Soon, all Red Hat OpenShift documentation will only be available on docs.redhat.com, the official location of all Red Hat product documentation. Get familiar with the updated experience today!
  1. Documentation
    2. history bug_report picture_as_pdf
×

Troubleshooting operating system issues

OpenShift Container Platform runs on RHCOS. You can follow these procedures to troubleshoot problems related to the operating system.

Investigating kernel crashes

The kdump service, included in the kexec-tools package, provides a crash-dumping mechanism. You can use this service to save the contents of a system’s memory for later analysis.

The x86_64 architecture supports kdump in General Availability (GA) status, whereas other architectures support kdump in Technology Preview (TP) status.

The following table provides details about the support level of kdump for different architectures.

Table 1. Kdump support in RHCOS
Architecture Support level

x86_64

GA

aarch64

TP

s390x

TP

ppc64le

TP

Kdump support, for the preceding three architectures in the table, is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Enabling kdump

RHCOS ships with the kexec-tools package, but manual configuration is required to enable the kdump service.

Procedure

Perform the following steps to enable kdump on RHCOS.

  1. To reserve memory for the crash kernel during the first kernel booting, provide kernel arguments by entering the following command:

    # rpm-ostree kargs --append='crashkernel=256M'

    For the ppc64le platform, the recommended value for crashkernel is crashkernel=2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G.

  2. Optional: To write the crash dump over the network or to some other location, rather than to the default local /var/crash location, edit the /etc/kdump.conf configuration file.

    If your node uses LUKS-encrypted devices, you must use network dumps as kdump does not support saving crash dumps to LUKS-encrypted devices.

    For details on configuring the kdump service, see the comments in /etc/sysconfig/kdump, /etc/kdump.conf, and the kdump.conf manual page. Also refer to the RHEL kdump documentation for further information on configuring the dump target.

    If you have multipathing enabled on your primary disk, the dump target must be either an NFS or SSH server and you must exclude the multipath module from your /etc/kdump.conf configuration file.

  3. Enable the kdump systemd service.

    # systemctl enable kdump.service

  4. Reboot your system.

    # systemctl reboot

  5. Ensure that kdump has loaded a crash kernel by checking that the kdump.service systemd service has started and exited successfully and that the command, cat /sys/kernel/kexec_crash_loaded, prints the value 1.

Enabling kdump on day-1

The kdump service is intended to be enabled per node to debug kernel problems. Because there are costs to having kdump enabled, and these costs accumulate with each additional kdump-enabled node, it is recommended that the kdump service only be enabled on each node as needed. Potential costs of enabling the kdump service on each node include:

  • Less available RAM due to memory being reserved for the crash kernel.

  • Node unavailability while the kernel is dumping the core.

  • Additional storage space being used to store the crash dumps.

If you are aware of the downsides and trade-offs of having the kdump service enabled, it is possible to enable kdump in a cluster-wide fashion. Although machine-specific machine configs are not yet supported, you can use a systemd unit in a MachineConfig object as a day-1 customization and have kdump enabled on all nodes in the cluster. You can create a MachineConfig object and inject that object into the set of manifest files used by Ignition during cluster setup.

See "Customizing nodes" in the Installing → Installation configuration section for more information and examples on how to use Ignition configs.
Procedure

Create a MachineConfig object for cluster-wide configuration:

  1. Create a Butane config file, 99-worker-kdump.bu, that configures and enables kdump:

    variant: openshift
version: 4.15.0
metadata:
  name: 99-worker-kdump (1)
  labels:
    machineconfiguration.openshift.io/role: worker (1)
openshift:
  kernel_arguments: (2)
    - crashkernel=256M
storage:
  files:
    - path: /etc/kdump.conf (3)
      mode: 0644
      overwrite: true
      contents:
        inline: |
          path /var/crash
          core_collector makedumpfile -l --message-level 7 -d 31

    - path: /etc/sysconfig/kdump (4)
      mode: 0644
      overwrite: true
      contents:
        inline: |
          KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
          KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 rootflags=nofail acpi_no_memhotplug transparent_hugepage=never nokaslr novmcoredd hest_disable" (5)
          KEXEC_ARGS="-s"
          KDUMP_IMG="vmlinuz"

systemd:
  units:
    - name: kdump.service
      enabled: true
    1 Replace worker with master in both locations when creating a MachineConfig object for control plane nodes.
    2 Provide kernel arguments to reserve memory for the crash kernel. You can add other kernel arguments if necessary. For the ppc64le platform, the recommended value for crashkernel is crashkernel=2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G.
    3 If you want to change the contents of /etc/kdump.conf from the default, include this section and modify the inline subsection accordingly.
    4 If you want to change the contents of /etc/sysconfig/kdump from the default, include this section and modify the inline subsection accordingly.
    5 For the ppc64le platform, replace nr_cpus=1 with maxcpus=1, which is not supported on this platform.

To export the dumps to NFS targets, the nfs kernel module must be explicitly added to the configuration file:

Example /etc/kdump.conf file
nfs server.example.com:/export/cores
core_collector makedumpfile -l --message-level 7 -d 31
extra_modules nfs

  1. Use Butane to generate a machine config YAML file, 99-worker-kdump.yaml, containing the configuration to be delivered to the nodes:

    $ butane 99-worker-kdump.bu -o 99-worker-kdump.yaml

  2. Put the YAML file into the <installation_directory>/manifests/ directory during cluster setup. You can also create this MachineConfig object after cluster setup with the YAML file:

    $ oc create -f 99-worker-kdump.yaml

Testing the kdump configuration

See the Testing the kdump configuration section in the RHEL documentation for kdump.

Analyzing a core dump

See the Analyzing a core dump section in the RHEL documentation for kdump.

It is recommended to perform vmcore analysis on a separate RHEL system.

Additional resources

Debugging Ignition failures

If a machine cannot be provisioned, Ignition fails and RHCOS will boot into the emergency shell. Use the following procedure to get debugging information.

Procedure

  1. Run the following command to show which service units failed:

    $ systemctl --failed

  2. Optional: Run the following command on an individual service unit to find out more information:

    $ journalctl -u <unit>.service