OpenShift docs are moving and will soon only be available at docs.redhat.com, the home of all Red Hat product documentation. Explore the new docs experience today.
  1. Documentation
    2. history bug_report picture_as_pdf
×

Updating OpenShift Virtualization

OpenShift Virtualization on RHEL 9

OpenShift Virtualization 4.14 is based on Red Hat Enterprise Linux (RHEL) 9. You can update to OpenShift Virtualization 4.14 from a version that was based on RHEL 8 by following the standard OpenShift Virtualization update procedure. No additional steps are required.

As in previous versions, you can perform the update without disrupting running workloads. OpenShift Virtualization 4.14 supports live migration from RHEL 8 nodes to RHEL 9 nodes.

RHEL 9 machine type

All VM templates that are included with OpenShift Virtualization now use the RHEL 9 machine type by default: machineType: pc-q35-rhel9.<y>.0, where <y> is a single digit corresponding to the latest minor version of RHEL 9. For example, the value pc-q35-rhel9.2.0 is used for RHEL 9.2.

Updating OpenShift Virtualization does not change the machineType value of any existing VMs. These VMs continue to function as they did before the update. You can optionally change a VM’s machine type so that it can benefit from RHEL 9 improvements.

Before you change a VM’s machineType value, you must shut down the VM.

About updating OpenShift Virtualization

  • Operator Lifecycle Manager (OLM) manages the lifecycle of the OpenShift Virtualization Operator. The Marketplace Operator, which is deployed during OpenShift Container Platform installation, makes external Operators available to your cluster.

  • OLM provides z-stream and minor version updates for OpenShift Virtualization. Minor version updates become available when you update OpenShift Container Platform to the next minor version. You cannot update OpenShift Virtualization to the next minor version without first updating OpenShift Container Platform.

  • OpenShift Virtualization subscriptions use a single update channel that is named stable. The stable channel ensures that your OpenShift Virtualization and OpenShift Container Platform versions are compatible.

  • If your subscription’s approval strategy is set to Automatic, the update process starts as soon as a new version of the Operator is available in the stable channel. It is highly recommended to use the Automatic approval strategy to maintain a supportable environment. Each minor version of OpenShift Virtualization is only supported if you run the corresponding OpenShift Container Platform version. For example, you must run OpenShift Virtualization 4.14 on OpenShift Container Platform 4.14.

    • Though it is possible to select the Manual approval strategy, this is not recommended because it risks the supportability and functionality of your cluster. With the Manual approval strategy, you must manually approve every pending update. If OpenShift Container Platform and OpenShift Virtualization updates are out of sync, your cluster becomes unsupported.

  • The amount of time an update takes to complete depends on your network connection. Most automatic updates complete within fifteen minutes.

  • Updating OpenShift Virtualization does not interrupt network connections.

  • Data volumes and their associated persistent volume claims are preserved during update.

If you have virtual machines running that use hostpath provisioner storage, they cannot be live migrated and might block an OpenShift Container Platform cluster update.

As a workaround, you can reconfigure the virtual machines so that they can be powered off automatically during a cluster update. Remove the evictionStrategy: LiveMigrate field and set the runStrategy field to Always.

About workload updates

When you update OpenShift Virtualization, virtual machine workloads, including libvirt, virt-launcher, and qemu, update automatically if they support live migration.

Each virtual machine has a virt-launcher pod that runs the virtual machine instance (VMI). The virt-launcher pod runs an instance of libvirt, which is used to manage the virtual machine (VM) process.

You can configure how workloads are updated by editing the spec.workloadUpdateStrategy stanza of the HyperConverged custom resource (CR). There are two available workload update methods: LiveMigrate and Evict.

Because the Evict method shuts down VMI pods, only the LiveMigrate update strategy is enabled by default.

When LiveMigrate is the only update strategy enabled:

  • VMIs that support live migration are migrated during the update process. The VM guest moves into a new pod with the updated components enabled.

  • VMIs that do not support live migration are not disrupted or updated.

    • If a VMI has the LiveMigrate eviction strategy but does not support live migration, it is not updated.

If you enable both LiveMigrate and Evict:

  • VMIs that support live migration use the LiveMigrate update strategy.

  • VMIs that do not support live migration use the Evict update strategy. If a VMI is controlled by a VirtualMachine object that has runStrategy: Always set, a new VMI is created in a new pod with updated components.

Migration attempts and timeouts

When updating workloads, live migration fails if a pod is in the Pending state for the following periods:

5 minutes

If the pod is pending because it is Unschedulable.

15 minutes

If the pod is stuck in the pending state for any reason.

When a VMI fails to migrate, the virt-controller tries to migrate it again. It repeats this process until all migratable VMIs are running on new virt-launcher pods. If a VMI is improperly configured, however, these attempts can repeat indefinitely.

Each attempt corresponds to a migration object. Only the five most recent attempts are held in a buffer. This prevents migration objects from accumulating on the system while retaining information for debugging.

About Control Plane Only updates

Every even-numbered minor version of OpenShift Container Platform, including 4.10 and 4.12, is an Extended Update Support (EUS) version. However, because Kubernetes design mandates serial minor version updates, you cannot directly update from one EUS version to the next.

After you update from the source EUS version to the next odd-numbered minor version, you must sequentially update OpenShift Virtualization to all z-stream releases of that minor version that are on your update path. When you have upgraded to the latest applicable z-stream version, you can then update OpenShift Container Platform to the target EUS minor version.

When the OpenShift Container Platform update succeeds, the corresponding update for OpenShift Virtualization becomes available. You can now update OpenShift Virtualization to the target EUS version.

Preparing to update

Before beginning a Control Plane Only update, you must:

  • Pause worker nodes' machine config pools before you start a Control Plane Only update so that the workers are not rebooted twice.

  • Disable automatic workload updates before you begin the update process. This is to prevent OpenShift Virtualization from migrating or evicting your virtual machines (VMs) until you update to your target EUS version.

By default, OpenShift Virtualization automatically updates workloads, such as the virt-launcher pod, when you update the OpenShift Virtualization Operator. You can configure this behavior in the spec.workloadUpdateStrategy stanza of the HyperConverged custom resource.

Learn more about Performing a Control Plane Only update.

Preventing workload updates during a Control Plane Only update

When you update from one Extended Update Support (EUS) version to the next, you must manually disable automatic workload updates to prevent OpenShift Virtualization from migrating or evicting workloads during the update process.

Prerequisites

  • You are running an EUS version of OpenShift Container Platform and want to update to the next EUS version. You have not yet updated to the odd-numbered version in between.

  • You read "Preparing to perform a Control Plane Only update" and learned the caveats and requirements that pertain to your OpenShift Container Platform cluster.

  • You paused the worker nodes' machine config pools as directed by the OpenShift Container Platform documentation.

  • It is recommended that you use the default Automatic approval strategy. If you use the Manual approval strategy, you must approve all pending updates in the web console. For more details, refer to the "Manually approving a pending Operator update" section.

Procedure

  1. Run the following command and record the workloadUpdateMethods configuration:

    $ oc get kv kubevirt-kubevirt-hyperconverged \
  -n openshift-cnv -o jsonpath='{.spec.workloadUpdateStrategy.workloadUpdateMethods}'

  2. Turn off all workload update methods by running the following command:

    $ oc patch hyperconverged kubevirt-hyperconverged -n openshift-cnv \
  --type json -p '[{"op":"replace","path":"/spec/workloadUpdateStrategy/workloadUpdateMethods", "value":[]}]'
    Example output
    hyperconverged.hco.kubevirt.io/kubevirt-hyperconverged patched

  3. Ensure that the HyperConverged Operator is Upgradeable before you continue. Enter the following command and monitor the output:

    $ oc get hyperconverged kubevirt-hyperconverged -n openshift-cnv -o json | jq ".status.conditions"
    Example output 
    [
  {
    "lastTransitionTime": "2022-12-09T16:29:11Z",
    "message": "Reconcile completed successfully",
    "observedGeneration": 3,
    "reason": "ReconcileCompleted",
    "status": "True",
    "type": "ReconcileComplete"
  },
  {
    "lastTransitionTime": "2022-12-09T20:30:10Z",
    "message": "Reconcile completed successfully",
    "observedGeneration": 3,
    "reason": "ReconcileCompleted",
    "status": "True",
    "type": "Available"
  },
  {
    "lastTransitionTime": "2022-12-09T20:30:10Z",
    "message": "Reconcile completed successfully",
    "observedGeneration": 3,
    "reason": "ReconcileCompleted",
    "status": "False",
    "type": "Progressing"
  },
  {
    "lastTransitionTime": "2022-12-09T16:39:11Z",
    "message": "Reconcile completed successfully",
    "observedGeneration": 3,
    "reason": "ReconcileCompleted",
    "status": "False",
    "type": "Degraded"
  },
  {
    "lastTransitionTime": "2022-12-09T20:30:10Z",
    "message": "Reconcile completed successfully",
    "observedGeneration": 3,
    "reason": "ReconcileCompleted",
    "status": "True",
    "type": "Upgradeable" (1)
  }
]
    1 The OpenShift Virtualization Operator has the Upgradeable status.

  4. Manually update your cluster from the source EUS version to the next minor version of OpenShift Container Platform:

    $ oc adm upgrade
    Verification

    • Check the current version by running the following command:

      $ oc get clusterversion

      Updating OpenShift Container Platform to the next version is a prerequisite for updating OpenShift Virtualization. For more details, refer to the "Updating clusters" section of the OpenShift Container Platform documentation.

  5. Update OpenShift Virtualization.

    • With the default Automatic approval strategy, OpenShift Virtualization automatically updates to the corresponding version after you update OpenShift Container Platform.

    • If you use the Manual approval strategy, approve the pending updates by using the web console.

  6. Monitor the OpenShift Virtualization update by running the following command:

    $ oc get csv -n openshift-cnv

  7. Update OpenShift Virtualization to every z-stream version that is available for the non-EUS minor version, monitoring each update by running the command shown in the previous step.

  8. Confirm that OpenShift Virtualization successfully updated to the latest z-stream release of the non-EUS version by running the following command:

    $ oc get hyperconverged kubevirt-hyperconverged -n openshift-cnv -o json | jq ".status.versions"
    Example output
    [
  {
    "name": "operator",
    "version": "4.14.10"
  }
]

  9. Wait until the HyperConverged Operator has the Upgradeable status before you perform the next update. Enter the following command and monitor the output:

    $ oc get hyperconverged kubevirt-hyperconverged -n openshift-cnv -o json | jq ".status.conditions"

  10. Update OpenShift Container Platform to the target EUS version.

  11. Confirm that the update succeeded by checking the cluster version:

    $ oc get clusterversion

  12. Update OpenShift Virtualization to the target EUS version.

    • With the default Automatic approval strategy, OpenShift Virtualization automatically updates to the corresponding version after you update OpenShift Container Platform.

    • If you use the Manual approval strategy, approve the pending updates by using the web console.

  13. Monitor the OpenShift Virtualization update by running the following command:

    $ oc get csv -n openshift-cnv

    The update completes when the VERSION field matches the target EUS version and the PHASE field reads Succeeded.

  14. Restore the workloadUpdateMethods configuration that you recorded from step 1 with the following command:

    $ oc patch hyperconverged kubevirt-hyperconverged -n openshift-cnv --type json -p \
  "[{\"op\":\"add\",\"path\":\"/spec/workloadUpdateStrategy/workloadUpdateMethods\", \"value\":{WorkloadUpdateMethodConfig}}]"
    Example output
    hyperconverged.hco.kubevirt.io/kubevirt-hyperconverged patched
    Verification

    • Check the status of VM migration by running the following command:

      $ oc get vmim -A
Next steps

  • You can now unpause the worker nodes' machine config pools.

Configuring workload update methods

You can configure workload update methods by editing the HyperConverged custom resource (CR).

Prerequisites

  • To use live migration as an update method, you must first enable live migration in the cluster.

    If a VirtualMachineInstance CR contains evictionStrategy: LiveMigrate and the virtual machine instance (VMI) does not support live migration, the VMI will not update.
Procedure

  1. To open the HyperConverged CR in your default editor, run the following command:

    $ oc edit hyperconverged kubevirt-hyperconverged -n openshift-cnv

  2. Edit the workloadUpdateStrategy stanza of the HyperConverged CR. For example:

    apiVersion: hco.kubevirt.io/v1beta1
kind: HyperConverged
metadata:
  name: kubevirt-hyperconverged
spec:
  workloadUpdateStrategy:
    workloadUpdateMethods: (1)
    - LiveMigrate (2)
    - Evict (3)
    batchEvictionSize: 10 (4)
    batchEvictionInterval: "1m0s" (5)
# ...
    1 The methods that can be used to perform automated workload updates. The available values are LiveMigrate and Evict. If you enable both options as shown in this example, updates use LiveMigrate for VMIs that support live migration and Evict for any VMIs that do not support live migration. To disable automatic workload updates, you can either remove the workloadUpdateStrategy stanza or set workloadUpdateMethods: [] to leave the array empty.
    2 The least disruptive update method. VMIs that support live migration are updated by migrating the virtual machine (VM) guest into a new pod with the updated components enabled. If LiveMigrate is the only workload update method listed, VMIs that do not support live migration are not disrupted or updated.
    3 A disruptive method that shuts down VMI pods during upgrade. Evict is the only update method available if live migration is not enabled in the cluster. If a VMI is controlled by a VirtualMachine object that has runStrategy: Always configured, a new VMI is created in a new pod with updated components.
    4 The number of VMIs that can be forced to be updated at a time by using the Evict method. This does not apply to the LiveMigrate method.
    5 The interval to wait before evicting the next batch of workloads. This does not apply to the LiveMigrate method.

    You can configure live migration limits and timeouts by editing the spec.liveMigrationConfig stanza of the HyperConverged CR.

  3. To apply your changes, save and exit the editor.

Approving pending Operator updates

Manually approving a pending Operator update

If an installed Operator has the approval strategy in its subscription set to Manual, when new updates are released in its current update channel, the update must be manually approved before installation can begin.

Prerequisites

  • An Operator previously installed using Operator Lifecycle Manager (OLM).

Procedure

  1. In the Administrator perspective of the OpenShift Container Platform web console, navigate to Operators → Installed Operators.

  2. Operators that have a pending update display a status with Upgrade available. Click the name of the Operator you want to update.

  3. Click the Subscription tab. Any updates requiring approval are displayed next to Upgrade status. For example, it might display 1 requires approval.

  4. Click 1 requires approval, then click Preview Install Plan.

  5. Review the resources that are listed as available for update. When satisfied, click Approve.

  6. Navigate back to the Operators → Installed Operators page to monitor the progress of the update. When complete, the status changes to Succeeded and Up to date.

Monitoring update status

Monitoring OpenShift Virtualization upgrade status

To monitor the status of a OpenShift Virtualization Operator upgrade, watch the cluster service version (CSV) PHASE. You can also monitor the CSV conditions in the web console or by running the command provided here.

The PHASE and conditions values are approximations that are based on available information.
Prerequisites

  • Log in to the cluster as a user with the cluster-admin role.

  • Install the OpenShift CLI (oc).

Procedure

  1. Run the following command:

    $ oc get csv -n openshift-cnv

  2. Review the output, checking the PHASE field. For example:

    Example output
    VERSION  REPLACES                                        PHASE
4.9.0    kubevirt-hyperconverged-operator.v4.8.2         Installing
4.9.0    kubevirt-hyperconverged-operator.v4.9.0         Replacing

  3. Optional: Monitor the aggregated status of all OpenShift Virtualization component conditions by running the following command:

    $ oc get hyperconverged kubevirt-hyperconverged -n openshift-cnv \
  -o=jsonpath='{range .status.conditions[*]}{.type}{"\t"}{.status}{"\t"}{.message}{"\n"}{end}'

    A successful upgrade results in the following output:

    Example output
    ReconcileComplete  True  Reconcile completed successfully
Available          True  Reconcile completed successfully
Progressing        False Reconcile completed successfully
Degraded           False Reconcile completed successfully
Upgradeable        True  Reconcile completed successfully

Viewing outdated OpenShift Virtualization workloads

You can view a list of outdated workloads by using the CLI.

If there are outdated virtualization pods in your cluster, the OutdatedVirtualMachineInstanceWorkloads alert fires.
Procedure

  • To view a list of outdated virtual machine instances (VMIs), run the following command:

    $ oc get vmi -l kubevirt.io/outdatedLauncherImage --all-namespaces

Configure workload updates to ensure that VMIs update automatically.

Additional resources