OpenShift docs are moving and will soon only be available at docs.redhat.com, the home of all Red Hat product documentation. Explore the new docs experience today.
  1. Documentation
    2. history bug_report picture_as_pdf
×

Switching Bluefield-2 from DPU to NIC

You can switch the Bluefield-2 network device from data processing unit (DPU) mode to network interface controller (NIC) mode.

Switching Bluefield-2 from DPU mode to NIC mode

Use the following procedure to switch Bluefield-2 from data processing units (DPU) mode to network interface controller (NIC) mode.

Currently, only switching Bluefield-2 from DPU to NIC mode is supported. Switching from NIC mode to DPU mode is unsupported.
Prerequisites

  • You have installed the SR-IOV Network Operator. For more information, see "Installing SR-IOV Network Operator".

  • You have updated Bluefield-2 to the latest firmware. For more information, see Firmware for NVIDIA BlueField-2.

Procedure

  1. Add the following labels to each of your worker nodes by entering the following commands:

    $ oc label node <example_node_name_one> node-role.kubernetes.io/sriov=
    $ oc label node <example_node_name_two> node-role.kubernetes.io/sriov=

  2. Create a machine config pool for the SR-IOV Network Operator, for example:

    apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfigPool
metadata:
  name: sriov
spec:
  machineConfigSelector:
    matchExpressions:
    - {key: machineconfiguration.openshift.io/role, operator: In, values: [worker,sriov]}
  nodeSelector:
    matchLabels:
      node-role.kubernetes.io/sriov: ""

  3. Apply the following machineconfig.yaml file to the worker nodes:

    apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
  labels:
    machineconfiguration.openshift.io/role: sriov
  name: 99-bf2-dpu
spec:
  config:
    ignition:
      version: 3.2.0
    storage:
      files:
      - contents:
          source: data:text/plain;charset=utf-8;base64,ZmluZF9jb250YWluZXIoKSB7CiAgY3JpY3RsIHBzIC1vIGpzb24gfCBqcSAtciAnLmNvbnRhaW5lcnNbXSB8IHNlbGVjdCgubWV0YWRhdGEubmFtZT09InNyaW92LW5ldHdvcmstY29uZmlnLWRhZW1vbiIpIHwgLmlkJwp9CnVudGlsIG91dHB1dD0kKGZpbmRfY29udGFpbmVyKTsgW1sgLW4gIiRvdXRwdXQiIF1dOyBkbwogIGVjaG8gIndhaXRpbmcgZm9yIGNvbnRhaW5lciB0byBjb21lIHVwIgogIHNsZWVwIDE7CmRvbmUKISBzdWRvIGNyaWN0bCBleGVjICRvdXRwdXQgL2JpbmRhdGEvc2NyaXB0cy9iZjItc3dpdGNoLW1vZGUuc2ggIiRAIgo=
        mode: 0755
        overwrite: true
        path: /etc/default/switch_in_sriov_config_daemon.sh
    systemd:
      units:
      - name: dpu-switch.service
        enabled: true
        contents: |
          [Unit]
          Description=Switch BlueField2 card to NIC/DPU mode
          RequiresMountsFor=%t/containers
          Wants=network.target
          After=network-online.target kubelet.service
          [Service]
          SuccessExitStatus=0 120
          RemainAfterExit=True
          ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic || shutdown -r now' (1)
          Type=oneshot
          [Install]
          WantedBy=multi-user.target
    1 Optional: The PCI address of a specific card can optionally be specified, for example ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic 0000:5e:00.0 || echo done'. By default, the first device is selected. If there is more than one device, you must specify which PCI address to be used. The PCI address must be the same on all nodes that are switching Bluefield-2 from DPU mode to NIC mode.

  4. Wait for the worker nodes to restart. After restarting, the Bluefield-2 network device on the worker nodes is switched into NIC mode.

  5. Optional: You might need to restart the host hardware because most recent Bluefield-2 firmware releases require a hardware restart to switch into NIC mode.

Additional resources

Installing SR-IOV Network Operator