "Arn"
      Code:
        ZipFile: |
          import json
          import boto3
          import cfnresponse
          def handler(event, context):
            elb = boto3.client('elbv2')
            if event['RequestType'] == 'Delete':
              elb.deregister_targets(TargetGroupArn=event['ResourceProperties']['TargetArn'],Targets=[{'Id': event['ResourceProperties']['TargetIp']}])
            elif event['RequestType'] == 'Create':
              elb.register_targets(TargetGroupArn=event['ResourceProperties']['TargetArn'],Targets=[{'Id': event['ResourceProperties']['TargetIp']}])
            responseData = {}
            cfnresponse.send(event, context, cfnresponse.SUCCESS, responseData, event['ResourceProperties']['TargetArn']+event['ResourceProperties']['TargetIp'])
      Runtime: "python3.7"
      Timeout: 120

  RegisterSubnetTagsLambdaIamRole:
    Type: AWS::IAM::Role
    Properties:
      RoleName: !Join ["-", [!Ref InfrastructureName, "subnet-tags-lambda-role"]]
      AssumeRolePolicyDocument:
        Version: "2012-10-17"
        Statement:
        - Effect: "Allow"
          Principal:
            Service:
            - "lambda.amazonaws.com"
          Action:
          - "sts:AssumeRole"
      Path: "/"
      Policies:
      - PolicyName: !Join ["-", [!Ref InfrastructureName, "subnet-tagging-policy"]]
        PolicyDocument:
          Version: "2012-10-17"
          Statement:
          - Effect: "Allow"
            Action:
              [
                "ec2:DeleteTags",
                "ec2:CreateTags"
              ]
            Resource: "arn:aws:ec2:*:*:subnet/*"
          - Effect: "Allow"
            Action:
              [
                "ec2:DescribeSubnets",
                "ec2:DescribeTags"
              ]
            Resource: "*"

  RegisterSubnetTags:
    Type: "AWS::Lambda::Function"
    Properties:
      Handler: "index.handler"
      Role:
        Fn::GetAtt:
        - "RegisterSubnetTagsLambdaIamRole"
        - "Arn"
      Code:
        ZipFile: |
          import json
          import boto3
          import cfnresponse
          def handler(event, context):
            ec2_client = boto3.client('ec2')
            if event['RequestType'] == 'Delete':
              for subnet_id in event['ResourceProperties']['Subnets']:
                ec2_client.delete_tags(Resources=[subnet_id], Tags=[{'Key': 'kubernetes.io/cluster/' + event['ResourceProperties']['InfrastructureName']}]);
            elif event['RequestType'] == 'Create':
              for subnet_id in event['ResourceProperties']['Subnets']:
                ec2_client.create_tags(Resources=[subnet_id], Tags=[{'Key': 'kubernetes.io/cluster/' + event['ResourceProperties']['InfrastructureName'], 'Value': 'shared'}]);
            responseData = {}
            cfnresponse.send(event, context, cfnresponse.SUCCESS, responseData, event['ResourceProperties']['InfrastructureName']+event['ResourceProperties']['Subnets'][0])
      Runtime: "python3.7"
      Timeout: 120

  RegisterPublicSubnetTags:
    Type: Custom::SubnetRegister
    Properties:
      ServiceToken: !GetAtt RegisterSubnetTags.Arn
      InfrastructureName: !Ref InfrastructureName
      Subnets: !Ref PublicSubnets

  RegisterPrivateSubnetTags:
    Type: Custom::SubnetRegister
    Properties:
      ServiceToken: !GetAtt RegisterSubnetTags.Arn
      InfrastructureName: !Ref InfrastructureName
      Subnets: !Ref PrivateSubnets

Outputs:
  PrivateHostedZoneId:
    Description: Hosted zone ID for the private DNS, which is required for private records.
    Value: !Ref IntDns
  ExternalApiLoadBalancerName:
    Description: Full name of the external API load balancer.
    Value: !GetAtt ExtApiElb.LoadBalancerFullName
  InternalApiLoadBalancerName:
    Description: Full name of the internal API load balancer.
    Value: !GetAtt IntApiElb.LoadBalancerFullName
  ApiServerDnsName:
    Description: Full hostname of the API server, which is required for the Ignition config files.
    Value: !Join [".", ["api-int", !Ref ClusterName, !Ref HostedZoneName]]
  RegisterNlbIpTargetsLambda:
    Description: Lambda ARN useful to help register or deregister IP targets for these load balancers.
    Value: !GetAtt RegisterNlbIpTargets.Arn
  ExternalApiTargetGroupArn:
    Description: ARN of the external API target group.
    Value: !Ref ExternalApiTargetGroup
  InternalApiTargetGroupArn:
    Description: ARN of the internal API target group.
    Value: !Ref InternalApiTargetGroup
  InternalServiceTargetGroupArn:
    Description: ARN of the internal service target group.
    Value: !Ref InternalServiceTargetGroup

Creating security group and roles in AWS

You must create security groups and roles in Amazon Web Services (AWS) for your OpenShift Container Platform cluster to use. The easiest way to create these components is to modify the provided CloudFormation template.

If you do not use the provided CloudFormation template to create your AWS infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites
  • Configure an AWS account.

  • Generate the Ignition config files for your cluster.

  • Create and configure a VPC and associated subnets in AWS.

Procedure
  1. Create a JSON file that contains the parameter values that the template requires:

    [
      {
        "ParameterKey": "InfrastructureName", (1)
        "ParameterValue": "mycluster-<random_string>" (2)
      },
      {
        "ParameterKey": "VpcCidr", (3)
        "ParameterValue": "10.0.0.0/16" (4)
      },
      {
        "ParameterKey": "PrivateSubnets", (5)
        "ParameterValue": "subnet-<random_string>" (6)
      },
      {
        "ParameterKey": "VpcId", (7)
        "ParameterValue": "vpc-<random_string>" (8)
      }
    ]
    1 The name for your cluster infrastructure that is encoded in your Ignition config files for the cluster.
    2 Specify the infrastructure name that you extracted from the Ignition config file metadata, which has the format <cluster-name>-<random-string>.
    3 The CIDR block for the VPC.
    4 Specify the CIDR block parameter that you used for the VPC that you defined in the form x.x.x.x/16-24.
    5 The private subnets that you created for your VPC.
    6 Specify the PrivateSubnetIds value from the output of the CloudFormation template for the VPC.
    7 The VPC that you created for the cluster.
    8 Specify the VpcId value from the output of the CloudFormation template for the VPC.
  2. Copy the template from the CloudFormation template for security objects section of this topic and save it as a YAML file on your computer. This template describes the security groups and roles that your cluster requires.

  3. Launch the template:

    You must enter the command on a single line.

    $ aws cloudformation create-stack --stack-name <name> (1)
         --template-body file://<template>.yaml (2)
         --parameters file://<parameters>.json (3)
         --capabilities CAPABILITY_NAMED_IAM
    1 <name> is the name for the CloudFormation stack, such as cluster-sec. You need the name of this stack if you remove the cluster.
    2 <template> is the relative path to and name of the CloudFormation template YAML file that you saved.
    3 <parameters> is the relative path to and name of the CloudFormation parameters JSON file.
  4. Confirm that the template components exist:

    $ aws cloudformation describe-stacks --stack-name <name>

    After the StackStatus displays CREATE_COMPLETE, the output displays values for the following parameters. You must provide these parameter values to the other CloudFormation templates that you run to create your cluster:

    MasterSecurityGroupId

    Master Security Group ID

    WorkerSecurityGroupId

    Worker Security Group ID

    MasterInstanceProfile

    Master IAM Instance Profile

    WorkerInstanceProfile

    Worker IAM Instance Profile

CloudFormation template for security objects

You can use the following CloudFormation template to deploy the security objects that you need for your OpenShift Container Platform cluster.

CloudFormation template for security objects
AWSTemplateFormatVersion: 2010-09-09
Description: Template for OpenShift Cluster Security Elements (Security Groups & IAM)

Parameters:
  InfrastructureName:
    AllowedPattern: ^([a-zA-Z][a-zA-Z0-9\-]{0,26})$
    MaxLength: 27
    MinLength: 1
    ConstraintDescription: Infrastructure name must be alphanumeric, start with a letter, and have a maximum of 27 characters.
    Description: A short, unique cluster ID used to tag cloud resources and identify items owned or used by the cluster.
    Type: String
  VpcCidr:
    AllowedPattern: ^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/(1[6-9]|2[0-4]))$
    ConstraintDescription: CIDR block parameter must be in the form x.x.x.x/16-24.
    Default: 10.0.0.0/16
    Description: CIDR block for VPC.
    Type: String
  VpcId:
    Description: The VPC-scoped resources will belong to this VPC.
    Type: AWS::EC2::VPC::Id
  PrivateSubnets:
    Description: The internal subnets.
    Type: List<AWS::EC2::Subnet::Id>

Metadata:
  AWS::CloudFormation::Interface:
    ParameterGroups:
    - Label:
        default: "Cluster Information"
      Parameters:
      - InfrastructureName
    - Label:
        default: "Network Configuration"
      Parameters:
      - VpcId
      - VpcCidr
      - PrivateSubnets
    ParameterLabels:
      InfrastructureName:
        default: "Infrastructure Name"
      VpcId:
        default: "VPC ID"
      VpcCidr:
        default: "VPC CIDR"
      PrivateSubnets:
        default: "Private Subnets"

Resources:
  MasterSecurityGroup:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupDescription: Cluster Master Security Group
      SecurityGroupIngress:
      - IpProtocol: icmp
        FromPort: 0
        ToPort: 0
        CidrIp: !Ref VpcCidr
      - IpProtocol: tcp
        FromPort: 22
        ToPort: 22
        CidrIp: !Ref VpcCidr
      - IpProtocol: tcp
        ToPort: 6443
        FromPort: 6443
        CidrIp: !Ref VpcCidr
      - IpProtocol: tcp
        FromPort: 22623
        ToPort: 22623
        CidrIp: !Ref VpcCidr
      VpcId: !Ref VpcId

  WorkerSecurityGroup:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupDescription: Cluster Worker Security Group
      SecurityGroupIngress:
      - IpProtocol: icmp
        FromPort: 0
        ToPort: 0
        CidrIp: !Ref VpcCidr
      - IpProtocol: tcp
        FromPort: 22
        ToPort: 22
        CidrIp: !Ref VpcCidr
      VpcId: !Ref VpcId

  MasterIngressEtcd:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: etcd
      FromPort: 2379
      ToPort: 2380
      IpProtocol: tcp

  MasterIngressVxlan:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Vxlan packets
      FromPort: 4789
      ToPort: 4789
      IpProtocol: udp

  MasterIngressWorkerVxlan:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Vxlan packets
      FromPort: 4789
      ToPort: 4789
      IpProtocol: udp

  MasterIngressGeneve:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Geneve packets
      FromPort: 6081
      ToPort: 6081
      IpProtocol: udp

  MasterIngressWorkerGeneve:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Geneve packets
      FromPort: 6081
      ToPort: 6081
      IpProtocol: udp

  MasterIngressInternal:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: tcp

  MasterIngressWorkerInternal:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: tcp

  MasterIngressInternalUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: udp

  MasterIngressWorkerInternalUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: udp

  MasterIngressKube:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Kubernetes kubelet, scheduler and controller manager
      FromPort: 10250
      ToPort: 10259
      IpProtocol: tcp

  MasterIngressWorkerKube:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Kubernetes kubelet, scheduler and controller manager
      FromPort: 10250
      ToPort: 10259
      IpProtocol: tcp

  MasterIngressIngressServices:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: tcp

  MasterIngressWorkerIngressServices:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: tcp

  MasterIngressIngressServicesUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: udp

  MasterIngressWorkerIngressServicesUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt MasterSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: udp

  WorkerIngressVxlan:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Vxlan packets
      FromPort: 4789
      ToPort: 4789
      IpProtocol: udp

  WorkerIngressMasterVxlan:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Vxlan packets
      FromPort: 4789
      ToPort: 4789
      IpProtocol: udp

  WorkerIngressGeneve:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Geneve packets
      FromPort: 6081
      ToPort: 6081
      IpProtocol: udp

  WorkerIngressMasterGeneve:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Geneve packets
      FromPort: 6081
      ToPort: 6081
      IpProtocol: udp

  WorkerIngressInternal:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: tcp

  WorkerIngressMasterInternal:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: tcp

  WorkerIngressInternalUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: udp

  WorkerIngressMasterInternalUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Internal cluster communication
      FromPort: 9000
      ToPort: 9999
      IpProtocol: udp

  WorkerIngressKube:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Kubernetes secure kubelet port
      FromPort: 10250
      ToPort: 10250
      IpProtocol: tcp

  WorkerIngressWorkerKube:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Internal Kubernetes communication
      FromPort: 10250
      ToPort: 10250
      IpProtocol: tcp

  WorkerIngressIngressServices:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: tcp

  WorkerIngressMasterIngressServices:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: tcp

  WorkerIngressIngressServicesUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt WorkerSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: udp

  WorkerIngressMasterIngressServicesUDP:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      GroupId: !GetAtt WorkerSecurityGroup.GroupId
      SourceSecurityGroupId: !GetAtt MasterSecurityGroup.GroupId
      Description: Kubernetes ingress services
      FromPort: 30000
      ToPort: 32767
      IpProtocol: udp

  MasterIamRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Version: "2012-10-17"
        Statement:
        - Effect: "Allow"
          Principal:
            Service:
            - "ec2.amazonaws.com"
          Action:
          - "sts:AssumeRole"
      Policies:
      - PolicyName: !Join ["-", [!Ref InfrastructureName, "master", "policy"]]
        PolicyDocument:
          Version: "2012-10-17"
          Statement:
          - Effect: "Allow"
            Action:
            - "ec2:AttachVolume"
            - "ec2:AuthorizeSecurityGroupIngress"
            - "ec2:CreateSecurityGroup"
            - "ec2:CreateTags"
            - "ec2:CreateVolume"
            - "ec2:DeleteSecurityGroup"
            - "ec2:DeleteVolume"
            - "ec2:Describe*"
            - "ec2:DetachVolume"
            - "ec2:ModifyInstanceAttribute"
            - "ec2:ModifyVolume"
            - "ec2:RevokeSecurityGroupIngress"
            - "elasticloadbalancing:AddTags"
            - "elasticloadbalancing:AttachLoadBalancerToSubnets"
            - "elasticloadbalancing:ApplySecurityGroupsToLoadBalancer"
            - "elasticloadbalancing:CreateListener"
            - "elasticloadbalancing:CreateLoadBalancer"
            - "elasticloadbalancing:CreateLoadBalancerPolicy"
            - "elasticloadbalancing:CreateLoadBalancerListeners"
            - "elasticloadbalancing:CreateTargetGroup"
            - "elasticloadbalancing:ConfigureHealthCheck"
            - "elasticloadbalancing:DeleteListener"
            - "elasticloadbalancing:DeleteLoadBalancer"
            - "elasticloadbalancing:DeleteLoadBalancerListeners"
            - "elasticloadbalancing:DeleteTargetGroup"
            - "elasticloadbalancing:DeregisterInstancesFromLoadBalancer"
            - "elasticloadbalancing:DeregisterTargets"
            - "elasticloadbalancing:Describe*"
            - "elasticloadbalancing:DetachLoadBalancerFromSubnets"
            - "elasticloadbalancing:ModifyListener"
            - "elasticloadbalancing:ModifyLoadBalancerAttributes"
            - "elasticloadbalancing:ModifyTargetGroup"
            - "elasticloadbalancing:ModifyTargetGroupAttributes"
            - "elasticloadbalancing:RegisterInstancesWithLoadBalancer"
            - "elasticloadbalancing:RegisterTargets"
            - "elasticloadbalancing:SetLoadBalancerPoliciesForBackendServer"
            - "elasticloadbalancing:SetLoadBalancerPoliciesOfListener"
            - "kms:DescribeKey"
            Resource: "*"

  MasterInstanceProfile:
    Type: "AWS::IAM::InstanceProfile"
    Properties:
      Roles:
      - Ref: "MasterIamRole"

  WorkerIamRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Version: "2012-10-17"
        Statement:
        - Effect: "Allow"
          Principal:
            Service:
            - "ec2.amazonaws.com"
          Action:
          - "sts:AssumeRole"
      Policies:
      - PolicyName: !Join ["-", [!Ref InfrastructureName, "worker", "policy"]]
        PolicyDocument:
          Version: "2012-10-17"
          Statement:
          - Effect: "Allow"
            Action:
            - "ec2:DescribeInstances"
            - "ec2:DescribeRegions"
            Resource: "*"

  WorkerInstanceProfile:
    Type: "AWS::IAM::InstanceProfile"
    Properties:
      Roles:
      - Ref: "WorkerIamRole"

Outputs:
  MasterSecurityGroupId:
    Description: Master Security Group ID
    Value: !GetAtt MasterSecurityGroup.GroupId

  WorkerSecurityGroupId:
    Description: Worker Security Group ID
    Value: !GetAtt WorkerSecurityGroup.GroupId

  MasterInstanceProfile:
    Description: Master IAM Instance Profile
    Value: !Ref MasterInstanceProfile

  WorkerInstanceProfile:
    Description: Worker IAM Instance Profile
    Value: !Ref WorkerInstanceProfile

RHCOS AMIs for the AWS infrastructure

You must use a valid Red Hat Enterprise Linux CoreOS (RHCOS) AMI for your Amazon Web Services (AWS) zone for your OpenShift Container Platform nodes.

Table 2. RHCOS AMIs
AWS zone AWS AMI

ap-northeast-1

ami-0530d04240177f118

ap-northeast-2

ami-09e4cd700276785d2

ap-south-1

ami-0754b15d212830477

ap-southeast-1

ami-03b46cc4b1518c5a8

ap-southeast-2

ami-0a5b99ab2234a4e6a

ca-central-1

ami-012bc4ee3b6c673bc

eu-central-1

ami-02e08df1201f1c2f8

eu-north-1

ami-0309c9d2fadcb2d5a

eu-west-1

ami-0bdd69d8e7cd18188

eu-west-2

ami-0e610e967a62dbdfa

eu-west-3

ami-0e817e26f638a71ac

me-south-1

ami-024117d7c87b7ff08

sa-east-1

ami-08e62f746b94950c1

us-east-1

ami-077ede5bed2e431ea

us-east-2

ami-0f4ecf819275850dd

us-west-1

ami-0c4990e435bc6c5fe

us-west-2

ami-000d6e92357ac605c

Creating the bootstrap node in AWS

You must create the bootstrap node in Amazon Web Services (AWS) to use during OpenShift Container Platform cluster initialization. The easiest way to create this node is to modify the provided CloudFormation template.

If you do not use the provided CloudFormation template to create your bootstrap node, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites
  • Configure an AWS account.

  • Generate the Ignition config files for your cluster.

  • Create and configure a VPC and associated subnets in AWS.

  • Create and configure DNS, load balancers, and listeners in AWS.

  • Create control plane and compute roles.

Procedure
  1. Provide a location to serve the bootstrap.ign Ignition config file to your cluster. This file is located in your installation directory. One way to do this is to create an S3 bucket in your cluster’s region and upload the Ignition config file to it.

    The provided CloudFormation Template assumes that the Ignition config files for your cluster are served from an S3 bucket. If you choose to serve the files from another location, you must modify the templates.

    The bootstrap Ignition config file does contain secrets, like X.509 keys. The following steps provide basic security for the S3 bucket. To provide additional security, you can enable an S3 bucket policy to allow only certain users, such as the OpenShift IAM user, to access objects that the bucket contains. You can avoid S3 entirely and serve your bootstrap Ignition config file from any address that the bootstrap machine can reach.

    1. Create the bucket:

      $ aws s3 mb s3://<cluster-name>-infra (1)
      1 <cluster-name>-infra is the bucket name.
    2. Upload the bootstrap.ign Ignition config file to the bucket:

      $ aws s3 cp bootstrap.ign s3://<cluster-name>-infra/bootstrap.ign
    3. Verify that the file uploaded:

      $ aws s3 ls s3://<cluster-name>-infra/
      Example output
      2019-04-03 16:15:16     314878 bootstrap.ign
  2. Create a JSON file that contains the parameter values that the template requires:

    [
      {
        "ParameterKey": "InfrastructureName", (1)
        "ParameterValue": "mycluster-<random_string>" (2)
      },
      {
        "ParameterKey": "RhcosAmi", (3)
        "ParameterValue": "ami-<random_string>" (4)
      },
      {
        "ParameterKey": "AllowedBootstrapSshCidr", (5)
        "ParameterValue": "0.0.0.0/0" (6)
      },
      {
        "ParameterKey": "PublicSubnet", (7)
        "ParameterValue": "subnet-<random_string>" (8)
      },
      {
        "ParameterKey": "MasterSecurityGroupId", (9)
        "ParameterValue": "sg-<random_string>" (10)
      },
      {
        "ParameterKey": "VpcId", (11)
        "ParameterValue": "vpc-<random_string>" (12)
      },
      {
        "ParameterKey": "BootstrapIgnitionLocation", (13)
        "ParameterValue": "s3://<bucket_name>/bootstrap.ign" (14)
      },
      {
        "ParameterKey": "AutoRegisterELB", (15)
        "ParameterValue": "yes" (16)
      },
      {
        "ParameterKey": "RegisterNlbIpTargetsLambdaArn", (17)
        "ParameterValue": "arn:aws:lambda:<region>:<account_number>:function:<dns_stack_name>-RegisterNlbIpTargets-<random_string>" (18)
      },
      {
        "ParameterKey": "ExternalApiTargetGroupArn", (19)
        "ParameterValue": "arn:aws:elasticloadbalancing:<region>:<account_number>:targetgroup/<dns_stack_name>-Exter-<random_string>" (20)
      },
      {
        "ParameterKey": "InternalApiTargetGroupArn", (21)
        "ParameterValue": "arn:aws:elasticloadbalancing:<region>:<account_number>:targetgroup/<dns_stack_name>-Inter-<random_string>" (22)
      },
      {
        "ParameterKey": "InternalServiceTargetGroupArn", (23)
        "ParameterValue": "arn:aws:elasticloadbalancing:<region>:<account_number>:targetgroup/<dns_stack_name>-Inter-<random_string>" (24)
      }
    ]
    
    1 The name for your cluster infrastructure that is encoded in your Ignition config files for the cluster.
    2 Specify the infrastructure name that you extracted from the Ignition config file metadata, which has the format <cluster-name>-<random-string>.
    3 Current Red Hat Enterprise Linux CoreOS (RHCOS) AMI to use for the bootstrap node.
    4 Specify a valid AWS::EC2::Image::Id value.
    5 CIDR block to allow SSH access to the bootstrap node.
    6 Specify a CIDR block in the format x.x.x.x/16-24.
    7 The public subnet that is associated with your VPC to launch the bootstrap node into.
    8 Specify the PublicSubnetIds value from the output of the CloudFormation template for the VPC.
    9 The master security group ID (for registering temporary rules)
    10 Specify the MasterSecurityGroupId value from the output of the CloudFormation template for the security group and roles.
    11 The VPC created resources will belong to.
    12 Specify the VpcId value from the output of the CloudFormation template for the VPC.
    13 Location to fetch bootstrap Ignition config file from.
    14 Specify the S3 bucket and file name in the form s3://<bucket_name>/bootstrap.ign.
    15 Whether or not to register a network load balancer (NLB).
    16 Specify yes or no. If you specify yes, you must provide a Lambda Amazon Resource Name (ARN) value.
    17 The ARN for NLB IP target registration lambda group.
    18 Specify the RegisterNlbIpTargetsLambda value from the output of the CloudFormation template for DNS and load balancing.
    19 The ARN for external API load balancer target group.
    20 Specify the ExternalApiTargetGroupArn value from the output of the CloudFormation template for DNS and load balancing.
    21 The ARN for internal API load balancer target group.
    22 Specify the InternalApiTargetGroupArn value from the output of the CloudFormation template for DNS and load balancing.
    23 The ARN for internal service load balancer target group.
    24 Specify the InternalServiceTargetGroupArn value from the output of the CloudFormation template for DNS and load balancing.
  3. Copy the template from the CloudFormation template for the bootstrap machine section of this topic and save it as a YAML file on your computer. This template describes the bootstrap machine that your cluster requires.

  4. Launch the template:

    You must enter the command on a single line.

    $ aws cloudformation create-stack --stack-name <name> (1)
         --template-body file://<template>.yaml (2)
         --parameters file://<parameters>.json (3)
         --capabilities CAPABILITY_NAMED_IAM
    1 <name> is the name for the CloudFormation stack, such as cluster-bootstrap. You need the name of this stack if you remove the cluster.
    2 <template> is the relative path to and name of the CloudFormation template YAML file that you saved.
    3 <parameters> is the relative path to and name of the CloudFormation parameters JSON file.
  5. Confirm that the template components exist:

    $ aws cloudformation describe-stacks --stack-name <name>

    After the StackStatus displays CREATE_COMPLETE, the output displays values for the following parameters. You must provide these parameter values to the other CloudFormation templates that you run to create your cluster:

    BootstrapInstanceId

    The bootstrap Instance ID.

    BootstrapPublicIp

    The bootstrap node public IP address.

    BootstrapPrivateIp

    The bootstrap node private IP address.

CloudFormation template for the bootstrap machine

You can use the following CloudFormation template to deploy the bootstrap machine that you need for your OpenShift Container Platform cluster.

CloudFormation template for the bootstrap machine
AWSTemplateFormatVersion: 2010-09-09
Description: Template for OpenShift Cluster Bootstrap (EC2 Instance, Security Groups and IAM)

Parameters:
  InfrastructureName:
    AllowedPattern: ^([a-zA-Z][a-zA-Z0-9\-]{0,26})$
    MaxLength: 27
    MinLength: 1
    ConstraintDescription: Infrastructure name must be alphanumeric, start with a letter, and have a maximum of 27 characters.
    Description: A short, unique cluster ID used to tag cloud resources and identify items owned or used by the cluster.
    Type: String
  RhcosAmi:
    Description: Current Red Hat Enterprise Linux CoreOS AMI to use for bootstrap.
    Type: AWS::EC2::Image::Id
  AllowedBootstrapSshCidr:
    AllowedPattern: ^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(\/([0-9]|1[0-9]|2[0-9]|3[0-2]))$
    ConstraintDescription: CIDR block parameter must be in the form x.x.x.x/0-32.
    Default: 0.0.0.0/0
    Description: CIDR block to allow SSH access to the bootstrap node.
    Type: String
  PublicSubnet:
    Description: The public subnet to launch the bootstrap node into.
    Type: AWS::EC2::Subnet::Id
  MasterSecurityGroupId:
    Description: The master security group ID for registering temporary rules.
    Type: AWS::EC2::SecurityGroup::Id
  VpcId:
    Description: The VPC-scoped resources will belong to this VPC.
    Type: AWS::EC2::VPC::Id
  BootstrapIgnitionLocation:
    Default: s3://my-s3-bucket/bootstrap.ign
    Description: Ignition config file location.
    Type: String
  AutoRegisterELB:
    Default: "yes"
    AllowedValues:
    - "yes"
    - "no"
    Description: Do you want to invoke NLB registration, which requires a Lambda ARN parameter?
    Type: String
  RegisterNlbIpTargetsLambdaArn:
    Description: ARN for NLB IP target registration lambda.
    Type: String
  ExternalApiTargetGroupArn:
    Description: ARN for external API load balancer target group.
    Type: String
  InternalApiTargetGroupArn:
    Description: ARN for internal API load balancer target group.
    Type: String
  InternalServiceTargetGroupArn:
    Description: ARN for internal service load balancer target group.
    Type: String

Metadata:
  AWS::CloudFormation::Interface:
    ParameterGroups:
    - Label:
        default: "Cluster Information"
      Parameters:
      - InfrastructureName
    - Label:
        default: "Host Information"
      Parameters:
      - RhcosAmi
      - BootstrapIgnitionLocation
      - MasterSecurityGroupId
    - Label:
        default: "Network Configuration"
      Parameters:
      - VpcId
      - AllowedBootstrapSshCidr
      - PublicSubnet
    - Label:
        default: "Load Balancer Automation"
      Parameters:
      - AutoRegisterELB
      - RegisterNlbIpTargetsLambdaArn
      - ExternalApiTargetGroupArn
      - InternalApiTargetGroupArn
      - InternalServiceTargetGroupArn
    ParameterLabels:
      InfrastructureName:
        default: "Infrastructure Name"
      VpcId:
        default: "VPC ID"
      AllowedBootstrapSshCidr:
        default: "Allowed SSH Source"
      PublicSubnet:
        default: "Public Subnet"
      RhcosAmi:
        default: "Red Hat Enterprise Linux CoreOS AMI ID"
      BootstrapIgnitionLocation:
        default: "Bootstrap Ignition Source"
      MasterSecurityGroupId:
        default: "Master Security Group ID"
      AutoRegisterELB:
        default: "Use Provided ELB Automation"

Conditions:
  DoRegistration: !Equals ["yes", !Ref AutoRegisterELB]

Resources:
  BootstrapIamRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Version: "2012-10-17"
        Statement:
        - Effect: "Allow"
          Principal:
            Service:
            - "ec2.amazonaws.com"
          Action:
          - "sts:AssumeRole"
      Path: "/"
      Policies:
      - PolicyName: !Join ["-", [!Ref InfrastructureName, "bootstrap", "policy"]]
        PolicyDocument:
          Version: "2012-10-17"
          Statement:
          - Effect: "Allow"
            Action: "ec2:Describe*"
            Resource: "*"
          - Effect: "Allow"
            Action: "ec2:AttachVolume"
            Resource: "*"
          - Effect: "Allow"
            Action: "ec2:DetachVolume"
            Resource: "*"
          - Effect: "Allow"
            Action: "s3:GetObject"
            Resource: "*"

  BootstrapInstanceProfile:
    Type: "AWS::IAM::InstanceProfile"
    Properties:
      Path: "/"
      Roles:
      - Ref: "BootstrapIamRole"

  BootstrapSecurityGroup:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupDescription: Cluster Bootstrap Security Group
      SecurityGroupIngress:
      - IpProtocol: tcp
        FromPort: 22
        ToPort: 22
        CidrIp: !Ref AllowedBootstrapSshCidr
      - IpProtocol: tcp
        ToPort: 19531
        FromPort: 19531
        CidrIp: 0.0.0.0/0
      VpcId: !Ref VpcId

  BootstrapInstance:
    Type: AWS::EC2::Instance
    Properties:
      ImageId: !Ref RhcosAmi
      IamInstanceProfile: !Ref BootstrapInstanceProfile
      InstanceType: "i3.large"
      NetworkInterfaces:
      - AssociatePublicIpAddress: "true"
        DeviceIndex: "0"
        GroupSet:
        - !Ref "BootstrapSecurityGroup"
        - !Ref "MasterSecurityGroupId"
        SubnetId: !Ref "PublicSubnet"
      UserData:
        Fn::Base64: !Sub
        - '{"ignition":{"config":{"replace":{"source":"${S3Loc}","verification":{}}},"timeouts":{},"version":"2.1.0"},"networkd":{},"passwd":{},"storage":{},"systemd":{}}'
        - {
          S3Loc: !Ref BootstrapIgnitionLocation
        }

  RegisterBootstrapApiTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref ExternalApiTargetGroupArn
      TargetIp: !GetAtt BootstrapInstance.PrivateIp

  RegisterBootstrapInternalApiTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalApiTargetGroupArn
      TargetIp: !GetAtt BootstrapInstance.PrivateIp

  RegisterBootstrapInternalServiceTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalServiceTargetGroupArn
      TargetIp: !GetAtt BootstrapInstance.PrivateIp

Outputs:
  BootstrapInstanceId:
    Description: Bootstrap Instance ID.
    Value: !Ref BootstrapInstance

  BootstrapPublicIp:
    Description: The bootstrap node public IP address.
    Value: !GetAtt BootstrapInstance.PublicIp

  BootstrapPrivateIp:
    Description: The bootstrap node private IP address.
    Value: !GetAtt BootstrapInstance.PrivateIp

Creating the control plane machines in AWS

You must create the control plane machines in Amazon Web Services (AWS) for your cluster to use. The easiest way to create these nodes is to modify the provided CloudFormation template.

If you do not use the provided CloudFormation template to create your control plane nodes, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites
  • Configure an AWS account.

  • Generate the Ignition config files for your cluster.

  • Create and configure a VPC and associated subnets in AWS.

  • Create and configure DNS, load balancers, and listeners in AWS.

  • Create control plane and compute roles.

  • Create the bootstrap machine.

Procedure
  1. Create a JSON file that contains the parameter values that the template requires:

    [
      {
        "ParameterKey": "InfrastructureName", (1)
        "ParameterValue": "mycluster-<random_string>" (2)
      },
      {
        "ParameterKey": "RhcosAmi", (3)
        "ParameterValue": "ami-<random_string>" (4)
      },
      {
        "ParameterKey": "AutoRegisterDNS", (5)
        "ParameterValue": "yes" (6)
      },
      {
        "ParameterKey": "PrivateHostedZoneId", (7)
        "ParameterValue": "<random_string>" (8)
      },
      {
        "ParameterKey": "PrivateHostedZoneName", (9)
        "ParameterValue": "mycluster.example.com" (10)
      },
      {
        "ParameterKey": "Master0Subnet", (11)
        "ParameterValue": "subnet-<random_string>" (12)
      },
      {
        "ParameterKey": "Master1Subnet", (11)
        "ParameterValue": "subnet-<random_string>" (12)
      },
      {
        "ParameterKey": "Master2Subnet", (11)
        "ParameterValue": "subnet-<random_string>" (12)
      },
      {
        "ParameterKey": "MasterSecurityGroupId", (13)
        "ParameterValue": "sg-<random_string>" (14)
      },
      {
        "ParameterKey": "IgnitionLocation", (15)
        "ParameterValue": "https://api-int.<cluster_name>.<domain_name>:22623/config/master" (16)
      },
      {
        "ParameterKey": "CertificateAuthorities", (17)
        "ParameterValue": "data:text/plain;charset=utf-8;base64,ABC...xYz==" (18)
      },
      {
        "ParameterKey": "MasterInstanceProfileName", (19)
        "ParameterValue": "<roles_stack>-MasterInstanceProfile-<random_string>" (20)
      },
      {
        "ParameterKey": "MasterInstanceType", (21)
        "ParameterValue": "m4.xlarge" (22)
      },
      {
        "ParameterKey": "AutoRegisterELB", (23)
        "ParameterValue": "yes" (24)
      },
      {
        "ParameterKey": "RegisterNlbIpTargetsLambdaArn", (25)
        "ParameterValue": "arn:aws:lambda:<region>:<account_number>:function:<dns_stack_name>-RegisterNlbIpTargets-<random_string>" (26)
      },
      {
        "ParameterKey": "ExternalApiTargetGroupArn", (27)
        "ParameterValue": "arn:aws:elasticloadbalancing:<region>:<account_number>:targetgroup/<dns_stack_name>-Exter-<random_string>" (28)
      },
      {
        "ParameterKey": "InternalApiTargetGroupArn", (29)
        "ParameterValue": "arn:aws:elasticloadbalancing:<region>:<account_number>:targetgroup/<dns_stack_name>-Inter-<random_string>" (30)
      },
      {
        "ParameterKey": "InternalServiceTargetGroupArn", (31)
        "ParameterValue": "arn:aws:elasticloadbalancing:<region>:<account_number>:targetgroup/<dns_stack_name>-Inter-<random_string>" (32)
      }
    ]
    1 The name for your cluster infrastructure that is encoded in your Ignition config files for the cluster.
    2 Specify the infrastructure name that you extracted from the Ignition config file metadata, which has the format <cluster-name>-<random-string>.
    3 CurrentRed Hat Enterprise Linux CoreOS (RHCOS) AMI to use for the control plane machines.
    4 Specify an AWS::EC2::Image::Id value.
    5 Whether or not to perform DNS etcd registration.
    6 Specify yes or no. If you specify yes, you must provide hosted zone information.
    7 The Route 53 private zone ID to register the etcd targets with.
    8 Specify the PrivateHostedZoneId value from the output of the CloudFormation template for DNS and load balancing.
    9 The Route 53 zone to register the targets with.
    10 Specify <cluster_name>.<domain_name> where <domain_name> is the Route 53 base domain that you used when you generated install-config.yaml file for the cluster. Do not include the trailing period (.) that is displayed in the AWS console.
    11 A subnet, preferably private, to launch the control plane machines on.
    12 Specify a subnet from the PrivateSubnets value from the output of the CloudFormation template for DNS and load balancing.
    13 The master security group ID to associate with master nodes.
    14 Specify the MasterSecurityGroupId value from the output of the CloudFormation template for the security group and roles.
    15 The location to fetch control plane Ignition config file from.
    16 Specify the generated Ignition config file location, https://api-int.<cluster_name>.<domain_name>:22623/config/master.
    17 The base64 encoded certificate authority string to use.
    18 Specify the value from the master.ign file that is in the installation directory. This value is the long string with the format data:text/plain;charset=utf-8;base64,ABC…​xYz==.
    19 The IAM profile to associate with master nodes.
    20 Specify the MasterInstanceProfile parameter value from the output of the CloudFormation template for the security group and roles.
    21 The type of AWS instance to use for the control plane machines.
    22 Allowed values:
    • m4.xlarge

    • m4.2xlarge

    • m4.4xlarge

    • m4.8xlarge

    • m4.10xlarge

    • m4.16xlarge

    • c4.2xlarge

    • c4.4xlarge

    • c4.8xlarge

    • r4.xlarge

    • r4.2xlarge

    • r4.4xlarge

    • r4.8xlarge

    • r4.16xlarge

      If m4 instance types are not available in your region, such as with eu-west-3, specify an m5 type, such as m5.xlarge, instead.

    23 Whether or not to register a network load balancer (NLB).
    24 Specify yes or no. If you specify yes, you must provide a Lambda Amazon Resource Name (ARN) value.
    25 The ARN for NLB IP target registration lambda group.
    26 Specify the RegisterNlbIpTargetsLambda value from the output of the CloudFormation template for DNS and load balancing.
    27 The ARN for external API load balancer target group.
    28 Specify the ExternalApiTargetGroupArn value from the output of the CloudFormation template for DNS and load balancing.
    29 The ARN for internal API load balancer target group.
    30 Specify the InternalApiTargetGroupArn value from the output of the CloudFormation template for DNS and load balancing.
    31 The ARN for internal service load balancer target group.
    32 Specify the InternalServiceTargetGroupArn value from the output of the CloudFormation template for DNS and load balancing.
  2. Copy the template from the CloudFormation template for control plane machines section of this topic and save it as a YAML file on your computer. This template describes the control plane machines that your cluster requires.

  3. If you specified an m5 instance type as the value for MasterInstanceType, add that instance type to the MasterInstanceType.AllowedValues parameter in the CloudFormation template.

  4. Launch the template:

    You must enter the command on a single line.

    $ aws cloudformation create-stack --stack-name <name> (1)
         --template-body file://<template>.yaml (2)
         --parameters file://<parameters>.json (3)
    1 <name> is the name for the CloudFormation stack, such as cluster-control-plane. You need the name of this stack if you remove the cluster.
    2 <template> is the relative path to and name of the CloudFormation template YAML file that you saved.
    3 <parameters> is the relative path to and name of the CloudFormation parameters JSON file.
  5. Confirm that the template components exist:

    $ aws cloudformation describe-stacks --stack-name <name>

CloudFormation template for control plane machines

You can use the following CloudFormation template to deploy the control plane machines that you need for your OpenShift Container Platform cluster.

CloudFormation template for control plane machines
AWSTemplateFormatVersion: 2010-09-09
Description: Template for OpenShift Cluster Node Launch (EC2 master instances)

Parameters:
  InfrastructureName:
    AllowedPattern: ^([a-zA-Z][a-zA-Z0-9\-]{0,26})$
    MaxLength: 27
    MinLength: 1
    ConstraintDescription: Infrastructure name must be alphanumeric, start with a letter, and have a maximum of 27 characters.
    Description: A short, unique cluster ID used to tag nodes for the kubelet cloud provider.
    Type: String
  RhcosAmi:
    Description: Current Red Hat Enterprise Linux CoreOS AMI to use for bootstrap.
    Type: AWS::EC2::Image::Id
  AutoRegisterDNS:
    Default: "yes"
    AllowedValues:
    - "yes"
    - "no"
    Description: Do you want to invoke DNS etcd registration, which requires Hosted Zone information?
    Type: String
  PrivateHostedZoneId:
    Description: The Route53 private zone ID to register the etcd targets with, such as Z21IXYZABCZ2A4.
    Type: String
  PrivateHostedZoneName:
    Description: The Route53 zone to register the targets with, such as cluster.example.com. Omit the trailing period.
    Type: String
  Master0Subnet:
    Description: The subnets, recommend private, to launch the master nodes into.
    Type: AWS::EC2::Subnet::Id
  Master1Subnet:
    Description: The subnets, recommend private, to launch the master nodes into.
    Type: AWS::EC2::Subnet::Id
  Master2Subnet:
    Description: The subnets, recommend private, to launch the master nodes into.
    Type: AWS::EC2::Subnet::Id
  MasterSecurityGroupId:
    Description: The master security group ID to associate with master nodes.
    Type: AWS::EC2::SecurityGroup::Id
  IgnitionLocation:
    Default: https://api-int.$CLUSTER_NAME.$DOMAIN:22623/config/master
    Description: Ignition config file location.
    Type: String
  CertificateAuthorities:
    Default: data:text/plain;charset=utf-8;base64,ABC...xYz==
    Description: Base64 encoded certificate authority string to use.
    Type: String
  MasterInstanceProfileName:
    Description: IAM profile to associate with master nodes.
    Type: String
  MasterInstanceType:
    Default: m4.xlarge
    Type: String
    AllowedValues:
    - "m4.xlarge"
    - "m4.2xlarge"
    - "m4.4xlarge"
    - "m4.8xlarge"
    - "m4.10xlarge"
    - "m4.16xlarge"
    - "c4.2xlarge"
    - "c4.4xlarge"
    - "c4.8xlarge"
    - "r4.xlarge"
    - "r4.2xlarge"
    - "r4.4xlarge"
    - "r4.8xlarge"
    - "r4.16xlarge"
  AutoRegisterELB:
    Default: "yes"
    AllowedValues:
    - "yes"
    - "no"
    Description: Do you want to invoke NLB registration, which requires a Lambda ARN parameter?
    Type: String
  RegisterNlbIpTargetsLambdaArn:
    Description: ARN for NLB IP target registration lambda. Supply the value from the cluster infrastructure or select "no" for AutoRegisterELB.
    Type: String
  ExternalApiTargetGroupArn:
    Description: ARN for external API load balancer target group. Supply the value from the cluster infrastructure or select "no" for AutoRegisterELB.
    Type: String
  InternalApiTargetGroupArn:
    Description: ARN for internal API load balancer target group. Supply the value from the cluster infrastructure or select "no" for AutoRegisterELB.
    Type: String
  InternalServiceTargetGroupArn:
    Description: ARN for internal service load balancer target group. Supply the value from the cluster infrastructure or select "no" for AutoRegisterELB.
    Type: String

Metadata:
  AWS::CloudFormation::Interface:
    ParameterGroups:
    - Label:
        default: "Cluster Information"
      Parameters:
      - InfrastructureName
    - Label:
        default: "Host Information"
      Parameters:
      - MasterInstanceType
      - RhcosAmi
      - IgnitionLocation
      - CertificateAuthorities
      - MasterSecurityGroupId
      - MasterInstanceProfileName
    - Label:
        default: "Network Configuration"
      Parameters:
      - VpcId
      - AllowedBootstrapSshCidr
      - Master0Subnet
      - Master1Subnet
      - Master2Subnet
    - Label:
        default: "DNS"
      Parameters:
      - AutoRegisterDNS
      - PrivateHostedZoneName
      - PrivateHostedZoneId
    - Label:
        default: "Load Balancer Automation"
      Parameters:
      - AutoRegisterELB
      - RegisterNlbIpTargetsLambdaArn
      - ExternalApiTargetGroupArn
      - InternalApiTargetGroupArn
      - InternalServiceTargetGroupArn
    ParameterLabels:
      InfrastructureName:
        default: "Infrastructure Name"
      VpcId:
        default: "VPC ID"
      Master0Subnet:
        default: "Master-0 Subnet"
      Master1Subnet:
        default: "Master-1 Subnet"
      Master2Subnet:
        default: "Master-2 Subnet"
      MasterInstanceType:
        default: "Master Instance Type"
      MasterInstanceProfileName:
        default: "Master Instance Profile Name"
      RhcosAmi:
        default: "Red Hat Enterprise Linux CoreOS AMI ID"
      BootstrapIgnitionLocation:
        default: "Master Ignition Source"
      CertificateAuthorities:
        default: "Ignition CA String"
      MasterSecurityGroupId:
        default: "Master Security Group ID"
      AutoRegisterDNS:
        default: "Use Provided DNS Automation"
      AutoRegisterELB:
        default: "Use Provided ELB Automation"
      PrivateHostedZoneName:
        default: "Private Hosted Zone Name"
      PrivateHostedZoneId:
        default: "Private Hosted Zone ID"

Conditions:
  DoRegistration: !Equals ["yes", !Ref AutoRegisterELB]
  DoDns: !Equals ["yes", !Ref AutoRegisterDNS]

Resources:
  Master0:
    Type: AWS::EC2::Instance
    Properties:
      ImageId: !Ref RhcosAmi
      BlockDeviceMappings:
      - DeviceName: /dev/xvda
        Ebs:
          VolumeSize: "120"
          VolumeType: "gp2"
      IamInstanceProfile: !Ref MasterInstanceProfileName
      InstanceType: !Ref MasterInstanceType
      NetworkInterfaces:
      - AssociatePublicIpAddress: "false"
        DeviceIndex: "0"
        GroupSet:
        - !Ref "MasterSecurityGroupId"
        SubnetId: !Ref "Master0Subnet"
      UserData:
        Fn::Base64: !Sub
        - '{"ignition":{"config":{"append":[{"source":"${SOURCE}","verification":{}}]},"security":{"tls":{"certificateAuthorities":[{"source":"${CA_BUNDLE}","verification":{}}]}},"timeouts":{},"version":"2.2.0"},"networkd":{},"passwd":{},"storage":{},"systemd":{}}'
        - {
          SOURCE: !Ref IgnitionLocation,
          CA_BUNDLE: !Ref CertificateAuthorities,
        }
      Tags:
      - Key: !Join ["", ["kubernetes.io/cluster/", !Ref InfrastructureName]]
        Value: "shared"

  RegisterMaster0:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref ExternalApiTargetGroupArn
      TargetIp: !GetAtt Master0.PrivateIp

  RegisterMaster0InternalApiTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalApiTargetGroupArn
      TargetIp: !GetAtt Master0.PrivateIp

  RegisterMaster0InternalServiceTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalServiceTargetGroupArn
      TargetIp: !GetAtt Master0.PrivateIp

  Master1:
    Type: AWS::EC2::Instance
    Properties:
      ImageId: !Ref RhcosAmi
      BlockDeviceMappings:
      - DeviceName: /dev/xvda
        Ebs:
          VolumeSize: "120"
          VolumeType: "gp2"
      IamInstanceProfile: !Ref MasterInstanceProfileName
      InstanceType: !Ref MasterInstanceType
      NetworkInterfaces:
      - AssociatePublicIpAddress: "false"
        DeviceIndex: "0"
        GroupSet:
        - !Ref "MasterSecurityGroupId"
        SubnetId: !Ref "Master1Subnet"
      UserData:
        Fn::Base64: !Sub
        - '{"ignition":{"config":{"append":[{"source":"${SOURCE}","verification":{}}]},"security":{"tls":{"certificateAuthorities":[{"source":"${CA_BUNDLE}","verification":{}}]}},"timeouts":{},"version":"2.2.0"},"networkd":{},"passwd":{},"storage":{},"systemd":{}}'
        - {
          SOURCE: !Ref IgnitionLocation,
          CA_BUNDLE: !Ref CertificateAuthorities,
        }
      Tags:
      - Key: !Join ["", ["kubernetes.io/cluster/", !Ref InfrastructureName]]
        Value: "shared"

  RegisterMaster1:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref ExternalApiTargetGroupArn
      TargetIp: !GetAtt Master1.PrivateIp

  RegisterMaster1InternalApiTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalApiTargetGroupArn
      TargetIp: !GetAtt Master1.PrivateIp

  RegisterMaster1InternalServiceTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalServiceTargetGroupArn
      TargetIp: !GetAtt Master1.PrivateIp

  Master2:
    Type: AWS::EC2::Instance
    Properties:
      ImageId: !Ref RhcosAmi
      BlockDeviceMappings:
      - DeviceName: /dev/xvda
        Ebs:
          VolumeSize: "120"
          VolumeType: "gp2"
      IamInstanceProfile: !Ref MasterInstanceProfileName
      InstanceType: !Ref MasterInstanceType
      NetworkInterfaces:
      - AssociatePublicIpAddress: "false"
        DeviceIndex: "0"
        GroupSet:
        - !Ref "MasterSecurityGroupId"
        SubnetId: !Ref "Master2Subnet"
      UserData:
        Fn::Base64: !Sub
        - '{"ignition":{"config":{"append":[{"source":"${SOURCE}","verification":{}}]},"security":{"tls":{"certificateAuthorities":[{"source":"${CA_BUNDLE}","verification":{}}]}},"timeouts":{},"version":"2.2.0"},"networkd":{},"passwd":{},"storage":{},"systemd":{}}'
        - {
          SOURCE: !Ref IgnitionLocation,
          CA_BUNDLE: !Ref CertificateAuthorities,
        }
      Tags:
      - Key: !Join ["", ["kubernetes.io/cluster/", !Ref InfrastructureName]]
        Value: "shared"

  RegisterMaster2:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref ExternalApiTargetGroupArn
      TargetIp: !GetAtt Master2.PrivateIp

  RegisterMaster2InternalApiTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalApiTargetGroupArn
      TargetIp: !GetAtt Master2.PrivateIp

  RegisterMaster2InternalServiceTarget:
    Condition: DoRegistration
    Type: Custom::NLBRegister
    Properties:
      ServiceToken: !Ref RegisterNlbIpTargetsLambdaArn
      TargetArn: !Ref InternalServiceTargetGroupArn
      TargetIp: !GetAtt Master2.PrivateIp

  EtcdSrvRecords:
    Condition: DoDns
    Type: AWS::Route53::RecordSet
    Properties:
      HostedZoneId: !Ref PrivateHostedZoneId
      Name: !Join [".", ["_etcd-server-ssl._tcp", !Ref PrivateHostedZoneName]]
      ResourceRecords:
      - !Join [
        " ",
        ["0 10 2380", !Join [".", ["etcd-0", !Ref PrivateHostedZoneName]]],
      ]
      - !Join [
        " ",
        ["0 10 2380", !Join [".", ["etcd-1", !Ref PrivateHostedZoneName]]],
      ]
      - !Join [
        " ",
        ["0 10 2380", !Join [".", ["etcd-2", !Ref PrivateHostedZoneName]]],
      ]
      TTL: 60
      Type: SRV

  Etcd0Record:
    Condition: DoDns
    Type: AWS::Route53::RecordSet
    Properties:
      HostedZoneId: !Ref PrivateHostedZoneId
      Name: !Join [".", ["etcd-0", !Ref PrivateHostedZoneName]]
      ResourceRecords:
      - !GetAtt Master0.PrivateIp
      TTL: 60
      Type: A

  Etcd1Record:
    Condition: DoDns
    Type: AWS::Route53::RecordSet
    Properties:
      HostedZoneId: !Ref PrivateHostedZoneId
      Name: !Join [".", ["etcd-1", !Ref PrivateHostedZoneName]]
      ResourceRecords:
      - !GetAtt Master1.PrivateIp
      TTL: 60
      Type: A

  Etcd2Record:
    Condition: DoDns
    Type: AWS::Route53::RecordSet
    Properties:
      HostedZoneId: !Ref PrivateHostedZoneId
      Name: !Join [".", ["etcd-2", !Ref PrivateHostedZoneName]]
      ResourceRecords:
      - !GetAtt Master2.PrivateIp
      TTL: 60
      Type: A

Outputs:
  PrivateIPs:
    Description: The control-plane node private IP addresses.
    Value:
      !Join [
        ",",
        [!GetAtt Master0.PrivateIp, !GetAtt Master1.PrivateIp, !GetAtt Master2.PrivateIp]
      ]

Initializing the bootstrap node on AWS with user-provisioned infrastructure

After you create all of the required infrastructure in Amazon Web Services (AWS), you can install the cluster.

Prerequisites
  • Configure an AWS account.

  • Generate the Ignition config files for your cluster.

  • Create and configure a VPC and associated subnets in AWS.

  • Create and configure DNS, load balancers, and listeners in AWS.

  • Create control plane and compute roles.

  • Create the bootstrap machine.

  • Create the control plane machines.

  • If you plan to manually manage the worker machines, create the worker machines.

Procedure
  1. Change to the directory that contains the installation program and run the following command:

    $ ./openshift-install wait-for bootstrap-complete --dir=<installation_directory> \ (1)
        --log-level=info (2)
    
    1 For <installation_directory>, specify the path to the directory that you stored the installation files in.
    2 To view different installation details, specify warn, debug, or error instead of info.

    If the command exits without a FATAL warning, your production control plane has initialized.

Creating the worker nodes in AWS

You can create worker nodes in Amazon Web Services (AWS) for your cluster to use. The easiest way to manually create these nodes is to modify the provided CloudFormation template.

The CloudFormation template creates a stack that represents one worker machine. You must create a stack for each worker machine.

If you do not use the provided CloudFormation template to create your worker nodes, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites
  • Configure an AWS account.

  • Generate the Ignition config files for your cluster.

  • Create and configure a VPC and associated subnets in AWS.

  • Create and configure DNS, load balancers, and listeners in AWS.

  • Create control plane and compute roles.

  • Create the bootstrap machine.

  • Create the control plane machines.

Procedure
  1. Create a JSON file that contains the parameter values that the CloudFormation template requires:

    [
      {
        "ParameterKey": "InfrastructureName", (1)
        "ParameterValue": "mycluster-<random_string>" (2)
      },
      {
        "ParameterKey": "RhcosAmi", (3)
        "ParameterValue": "ami-<random_string>" (4)
      },
      {
        "ParameterKey": "Subnet", (5)
        "ParameterValue": "subnet-<random_string>" (6)
      },
      {
        "ParameterKey": "WorkerSecurityGroupId", (7)
        "ParameterValue": "sg-<random_string>" (8)
      },
      {
        "ParameterKey": "IgnitionLocation", (9)
        "ParameterValue": "https://api-int.<cluster_name>.<domain_name>:22623/config/worker" (10)
      },
      {
        "ParameterKey": "CertificateAuthorities", (11)
        "ParameterValue": "" (12)
      },
      {
        "ParameterKey": "WorkerInstanceProfileName", (13)
        "ParameterValue": "" (14)
      },
      {
        "ParameterKey": "WorkerInstanceType", (15)
        "ParameterValue": "m4.large" (16)
      }
    ]
    1 The name for your cluster infrastructure that is encoded in your Ignition config files for the cluster.
    2 Specify the infrastructure name that you extracted from the Ignition config file metadata, which has the format <cluster-name>-<random-string>.
    3 Current Red Hat Enterprise Linux CoreOS (RHCOS) AMI to use for the worker nodes.
    4 Specify an AWS::EC2::Image::Id value.
    5 A subnet, preferably private, to launch the worker nodes on.
    6 Specify a subnet from the PrivateSubnets value from the output of the CloudFormation template for DNS and load balancing.
    7 The worker security group ID to associate with worker nodes.
    8 Specify the WorkerSecurityGroupId value from the output of the CloudFormation template for the security group and roles.
    9 The location to fetch bootstrap Ignition config file from.
    10 Specify the generated Ignition config location, https://api-int.<cluster_name>.<domain_name>:22623/config/worker.
    11 Base64 encoded certificate authority string to use.
    12 Specify the value from the worker.ign file that is in the installation directory. This value is the long string with the format data:text/plain;charset=utf-8;base64,ABC…​xYz==.
    13 The IAM profile to associate with worker nodes.
    14 Specify the WorkerInstanceProfile parameter value from the output of the CloudFormation template for the security group and roles.
    15 The type of AWS instance to use for the control plane machines.
    16 Allowed values:
    • m4.large

    • m4.xlarge

    • m4.2xlarge

    • m4.4xlarge

    • m4.8xlarge

    • m4.10xlarge

    • m4.16xlarge

    • c4.large

    • c4.xlarge

    • c4.2xlarge

    • c4.4xlarge

    • c4.8xlarge

    • r4.large

    • r4.xlarge

    • r4.2xlarge

    • r4.4xlarge

    • r4.8xlarge

    • r4.16xlarge

      If m4 instance types are not available in your region, such as with eu-west-3, use m5 types instead.

  2. Copy the template from the CloudFormation template for worker machines section of this topic and save it as a YAML file on your computer. This template describes the networking objects and load balancers that your cluster requires.

  3. If you specified an m5 instance type as the value for WorkerInstanceType, add that instance type to the WorkerInstanceType.AllowedValues parameter in the CloudFormation template.

  4. Create a worker stack.

    1. Launch the template:

      You must enter the command on a single line.

      $ aws cloudformation create-stack --stack-name <name> (1)
           --template-body file://<template>.yaml \ (2)
           --parameters file://<parameters>.json (3)
      1 <name> is the name for the CloudFormation stack, such as cluster-workers. You need the name of this stack if you remove the cluster.
      2 <template> is the relative path to and name of the CloudFormation template YAML file that you saved.
      3 <parameters> is the relative path to and name of the CloudFormation parameters JSON file.
    2. Confirm that the template components exist:

      $ aws cloudformation describe-stacks --stack-name <name>
  5. Continue to create worker stacks until you have created enough worker machines for your cluster.

    You must create at least two worker machines, so you must create at least two stacks that use this CloudFormation template.

CloudFormation template for worker machines

You can use the following CloudFormation template to deploy the worker machines that you need for your OpenShift Container Platform cluster.

CloudFormation template for worker machines
AWSTemplateFormatVersion: 2010-09-09
Description: Template for OpenShift Cluster Node Launch (EC2 worker instance)

Parameters:
  InfrastructureName:
    AllowedPattern: ^([a-zA-Z][a-zA-Z0-9\-]{0,26})$
    MaxLength: 27
    MinLength: 1
    ConstraintDescription: Infrastructure name must be alphanumeric, start with a letter, and have a maximum of 27 characters.
    Description: A short, unique cluster ID used to tag nodes for the kubelet cloud provider.
    Type: String
  RhcosAmi:
    Description: Current Red Hat Enterprise Linux CoreOS AMI to use for bootstrap.
    Type: AWS::EC2::Image::Id
  Subnet:
    Description: The subnets, recommend private, to launch the master nodes into.
    Type: AWS::EC2::Subnet::Id
  WorkerSecurityGroupId:
    Description: The master security group ID to associate with master nodes.
    Type: AWS::EC2::SecurityGroup::Id
  IgnitionLocation:
    Default: https://api-int.$CLUSTER_NAME.$DOMAIN:22623/config/worker
    Description: Ignition config file location.
    Type: String
  CertificateAuthorities:
    Default: data:text/plain;charset=utf-8;base64,ABC...xYz==
    Description: Base64 encoded certificate authority string to use.
    Type: String
  WorkerInstanceProfileName:
    Description: IAM profile to associate with master nodes.
    Type: String
  WorkerInstanceType:
    Default: m4.large
    Type: String
    AllowedValues:
    - "m4.large"
    - "m4.xlarge"
    - "m4.2xlarge"
    - "m4.4xlarge"
    - "m4.8xlarge"
    - "m4.10xlarge"
    - "m4.16xlarge"
    - "c4.large"
    - "c4.xlarge"
    - "c4.2xlarge"
    - "c4.4xlarge"
    - "c4.8xlarge"
    - "r4.large"
    - "r4.xlarge"
    - "r4.2xlarge"
    - "r4.4xlarge"
    - "r4.8xlarge"
    - "r4.16xlarge"

Metadata:
  AWS::CloudFormation::Interface:
    ParameterGroups:
    - Label:
        default: "Cluster Information"
      Parameters:
      - InfrastructureName
    - Label:
        default: "Host Information"
      Parameters:
      - WorkerInstanceType
      - RhcosAmi
      - IgnitionLocation
      - CertificateAuthorities
      - WorkerSecurityGroupId
      - WorkerInstanceProfileName
    - Label:
        default: "Network Configuration"
      Parameters:
      - Subnet
    ParameterLabels:
      Subnet:
        default: "Subnet"
      InfrastructureName:
        default: "Infrastructure Name"
      WorkerInstanceType:
        default: "Worker Instance Type"
      WorkerInstanceProfileName:
        default: "Worker Instance Profile Name"
      RhcosAmi:
        default: "Red Hat Enterprise Linux CoreOS AMI ID"
      IgnitionLocation:
        default: "Worker Ignition Source"
      CertificateAuthorities:
        default: "Ignition CA String"
      WorkerSecurityGroupId:
        default: "Worker Security Group ID"

Resources:
  Worker0:
    Type: AWS::EC2::Instance
    Properties:
      ImageId: !Ref RhcosAmi
      BlockDeviceMappings:
      - DeviceName: /dev/xvda
        Ebs:
          VolumeSize: "120"
          VolumeType: "gp2"
      IamInstanceProfile: !Ref WorkerInstanceProfileName
      InstanceType: !Ref WorkerInstanceType
      NetworkInterfaces:
      - AssociatePublicIpAddress: "false"
        DeviceIndex: "0"
        GroupSet:
        - !Ref "WorkerSecurityGroupId"
        SubnetId: !Ref "Subnet"
      UserData:
        Fn::Base64: !Sub
        - '{"ignition":{"config":{"append":[{"source":"${SOURCE}","verification":{}}]},"security":{"tls":{"certificateAuthorities":[{"source":"${CA_BUNDLE}","verification":{}}]}},"timeouts":{},"version":"2.2.0"},"networkd":{},"passwd":{},"storage":{},"systemd":{}}'
        - {
          SOURCE: !Ref IgnitionLocation,
          CA_BUNDLE: !Ref CertificateAuthorities,
        }
      Tags:
      - Key: !Join ["", ["kubernetes.io/cluster/", !Ref InfrastructureName]]
        Value: "shared"

Outputs:
  PrivateIP:
    Description: The compute node private IP address.
    Value: !GetAtt Worker0.PrivateIp

Logging in to the cluster

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.

Prerequisites
  • Deploy an OpenShift Container Platform cluster.

  • Install the oc CLI.

Procedure
  1. Export the kubeadmin credentials:

    $ export KUBECONFIG=<installation_directory>/auth/kubeconfig (1)
    1 For <installation_directory>, specify the path to the directory that you stored the installation files in.
  2. Verify you can run oc commands successfully using the exported configuration:

    $ oc whoami
    Example output
    system:admin

Approving the certificate signing requests for your machines

When you add machines to a cluster, two pending certificate signing requests (CSRs) are generated for each machine that you added. You must confirm that these CSRs are approved or, if necessary, approve them yourself. The client requests must be approved first, followed by the server requests.

Prerequisites
  • You added machines to your cluster.

Procedure
  1. Confirm that the cluster recognizes the machines:

    $ oc get nodes
    Example output
    NAME      STATUS    ROLES   AGE  VERSION
    master-0  Ready     master  63m  v1.18.3
    master-1  Ready     master  63m  v1.18.3
    master-2  Ready     master  64m  v1.18.3
    worker-0  NotReady  worker  76s  v1.18.3
    worker-1  NotReady  worker  70s  v1.18.3

    The output lists all of the machines that you created.

  2. Review the pending CSRs and ensure that you see the client requests with the Pending or Approved status for each machine that you added to the cluster:

    $ oc get csr
    Example output
    NAME        AGE     REQUESTOR                                                                   CONDITION
    csr-8b2br   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
    csr-8vnps   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
    ...

    In this example, two machines are joining the cluster. You might see more approved CSRs in the list.

  3. If the CSRs were not approved, after all of the pending CSRs for the machines you added are in Pending status, approve the CSRs for your cluster machines:

    Because the CSRs rotate automatically, approve your CSRs within an hour of adding the machines to the cluster. If you do not approve them within an hour, the certificates will rotate, and more than two certificates will be present for each node. You must approve all of these certificates. Once the client CSR is approved, the Kubelet creates a secondary CSR for the serving certificate, which requires manual approval. Then, subsequent serving certificate renewal requests are automatically approved by the machine-approver if the Kubelet requests a new certificate with identical parameters.

    • To approve them individually, run the following command for each valid CSR:

      $ oc adm certificate approve <csr_name> (1)
      1 <csr_name> is the name of a CSR from the list of current CSRs.
    • To approve all pending CSRs, run the following command:

      $ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs --no-run-if-empty oc adm certificate approve
  4. Now that your client requests are approved, you must review the server requests for each machine that you added to the cluster:

    $ oc get csr
    Example output
    NAME        AGE     REQUESTOR                                                                   CONDITION
    csr-bfd72   5m26s   system:node:ip-10-0-50-126.us-east-2.compute.internal                       Pending
    csr-c57lv   5m26s   system:node:ip-10-0-95-157.us-east-2.compute.internal                       Pending
    ...
  5. If the remaining CSRs are not approved, and are in the Pending status, approve the CSRs for your cluster machines:

    • To approve them individually, run the following command for each valid CSR:

      $ oc adm certificate approve <csr_name> (1)
      1 <csr_name> is the name of a CSR from the list of current CSRs.
    • To approve all pending CSRs, run the following command:

      $ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve
  6. After all client and server CSRs have been approved, the machines have the Ready status. Verify this by running the following command:

    $ oc get nodes
    Example output
    NAME      STATUS    ROLES   AGE  VERSION
    master-0  Ready     master  73m  v1.20.0
    master-1  Ready     master  73m  v1.20.0
    master-2  Ready     master  74m  v1.20.0
    worker-0  Ready     worker  11m  v1.20.0
    worker-1  Ready     worker  11m  v1.20.0

    It can take a few minutes after approval of the server CSRs for the machines to transition to the Ready status.

Additional information

Initial Operator configuration

After the control plane initializes, you must immediately configure some Operators so that they all become available.

Prerequisites
  • Your control plane has initialized.

Procedure
  1. Watch the cluster components come online:

    $ watch -n5 oc get clusteroperators
    Example output
    NAME                                 VERSION   AVAILABLE   PROGRESSING   DEGRADED   SINCE
    authentication                       4.5.4     True        False         False      69s
    cloud-credential                     4.5.4     True        False         False      12m
    cluster-autoscaler                   4.5.4     True        False         False      11m
    console                              4.5.4     True        False         False      46s
    dns                                  4.5.4     True        False         False      11m
    image-registry                       4.5.4     True        False         False      5m26s
    ingress                              4.5.4     True        False         False      5m36s
    kube-apiserver                       4.5.4     True        False         False      8m53s
    kube-controller-manager              4.5.4     True        False         False      7m24s
    kube-scheduler                       4.5.4     True        False         False      12m
    machine-api                          4.5.4     True        False         False      12m
    machine-config                       4.5.4     True        False         False      7m36s
    marketplace                          4.5.4     True        False         False      7m54m
    monitoring                           4.5.4     True        False         False      7h54s
    network                              4.5.4     True        False         False      5m9s
    node-tuning                          4.5.4     True        False         False      11m
    openshift-apiserver                  4.5.4     True        False         False      11m
    openshift-controller-manager         4.5.4     True        False         False      5m943s
    openshift-samples                    4.5.4     True        False         False      3m55s
    operator-lifecycle-manager           4.5.4     True        False         False      11m
    operator-lifecycle-manager-catalog   4.5.4     True        False         False      11m
    service-ca                           4.5.4     True        False         False      11m
    service-catalog-apiserver            4.5.4     True        False         False      5m26s
    service-catalog-controller-manager   4.5.4     True        False         False      5m25s
    storage                              4.5.4     True        False         False      5m30s
  2. Configure the Operators that are not available.

Image registry storage configuration

Amazon Web Services provides default storage, which means the Image Registry Operator is available after installation. However, if the Registry Operator cannot create an S3 bucket and automatically configure storage, you must manually configure registry storage.

Instructions are shown for configuring a persistent volume, which is required for production clusters. Where applicable, instructions are shown for configuring an empty directory as the storage location, which is available for only non-production clusters.

Additional instructions are provided for allowing the image registry to use block storage types by using the Recreate rollout strategy during upgrades.

Configuring registry storage for AWS with user-provisioned infrastructure

During installation, your cloud credentials are sufficient to create an Amazon S3 bucket and the Registry Operator will automatically configure storage.

If the Registry Operator cannot create an S3 bucket and automatically configure storage, you can create an S3 bucket and configure storage with the following procedure.

Prerequisites
  • A cluster on AWS with user-provisioned infrastructure.

  • For Amazon S3 storage, the secret is expected to contain two keys:

    • REGISTRY_STORAGE_S3_ACCESSKEY

    • REGISTRY_STORAGE_S3_SECRETKEY

Procedure

Use the following procedure if the Registry Operator cannot create an S3 bucket and automatically configure storage.

  1. Set up a Bucket Lifecycle Policy to abort incomplete multipart uploads that are one day old.

  2. Fill in the storage configuration in configs.imageregistry.operator.openshift.io/cluster:

    $ oc edit configs.imageregistry.operator.openshift.io/cluster
    Example configuration
    storage:
      s3:
        bucket: <bucket-name>
        region: <region-name>

To secure your registry images in AWS, block public access to the S3 bucket.

Configuring storage for the image registry in non-production clusters

You must configure storage for the Image Registry Operator. For non-production clusters, you can set the image registry to an empty directory. If you do so, all images are lost if you restart the registry.

Procedure
  1. To set the image registry storage to an empty directory:

    $ oc patch configs.imageregistry.operator.openshift.io cluster --type merge --patch '{"spec":{"storage":{"emptyDir":{}}}}'

    Configure this option for only non-production clusters.

    If you run this command before the Image Registry Operator initializes its components, the oc patch command fails with the following error:

    Error from server (NotFound): configs.imageregistry.operator.openshift.io "cluster" not found

    Wait a few minutes and run the command again.

  2. Ensure that your registry is set to managed to enable building and pushing of images.

    • Run:

      $ oc edit configs.imageregistry/cluster

      Then, change the line

      managementState: Removed

      to

      managementState: Managed

Deleting the bootstrap resources

After you complete the initial Operator configuration for the cluster, remove the bootstrap resources from Amazon Web Services (AWS).

Prerequisites
  • You completed the initial Operator configuration for your cluster.

Procedure
  1. Delete the bootstrap resources. If you used the CloudFormation template, delete its stack:

    $ aws cloudformation delete-stack --stack-name <name> (1)
    1 <name> is the name of your bootstrap stack.

Creating the Ingress DNS Records

If you removed the DNS Zone configuration, manually create DNS records that point to the Ingress load balancer. You can create either a wildcard record or specific records. While the following procedure uses A records, you can use other record types that you require, such as CNAME or alias.

Prerequisites
Procedure
  1. Determine the routes to create.

    • To create a wildcard record, use *.apps.<cluster_name>.<domain_name>, where <cluster_name> is your cluster name, and <domain_name> is the Route 53 base domain for your OpenShift Container Platform cluster.

    • To create specific records, you must create a record for each route that your cluster uses, as shown in the output of the following command:

      $ oc get --all-namespaces -o jsonpath='{range .items[*]}{range .status.ingress[*]}{.host}{"\n"}{end}{end}' routes
      Example output
      oauth-openshift.apps.<cluster_name>.<domain_name>
      console-openshift-console.apps.<cluster_name>.<domain_name>
      downloads-openshift-console.apps.<cluster_name>.<domain_name>
      alertmanager-main-openshift-monitoring.apps.<cluster_name>.<domain_name>
      grafana-openshift-monitoring.apps.<cluster_name>.<domain_name>
      prometheus-k8s-openshift-monitoring.apps.<cluster_name>.<domain_name>
  2. Retrieve the Ingress Operator load balancer status and note the value of the external IP address that it uses, which is shown in the EXTERNAL-IP column:

    $ oc -n openshift-ingress get service router-default
    Example output
    NAME             TYPE           CLUSTER-IP      EXTERNAL-IP                            PORT(S)                      AGE
    router-default   LoadBalancer   172.30.62.215   ab3...28.us-east-2.elb.amazonaws.com   80:31499/TCP,443:30693/TCP   5m
  3. Locate the hosted zone ID for the load balancer:

    $ aws elb describe-load-balancers | jq -r '.LoadBalancerDescriptions[] | select(.DNSName == "<external_ip>").CanonicalHostedZoneNameID' (1)
    1 For <external_ip>, specify the value of the external IP address of the Ingress Operator load balancer that you obtained.
    Example output
    Z3AADJGX6KTTL2

    The output of this command is the load balancer hosted zone ID.

  4. Obtain the public hosted zone ID for your cluster’s domain:

    $ aws route53 list-hosted-zones-by-name \
                --dns-name "<domain_name>" \ (1)
                --query 'HostedZones[? Config.PrivateZone != `true` && Name == `<domain_name>.`].Id' (1)
                --output text
    1 For <domain_name>, specify the Route 53 base domain for your OpenShift Container Platform cluster.
    Example output
    /hostedzone/Z3URY6TWQ91KVV

    The public hosted zone ID for your domain is shown in the command output. In this example, it is Z3URY6TWQ91KVV.

  5. Add the alias records to your private zone:

    $ aws route53 change-resource-record-sets --hosted-zone-id "<private_hosted_zone_id>" --change-batch '{ (1)
    >   "Changes": [
    >     {
    >       "Action": "CREATE",
    >       "ResourceRecordSet": {
    >         "Name": "\\052.apps.<cluster_domain>", (2)
    >         "Type": "A",
    >         "AliasTarget":{
    >           "HostedZoneId": "<hosted_zone_id>", (3)
    >           "DNSName": "<external_ip>.", (4)
    >           "EvaluateTargetHealth": false
    >         }
    >       }
    >     }
    >   ]
    > }'
    1 For <private_hosted_zone_id>, specify the value from the output of the CloudFormation template for DNS and load balancing.
    2 For <cluster_domain>, specify the domain or subdomain that you use with your OpenShift Container Platform cluster.
    3 For <hosted_zone_id>, specify the public hosted zone ID for the load balancer that you obtained.
    4 For <external_ip>, specify the value of the external IP address of the Ingress Operator load balancer. Ensure that you include the trailing period (.) in this parameter value.
  6. Add the records to your public zone:

    $ aws route53 change-resource-record-sets --hosted-zone-id "<public_hosted_zone_id>"" --change-batch '{ (1)
    >   "Changes": [
    >     {
    >       "Action": "CREATE",
    >       "ResourceRecordSet": {
    >         "Name": "\\052.apps.<cluster_domain>", (2)
    >         "Type": "A",
    >         "AliasTarget":{
    >           "HostedZoneId": "<hosted_zone_id>", (3)
    >           "DNSName": "<external_ip>.", (4)
    >           "EvaluateTargetHealth": false
    >         }
    >       }
    >     }
    >   ]
    > }'
    1 For <public_hosted_zone_id>, specify the public hosted zone for your domain.
    2 For <cluster_domain>, specify the domain or subdomain that you use with your OpenShift Container Platform cluster.
    3 For <hosted_zone_id>, specify the public hosted zone ID for the load balancer that you obtained.
    4 For <external_ip>, specify the value of the external IP address of the Ingress Operator load balancer. Ensure that you include the trailing period (.) in this parameter value.

Completing an AWS installation on user-provisioned infrastructure

After you start the OpenShift Container Platform installation on Amazon Web Service (AWS) user-provisioned infrastructure, monitor the deployment to completion.

Prerequisites
  • Removed the bootstrap node for an OpenShift Container Platform cluster on user-provisioned AWS infrastructure.

  • Install the oc CLI and log in.

Procedure
  1. Complete the cluster installation:

    $ ./openshift-install --dir=<installation_directory> wait-for install-complete (1)
    1 For <installation_directory>, specify the path to the directory that you stored the installation files in.
    Example output
    INFO Waiting up to 30m0s for the cluster to initialize...

    The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

  2. Register your cluster on the Cluster registration page.

Next steps