OpenShift docs are moving and will soon only be available at docs.redhat.com, the home of all Red Hat product documentation. Explore the new docs experience today.
  1. Documentation
    2. history bug_report picture_as_pdf
×

Updating a cluster using the CLI

Prerequisites

  • Have access to the cluster as a user with admin privileges. See Using RBAC to define and apply permissions.

  • Have a recent etcd backup in case your update fails and you must restore your cluster to a previous state.

  • Have a recent Container Storage Interface (CSI) volume snapshot in case you need to restore persistent volumes due to a pod failure.

  • Your RHEL7 workers are replaced with RHEL8 or RHCOS workers. Red Hat does not support in-place RHEL7 to RHEL8 updates for RHEL workers; those hosts must be replaced with a clean operating system install.

  • You have updated all Operators previously installed through Operator Lifecycle Manager (OLM) to a version that is compatible with your target release. Updating the Operators ensures they have a valid update path when the default OperatorHub catalogs switch from the current minor version to the next during a cluster update. See Updating installed Operators for more information on how to check compatibility and, if necessary, update the installed Operators.

  • Ensure that all machine config pools (MCPs) are running and not paused. Nodes associated with a paused MCP are skipped during the update process. You can pause the MCPs if you are performing a canary rollout update strategy.

  • If your cluster uses manually maintained credentials, update the cloud provider resources for the new release. For more information, including how to determine if this is a requirement for your cluster, see Preparing to update a cluster with manually maintained credentials.

  • Ensure that you address all Upgradeable=False conditions so the cluster allows an update to the next minor version. An alert displays at the top of the Cluster Settings page when you have one or more cluster Operators that cannot be updated. You can still update to the next available patch update for the minor release you are currently on.

  • If you run an Operator or you have configured any application with the pod disruption budget, you might experience an interruption during the update process. If minAvailable is set to 1 in PodDisruptionBudget, the nodes are drained to apply pending machine configs which might block the eviction process. If several nodes are rebooted, all the pods might run on only one node, and the PodDisruptionBudget field can prevent the node drain.

  • When an update is failing to complete, the Cluster Version Operator (CVO) reports the status of any blocking components while attempting to reconcile the update. Rolling your cluster back to a previous version is not supported. If your update is failing to complete, contact Red Hat support.

  • Using the unsupportedConfigOverrides section to modify the configuration of an Operator is unsupported and might block cluster updates. You must remove this setting before you can update your cluster.
Additional resources

Pausing a MachineHealthCheck resource

During the update process, nodes in the cluster might become temporarily unavailable. In the case of worker nodes, the machine health check might identify such nodes as unhealthy and reboot them. To avoid rebooting such nodes, pause all the MachineHealthCheck resources before updating the cluster.

Prerequisites

  • Install the OpenShift CLI (oc).

Procedure

  1. To list all the available MachineHealthCheck resources that you want to pause, run the following command:

    $ oc get machinehealthcheck -n openshift-machine-api

  2. To pause the machine health checks, add the cluster.x-k8s.io/paused="" annotation to the MachineHealthCheck resource. Run the following command:

    $ oc -n openshift-machine-api annotate mhc <mhc-name> cluster.x-k8s.io/paused=""

    The annotated MachineHealthCheck resource resembles the following YAML file:

    apiVersion: machine.openshift.io/v1beta1
kind: MachineHealthCheck
metadata:
  name: example
  namespace: openshift-machine-api
  annotations:
    cluster.x-k8s.io/paused: ""
spec:
  selector:
    matchLabels:
      role: worker
  unhealthyConditions:
  - type:    "Ready"
    status:  "Unknown"
    timeout: "300s"
  - type:    "Ready"
    status:  "False"
    timeout: "300s"
  maxUnhealthy: "40%"
status:
  currentHealthy: 5
  expectedMachines: 5

    Resume the machine health checks after updating the cluster. To resume the check, remove the pause annotation from the MachineHealthCheck resource by running the following command:

    $ oc -n openshift-machine-api annotate mhc <mhc-name> cluster.x-k8s.io/paused-

About updating single node OpenShift Container Platform

You can update, or upgrade, a single-node OpenShift Container Platform cluster by using either the console or CLI.

However, note the following limitations:

  • The prerequisite to pause the MachineHealthCheck resources is not required because there is no other node to perform the health check.

  • Restoring a single-node OpenShift Container Platform cluster using an etcd backup is not officially supported. However, it is good practice to perform the etcd backup in case your update fails. If your control plane is healthy, you might be able to restore your cluster to a previous state by using the backup.

  • Updating a single-node OpenShift Container Platform cluster requires downtime and can include an automatic reboot. The amount of downtime depends on the update payload, as described in the following scenarios:

    • If the update payload contains an operating system update, which requires a reboot, the downtime is significant and impacts cluster management and user workloads.

    • If the update contains machine configuration changes that do not require a reboot, the downtime is less, and the impact on the cluster management and user workloads is lessened. In this case, the node draining step is skipped with single-node OpenShift Container Platform because there is no other node in the cluster to reschedule the workloads to.

    • If the update payload does not contain an operating system update or machine configuration changes, a short API outage occurs and resolves quickly.

There are conditions, such as bugs in an updated package, that can cause the single node to not restart after a reboot. In this case, the update does not rollback automatically.
Additional resources

Updating a cluster by using the CLI

You can use the OpenShift CLI (oc) to review and request cluster updates.

You can find information about available OpenShift Container Platform advisories and updates in the errata section of the Customer Portal.

Prerequisites

  • Install the OpenShift CLI (oc) that matches the version for your updated version.

  • Log in to the cluster as user with cluster-admin privileges.

  • Pause all MachineHealthCheck resources.

Procedure

  1. View the available updates and note the version number of the update that you want to apply:

    $ oc adm upgrade
    Example output
    Cluster version is 4.13.10
Upstream is unset, so the cluster will use an appropriate default.
Channel: stable-4.13 (available channels: candidate-4.13, candidate-4.14, fast-4.13, stable-4.13)
Recommended updates:
  VERSION     IMAGE
  4.13.14     quay.io/openshift-release-dev/ocp-release@sha256:406fcc160c097f61080412afcfa7fd65284ac8741ac7ad5b480e304aba73674b
  4.13.13     quay.io/openshift-release-dev/ocp-release@sha256:d62495768e335c79a215ba56771ff5ae97e3cbb2bf49ed8fb3f6cefabcdc0f17
  4.13.12     quay.io/openshift-release-dev/ocp-release@sha256:73946971c03b43a0dc6f7b0946b26a177c2f3c9d37105441315b4e3359373a55
  4.13.11     quay.io/openshift-release-dev/ocp-release@sha256:e1c2377fdae1d063aaddc753b99acf25972b6997ab9a0b7e80cfef627b9ef3dd

    • If there are no available updates, updates that are supported but not recommended might still be available. See Updating along a conditional update path for more information.

    • For details and information on how to perform a Control Plane Only update, please refer to the Preparing to perform a Control Plane Only update page, listed in the Additional resources section.

  2. Based on your organization requirements, set the appropriate update channel. For example, you can set your channel to stable-4.13 or fast-4.13. For more information about channels, refer to Understanding update channels and releases listed in the Additional resources section.

    $ oc adm upgrade channel <channel>

    For example, to set the channel to stable-4.15:

    $ oc adm upgrade channel stable-4.15

    For production clusters, you must subscribe to a stable-*, eus-*, or fast-* channel.

    When you are ready to move to the next minor version, choose the channel that corresponds to that minor version. The sooner the update channel is declared, the more effectively the cluster can recommend update paths to your target version. The cluster might take some time to evaluate all the possible updates that are available and offer the best update recommendations to choose from. Update recommendations can change over time, as they are based on what update options are available at the time.

    If you cannot see an update path to your target minor version, keep updating your cluster to the latest patch release for your current version until the next minor version is available in the path.

  3. Apply an update:

    • To update to the latest version:

      $ oc adm upgrade --to-latest=true (1)

    • To update to a specific version:

      $ oc adm upgrade --to=<version> (1)
      1 <version> is the update version that you obtained from the output of the oc adm upgrade command.

      When using oc adm upgrade --help, there is a listed option for --force. This is heavily discouraged, as using the --force option bypasses cluster-side guards, including release verification and precondition checks. Using --force does not guarantee a successful update. Bypassing guards put the cluster at risk.

  4. Review the status of the Cluster Version Operator:

    $ oc adm upgrade

  5. After the update completes, you can confirm that the cluster version has updated to the new version:

    $ oc adm upgrade
    Example output
    Cluster version is <version>

Upstream is unset, so the cluster will use an appropriate default.
Channel: stable-<version> (available channels: candidate-<version>, eus-<version>, fast-<version>, stable-<version>)

No updates available. You may force an update to a specific release image, but doing so might not be supported and might result in downtime or data loss.

  6. If you are updating your cluster to the next minor version, such as version X.y to X.(y+1), it is recommended to confirm that your nodes are updated before deploying workloads that rely on a new feature:

    $ oc get nodes
    Example output
    NAME                           STATUS   ROLES    AGE   VERSION
ip-10-0-168-251.ec2.internal   Ready    master   82m   v1.28.5
ip-10-0-170-223.ec2.internal   Ready    master   82m   v1.28.5
ip-10-0-179-95.ec2.internal    Ready    worker   70m   v1.28.5
ip-10-0-182-134.ec2.internal   Ready    worker   70m   v1.28.5
ip-10-0-211-16.ec2.internal    Ready    master   82m   v1.28.5
ip-10-0-250-100.ec2.internal   Ready    worker   69m   v1.28.5
Additional resources

Updating along a conditional update path

You can update along a recommended conditional update path using the web console or the OpenShift CLI (oc). When a conditional update is not recommended for your cluster, you can update along a conditional update path using the OpenShift CLI (oc) 4.10 or later.

Procedure

  1. To view the description of the update when it is not recommended because a risk might apply, run the following command:

    $ oc adm upgrade --include-not-recommended

  2. If the cluster administrator evaluates the potential known risks and decides it is acceptable for the current cluster, then the administrator can waive the safety guards and proceed the update by running the following command:

    $ oc adm upgrade --allow-not-recommended --to <version> (1)
    1 <version> is the supported but not recommended update version that you obtained from the output of the previous command.
Additional resources

Changing the update server by using the CLI

Changing the update server is optional. If you have an OpenShift Update Service (OSUS) installed and configured locally, you must set the URL for the server as the upstream to use the local server during updates. The default value for upstream is https://api.openshift.com/api/upgrades_info/v1/graph.

Procedure

  • Change the upstream parameter value in the cluster version:

    $ oc patch clusterversion/version --patch '{"spec":{"upstream":"<update-server-url>"}}' --type=merge

    The <update-server-url> variable specifies the URL for the update server.

    Example output
    clusterversion.config.openshift.io/version patched