×

Overview

The oc adm router command is provided with the administrator CLI to simplify the tasks of setting up routers in a new installation. If you followed the quick installation, then a default router was automatically created for you. The oc adm router command creates the service and deployment configuration objects. Use the --service-account option to specify the service account the router will use to contact the master.

The router service account can be created in advance or created by the oc adm router --service-account command.

Every form of communication between OpenShift Container Platform components is secured by TLS and uses various certificates and authentication methods. The --default-certificate .pem format file can be supplied or one is created by the oc adm router command. When routes are created, the user can provide route certificates that the router will use when handling the route.

When deleting a router, ensure the deployment configuration, service, and secret are deleted as well.

Routers are deployed on specific nodes. This makes it easier for the cluster administrator and external network manager to coordinate which IP address will run a router and which traffic the router will handle. The routers are deployed on specific nodes by using node selectors.

Routers use host networking by default, and they directly attach to port 80 and 443 on all interfaces on a host. Restrict routers to hosts where ports 80/443 are available and not being consumed by another service, and set this using node selectors and the scheduler configuration. As an example, you can achieve this by dedicating infrastructure nodes to run services such as routers.

It is recommended to use separate distinct openshift-router service account with your router. This can be provided using the --service-account flag to the oc adm router command.

$ oc adm router --dry-run --service-account=router (1)
1 --service-account is the name of a service account for the openshift-router.

Router pods created using oc adm router have default resource requests that a node must satisfy for the router pod to be deployed. In an effort to increase the reliability of infrastructure components, the default resource requests are used to increase the QoS tier of the router pods above pods without resource requests. The default values represent the observed minimum resources required for a basic router to be deployed and can be edited in the routers deployment configuration and you may want to increase them based on the load of the router.

Creating a Router

The quick installation process automatically creates a default router. If the router does not exist, run the following to create a router:

$ oc adm router <router_name> --replicas=<number> --service-account=router

--replicas is usually 1 unless a high availability configuration is being created.

To find the host IP address of the router:

$ oc get po <router-pod>  --template={{.status.hostIP}}

You can also use router shards to ensure that the router is filtered to specific namespaces or routes, or set any environment variables after router creation. In this case create a router for each shard.

Other Basic Router Commands

Checking the Default Router

The default router service account, named router, is automatically created during quick and advanced installations. To verify that this account already exists:

$ oc adm router --dry-run --service-account=router
Viewing the Default Router

To see what the default router would look like if created:

$ oc adm router --dry-run -o yaml --service-account=router
Deploying the Router to a Labeled Node

To deploy the router to any node(s) that match a specified node label:

$ oc adm router <router_name> --replicas=<number> --selector=<label> \
    --service-account=router

For example, if you want to create a router named router and have it placed on a node labeled with region=infra:

$ oc adm router router --replicas=1 --selector='region=infra' \
  --service-account=router

During advanced installation, the openshift_hosted_router_selector and openshift_registry_selector Ansible settings are set to region=infra by default. The default router and registry will only be automatically deployed if a node exists that matches the region=infra label.

For information on updating labels, see Updating Labels on Nodes.

Multiple instances are created on different hosts according to the scheduler policy.

Using a Different Router Image

To use a different router image and view the router configuration that would be used:

$ oc adm router <router_name> -o <format> --images=<image> \
    --service-account=router

For example:

$ oc adm router region-west -o yaml --images=myrepo/somerouter:mytag \
    --service-account=router

Filtering Routes to Specific Routers

Using the ROUTE_LABELS environment variable, you can filter routes so that they are used only by specific routers.

For example, if you have multiple routers, and 100 routes, you can attach labels to the routes so that a portion of them are handled by one router, whereas the rest are handled by another.

  1. After creating a router, use the ROUTE_LABELS environment variable to tag the router:

    $ oc env dc/<router=name>  ROUTE_LABELS="key=value"
  2. Add the label to the desired routes:

    oc label route <route=name> key=value
  3. To verify that the label has been attached to the route, check the route configuration:

    $ oc describe dc/<route_name>
Setting the Maximum Number of Concurrent Connections

The router can handle a maximum number of 20000 connections by default. You can change that limit depending on your needs. Having too few connections prevents the health check from working, which causes unnecessary restarts. You need to configure the system to support the maximum number of connections. The limits shown in 'sysctl fs.nr_open' and 'sysctl fs.file-max' must be large enough. Otherwise, HAproxy will not start.

When the router is created, the --max-connections= option sets the desired limit:

$ oc adm router --max-connections=10000   ....

Edit the ROUTER_MAX_CONNECTIONS environment variable in the router’s deployment configuration to change the value. The router pods are restarted with the new value. If ROUTER_MAX_CONNECTIONS is not present, the default value of 20000, is used.

HAProxy Strict SNI

The HAProxy strict-sni can be controlled through the ROUTER_STRICT_SNI environment variable in the router’s deployment configuration. It can also be set when the router is created by using the --strict-sni command line option.

$ oc adm router --strict-sni

TLS Cipher Suites

Set the router cipher suite using the --ciphers option when creating a router:

$ oc adm router --ciphers=modern   ....

The values are: modern, intermediate, or old, with intermediate as the default. Alternatively, a set of ":" separated ciphers can be provided. The ciphers must be from the set displayed by:

$ openssl ciphers

Alternatively, use the ROUTER_CIPHERS environment variable for an existing router.

Highly-Available Routers

You can set up a highly-available router on your OpenShift Container Platform cluster using IP failover. This setup has multiple replicas on different nodes so the failover software can switch to another replica if the current one fails.

Customizing the Router Service Ports

You can customize the service ports that a template router binds to by setting the environment variables ROUTER_SERVICE_HTTP_PORT and ROUTER_SERVICE_HTTPS_PORT. This can be done by creating a template router, then editing its deployment configuration.

The following example creates a router deployment with 0 replicas and customizes the router service HTTP and HTTPS ports, then scales it appropriately (to 1 replica).

$ oc adm router --replicas=0 --ports='10080:10080,10443:10443' (1)
$ oc set env dc/router ROUTER_SERVICE_HTTP_PORT=10080  \
                   ROUTER_SERVICE_HTTPS_PORT=10443
$ oc scale dc/router --replicas=1
1 Ensures exposed ports are appropriately set for routers that use the container networking mode --host-network=false.

If you do customize the template router service ports, you will also need to ensure that the nodes where the router pods run have those custom ports opened in the firewall (either via Ansible or iptables, or any other custom method that you use via firewall-cmd).

The following is an example using iptables to open the custom router service ports.

$ iptables -A INPUT -p tcp --dport 10080 -j ACCEPT
$ iptables -A INPUT -p tcp --dport 10443 -j ACCEPT

Working With Multiple Routers

An administrator can create multiple routers with the same definition to serve the same set of routes. Each router will be on a different node and will have a different IP address. The network administrator will need to get the desired traffic to each node.

Multiple routers can be grouped to distribute routing load in the cluster and separate tenants to different routers or shards. Each router or shard in the group admits routes based on the selectors in the router. An administrator can create shards over the whole cluster using ROUTE_LABELS. A user can create shards over a namespace (project) by using NAMESPACE_LABELS.

Adding a Node Selector to a Deployment Configuration

Making specific routers deploy on specific nodes requires two steps:

  1. Add a label to the desired node:

    $ oc label node 10.254.254.28 "router=first"
  2. Add a node selector to the router deployment configuration:

    $ oc edit dc <deploymentConfigName>

    Add the template.spec.nodeSelector field with a key and value corresponding to the label:

    ...
      template:
        metadata:
          creationTimestamp: null
          labels:
            router: router1
        spec:
          nodeSelector:      (1)
            router: "first"
    ...
    1 The key and value are router and first, respectively, corresponding to the router=first label.

Using Router Shards

Router sharding uses NAMESPACE_LABELS and ROUTE_LABELS, to filter router namespaces and routes. This enables you to partition routes amongst multiple router deployments effectively distributing the set of routes.

By default, a router selects all routes from all projects (namespaces). Sharding adds labels to routes and each router shard selects routes with specific labels.

The router service account must have the [cluster reader] permission set to allow access to labels in other namespaces.

Router Sharding and DNS

Because an external DNS server is needed to route requests to the desired shard, the administrator is responsible for making a separate DNS entry for each router in a project. A router will not forward unknown routes to another router.

For example:

  • If Router A lives on host 192.168.0.5 and has routes with *.foo.com.

  • And Router B lives on host 192.168.1.9 and has routes with *.example.com.

Separate DNS entries must resolve *.foo.com to the node hosting Router A and *.example.com to the node hosting Router B:

  • *.foo.com A IN 192.168.0.5

  • *.example.com A IN 192.168.1.9

Router Sharding Examples

This section describes router sharding using project (namespace) labels or project (namespace) names.

Router Sharding Based on Namespace Labels
Figure 1. Router Sharding Based on Namespace Labels

Example: A router deployment finops-router is run with route selector NAMESPACE_LABELS="name in (finance, ops)" and a router deployment dev-router is run with route selector NAMESPACE_LABELS="name=dev".

If all routes are in the three namespaces finance, ops or dev, then this could effectively distribute your routes across two router deployments.

In the above scenario, sharding becomes a special case of partitioning with no overlapping sets. Routes are divided amongst multiple router shards.

The criteria for route selection governs how the routes are distributed. It is possible to have routes that overlap across multiple router deployments.

Example: In addition to the finops-router and dev-router in the example above, you also have devops-router, which is run with a route selector NAMESPACE_LABELS="name in (dev, ops)".

The routes in namespaces dev or ops now are serviced by two different router deployments. This becomes a case in which you have partitioned the routes with an overlapping set.

In addition, this enables you to create more complex routing rules, allowing the diversion of high priority traffic to the dedicated finops-router, but sending the lower priority ones to the devops-router.

NAMESPACE_LABELS allows filtering of the projects to service and selecting all the routes from those projects, but you may want to partition routes based on other criteria in the routes themselves. The ROUTE_LABELS selector allows you to slice-and-dice the routes themselves.

Example: A router deployment prod-router is run with route selector ROUTE_LABELS="mydeployment=prod" and a router deployment devtest-router is run with route selector ROUTE_LABELS="mydeployment in (dev, test)".

The example assumes you have all the routes you want to be serviced tagged with a label "mydeployment=<tag>".

Router Sharding Based on Namespace Names
Figure 2. Router Sharding Based on Namespace Names

Creating Router Shards

To implement router sharding, set labels on the routes in the pool and express the desired subset of those routes for the router to admit with a selection expression via the oc set env command.

First, ensure that service account associated with the router has the cluster reader permission.

The rest of this section describes an extended example. Suppose there are 26 routes, named a — z, in the pool, with various labels:

Possible labels on routes in the pool
sla=high       geo=east     hw=modest     dept=finance
sla=medium     geo=west     hw=strong     dept=dev
sla=low                                   dept=ops

These labels express the concepts: service level agreement, geographical location, hardware requirements, and department. The routes in the pool can have at most one label from each column. Some routes may have other labels, entirely, or none at all.

Name(s) SLA Geo HW Dept Other Labels

a

high

east

modest

finance

type=static

b

west

strong

type=dynamic

c, d, e

low

modest

type=static

g — k

medium

strong

dev

l — s

high

modest

ops

t — z

west

type=dynamic

Here is a convenience script mkshard that ilustrates how oc adm router, oc set env, and oc scale work together to make a router shard.

#!/bin/bash
# Usage: mkshard ID SELECTION-EXPRESSION
id=$1
sel="$2"
router=router-shard-$id           (1)
oc adm router $router --replicas=0  (2)
dc=dc/router-shard-$id            (3)
oc set env   $dc ROUTE_LABELS="$sel"  (4)
oc scale $dc --replicas=3         (5)
1 The created router has name router-shard-<id>.
2 Specify no scaling for now.
3 The deployment configuration for the router.
4 Set the selection expression using oc set env. The selection expression is the value of the ROUTE_LABELS environment variable.
5 Scale it up.

Running mkshard several times creates several routers:

Router Selection Expression Routes

router-shard-1

sla=high

a, l — s

router-shard-2

geo=west

b, t — z

router-shard-3

dept=dev

g — k

Modifying Router Shards

Because a router shard is a construct based on labels, you can modify either the labels (via oc label) or the selection expression.

This section extends the example started in the Creating Router Shards section, demonstrating how to change the selection expression.

Here is a convenience script modshard that modifies an existing router to use a new selection expression:

#!/bin/bash
# Usage: modshard ID SELECTION-EXPRESSION...
id=$1
shift
router=router-shard-$id       (1)
dc=dc/$router                 (2)
oc scale $dc --replicas=0     (3)
oc set env   $dc "$@"             (4)
oc scale $dc --replicas=3     (5)
1 The modified router has name router-shard-<id>.
2 The deployment configuration where the modifications occur.
3 Scale it down.
4 Set the new selection expression using oc set env. Unlike mkshard from the Creating Router Shards section, the selection expression specified as the non-ID arguments to modshard must include the environment variable name as well as its value.
5 Scale it back up.

In modshard, the oc scale commands are not necessary if the deployment strategy for router-shard-<id> is Rolling.

For example, to expand the department for router-shard-3 to include ops as well as dev:

$ modshard 3 ROUTE_LABELS='dept in (dev, ops)'

The result is that router-shard-3 now selects routes g — s (the combined sets of g — k and l — s).

This example takes into account that there are only three departments in this example scenario, and specifies a department to leave out of the shard, thus achieving the same result as the preceding example:

$ modshard 3 ROUTE_LABELS='dept != finanace'

This example specifies shows three comma-separated qualities, and results in only route b being selected:

$ modshard 3 ROUTE_LABELS='hw=strong,type=dynamic,geo=west'

Similarly to ROUTE_LABELS, which involve a route’s labels, you can select routes based on the labels of the route’s namespace labels, with the NAMESPACE_LABELS environment variable. This example modifies router-shard-3 to serve routes whose namespace has the label frequency=weekly:

$ modshard 3 NAMESPACE_LABELS='frequency=weekly'

The last example combines ROUTE_LABELS and NAMESPACE_LABELS to select routes with label sla=low and whose namespace has the label frequency=weekly:

$ modshard 3 \
    NAMESPACE_LABELS='frequency=weekly' \
    ROUTE_LABELS='sla=low'

Using Namespace Router Shards

The routes for a project can be handled by a selected router by using NAMESPACE_LABELS. The router is given a selector for a NAMESPACE_LABELS label and the project that wants to use the router applies the NAMESPACE_LABELS label to its namespace.

First, ensure that service account associated with the router has the cluster reader permission. This permits the router to read the labels that are applied to the namespaces.

Now create and label the router:

$ oc adm router ...  --service-account=router
$ oc set env dc/router NAMESPACE_LABELS="router=r1"

Because the router has a selector for a namespace, the router will handle routes for that namespace. So, for example:

$ oc label namespace default "router=r1"

Now create routes in the default namespace, and the route is available in the default router:

$ oc create -f route1.yaml

Now create a new project (namespace) and create a route, route2.

$ oc new-project p1
$ oc create -f route2.yaml

And notice the route is not available in your router. Now label namespace p1 with "router=r1"

$ oc label namespace p1 "router=r1"

Which makes the route available to the router.

Note that removing the label from the namespace won’t have immediate effect (as we don’t see the updates in the router), so if you redeploy/start a new router pod, you should see the unlabelled effects.

$ oc scale dc/router --replicas=0 && oc scale dc/router --replicas=1

Finding the Host Name of the Router

When exposing a service, a user can use the same route from the DNS name that external users use to access the application. The network administrator of the external network must make sure the host name resolves to the name of a router that has admitted the route. The user can set up their DNS with a CNAME that points to this host name. However, the user may not know the host name of the router. When it is not known, the cluster administrator can provide it.

The cluster administrator can use the --router-canonical-hostname option with the router’s canonical host name when creating the router. For example:

# oc adm router myrouter --router-canonical-hostname="rtr.example.com"

This creates the ROUTER_CANONICAL_HOSTNAME environment variable in the router’s deployment configuration containing the host name of the router.

For routers that already exist, the cluster administrator can edit the router’s deployment configuration and add the ROUTER_CANONICAL_HOSTNAME environment variable:

spec:
  template:
    spec:
      containers:
        - env:
          - name: ROUTER_CANONICAL_HOSTNAME
            value: rtr.example.com

The ROUTER_CANONICAL_HOSTNAME value is displayed in the route status for all routers that have admitted the route. The route status is refreshed every time the router is reloaded.

When a user creates a route, all of the active routers evaluate the route and, if conditions are met, admit it. When a router that defines the ROUTER_CANONICAL_HOSTNAME environment variable admits the route, the router places the value in the routerCanonicalHostname field in the route status. The user can examine the route status to determine which, if any, routers have admitted the route, select a router from the list, and find the host name of the router to pass along to the network administrator.

status:
  ingress:
    conditions:
      lastTransitionTime: 2016-12-07T15:20:57Z
      status: "True"
      type: Admitted
      host: hello.in.mycloud.com
      routerCanonicalHostname: rtr.example.com
      routerName: myrouter
      wildcardPolicy: None

oc describe inclues the host name when available:

$ oc describe route/hello-route3
...
Requested Host: hello.in.mycloud.com exposed on router myroute (host rtr.example.com) 12 minutes ago

Using the above information, the user can ask the DNS administrator to set up a CNAME from the route’s host, hello.in.mycloud.com, to the router’s canonical hostname, rtr.example.com. This results in any traffic to hello.in.mycloud.com reaching the user’s application.

Customizing the Default Routing Subdomain

You can customize the suffix used as the default routing subdomain for your environment by modifying the master configuration file (the /etc/origin/master/master-config.yaml file by default). Routes that do not specify a host name would have one generated using this default routing subdomain.

The following example shows how you can set the configured suffix to v3.openshift.test:

routingConfig:
  subdomain: v3.openshift.test

This change requires a restart of the master if it is running.

With the OpenShift Container Platform master(s) running the above configuration, the generated host name for the example of a route named no-route-hostname without a host name added to a namespace mynamespace would be:

no-route-hostname-mynamespace.v3.openshift.test

Forcing Route Host Names to a Custom Routing Subdomain

If an administrator wants to restrict all routes to a specific routing subdomain, they can pass the --force-subdomain option to the oc adm router command. This forces the router to override any host names specified in a route and generate one based on the template provided to the --force-subdomain option.

The following example runs a router, which overrides the route host names using a custom subdomain template ${name}-${namespace}.apps.example.com.

$ oc adm router --force-subdomain='${name}-${namespace}.apps.example.com'

Using Wildcard Certificates

A TLS-enabled route that does not include a certificate uses the router’s default certificate instead. In most cases, this certificate should be provided by a trusted certificate authority, but for convenience you can use the OpenShift Container Platform CA to create the certificate. For example:

$ CA=/etc/origin/master
$ oc adm ca create-server-cert --signer-cert=$CA/ca.crt \
      --signer-key=$CA/ca.key --signer-serial=$CA/ca.serial.txt \
      --hostnames='*.cloudapps.example.com' \
      --cert=cloudapps.crt --key=cloudapps.key

The oc adm ca create-server-cert command generates a certificate that is valid for two years. This can be altered with the --expire-days option, but for security reasons, it is recommended to not make it greater than this value.

Run oc adm commands only from the first master listed in the Ansible host inventory file, by default /etc/ansible/hosts.

The router expects the certificate and key to be in PEM format in a single file:

$ cat cloudapps.crt cloudapps.key $CA/ca.crt > cloudapps.router.pem

From there you can use the --default-cert flag:

$ oc adm router --default-cert=cloudapps.router.pem --service-account=router

Browsers only consider wildcards valid for subdomains one level deep. So in this example, the certificate would be valid for a.cloudapps.example.com but not for a.b.cloudapps.example.com.

Manually Redeploy Certificates

To manually redeploy the router certificates:

  1. Check to see if a secret containing the default router certificate was added to the router:

    $ oc volumes dc/router
    
    deploymentconfigs/router
      secret/router-certs as server-certificate
        mounted at /etc/pki/tls/private

    If the certificate is added, skip the following step and overwrite the secret.

  2. Make sure that you have a default certificate directory set for the following variable DEFAULT_CERTIFICATE_DIR:

    $ oc env dc/router --list
    
    DEFAULT_CERTIFICATE_DIR=/etc/pki/tls/private

    If not, create the directory using the following command:

    $ oc env dc/router DEFAULT_CERTIFICATE_DIR=/etc/pki/tls/private
  3. Export the certificate to PEM format:

    $ cat custom-router.key custom-router.crt custom-ca.crt > custom-router.crt
  4. Overwrite or create a router certificate secret:

    If the certificate secret was added to the router, overwrite the secret. If not, create a new secret.

    To overwrite the secret, run the following command:

    $ oc secrets new router-certs tls.crt=custom-router.crt tls.key=custom-router.key -o json --type='kubernetes.io/tls' --confirm | oc replace -f -

    To create a new secret, run the following commands:

    $ oc secrets new router-certs tls.crt=custom-router.crt tls.key=custom-router.key --type='kubernetes.io/tls' --confirm
    
    $ oc volume dc/router --add --mount-path=/etc/pki/tls/private --secret-name='router-certs' --name router-certs
  5. Deploy the router.

    $ oc rollout latest dc/router

Using Secured Routes

Currently, password protected key files are not supported. HAProxy prompts for a password upon starting and does not have a way to automate this process. To remove a passphrase from a keyfile, you can run:

# openssl rsa -in <passwordProtectedKey.key> -out <new.key>

Here is an example of how to use a secure edge terminated route with TLS termination occurring on the router before traffic is proxied to the destination. The secure edge terminated route specifies the TLS certificate and key information. The TLS certificate is served by the router front end.

First, start up a router instance:

# oc adm router --replicas=1 --service-account=router

Next, create a private key, csr and certificate for our edge secured route. The instructions on how to do that would be specific to your certificate authority and provider. For a simple self-signed certificate for a domain named www.example.test, see the example shown below:

# sudo openssl genrsa -out example-test.key 2048
#
# sudo openssl req -new -key example-test.key -out example-test.csr  \
  -subj "/C=US/ST=CA/L=Mountain View/O=OS3/OU=Eng/CN=www.example.test"
#
# sudo openssl x509 -req -days 366 -in example-test.csr  \
      -signkey example-test.key -out example-test.crt

Generate a route using the above certificate and key.

$ oc create route edge --service=my-service \
    --hostname=www.example.test \
    --key=example-test.key --cert=example-test.crt
route "my-service" created

Look at its definition.

$ oc get route/my-service -o yaml
apiVersion: v1
kind: Route
metadata:
  name:  my-service
spec:
  host: www.example.test
  to:
    kind: Service
    name: my-service
  tls:
    termination: edge
    key: |
      -----BEGIN PRIVATE KEY-----
      [...]
      -----END PRIVATE KEY-----
    certificate: |
      -----BEGIN CERTIFICATE-----
      [...]
      -----END CERTIFICATE-----

Make sure your DNS entry for www.example.test points to your router instance(s) and the route to your domain should be available. The example below uses curl along with a local resolver to simulate the DNS lookup:

# routerip="4.1.1.1"  #  replace with IP address of one of your router instances.
# curl -k --resolve www.example.test:443:$routerip https://www.example.test/

Using Wildcard Routes (for a Subdomain)

The HAProxy router has support for wildcard routes, which are enabled by setting the ROUTER_ALLOW_WILDCARD_ROUTES environment variable to true. Any routes with a wildcard policy of Subdomain that pass the router admission checks will be serviced by the HAProxy router. Then, the HAProxy router exposes the associated service (for the route) per the route’s wildcard policy.

To change a route’s wildcard policy, you must remove the route and recreate it with the updated wildcard policy. Editing only the route’s wildcard policy in a route’s .yaml file does not work.

$ oc adm router --replicas=0 ...
$ oc set env dc/router ROUTER_ALLOW_WILDCARD_ROUTES=true
$ oc scale dc/router --replicas=1
Using a Secure Wildcard Edge Terminated Route

This example reflects TLS termination occurring on the router before traffic is proxied to the destination. Traffic sent to any hosts in the subdomain example.org (*.example.org) is proxied to the exposed service.

The secure edge terminated route specifies the TLS certificate and key information. The TLS certificate is served by the router front end for all hosts that match the subdomain (*.example.org).

  1. Start up a router instance:

    $ oc adm router --replicas=0 --service-account=router
    $ oc set env dc/router ROUTER_ALLOW_WILDCARD_ROUTES=true
    $ oc scale dc/router --replicas=1
  2. Create a private key, certificate signing request (CSR), and certificate for the edge secured route.

    The instructions on how to do this are specific to your certificate authority and provider. For a simple self-signed certificate for a domain named *.example.test, see this example:

    # sudo openssl genrsa -out example-test.key 2048
    #
    # sudo openssl req -new -key example-test.key -out example-test.csr  \
      -subj "/C=US/ST=CA/L=Mountain View/O=OS3/OU=Eng/CN=*.example.test"
    #
    # sudo openssl x509 -req -days 366 -in example-test.csr  \
          -signkey example-test.key -out example-test.crt
  3. Generate a wildcard route using the above certificate and key:

    $ cat > route.yaml  <<REOF
    apiVersion: v1
    kind: Route
    metadata:
      name:  my-service
    spec:
      host: www.example.test
      wildcardPolicy: Subdomain
      to:
        kind: Service
        name: my-service
      tls:
        termination: edge
        key: "$(perl -pe 's/\n/\\n/' example-test.key)"
        certificate: "$(perl -pe 's/\n/\\n/' example-test.cert)"
    REOF
    $ oc create -f route.yaml

    Ensure your DNS entry for *.example.test points to your router instance(s) and the route to your domain is available.

    This example uses curl with a local resolver to simulate the DNS lookup:

    # routerip="4.1.1.1"  #  replace with IP address of one of your router instances.
    # curl -k --resolve www.example.test:443:$routerip https://www.example.test/
    # curl -k --resolve abc.example.test:443:$routerip https://abc.example.test/
    # curl -k --resolve anyname.example.test:443:$routerip https://anyname.example.test/

For routers that allow wildcard routes (ROUTER_ALLOW_WILDCARD_ROUTES set to true), there are some caveats to the ownership of a subdomain associated with a wildcard route.

Prior to wildcard routes, ownership was based on the claims made for a host name with the namespace with the oldest route winning against any other claimants. For example, route r1 in namespace ns1 with a claim for one.example.test would win over another route r2 in namespace ns2 for the same host name one.example.test if route r1 was older than route r2.

In addition, routes in other namespaces were allowed to claim non-overlapping hostnames. For example, route rone in namespace ns1 could claim www.example.test and another route rtwo in namespace d2 could claim c3po.example.test.

This is still the case if there are no wildcard routes claiming that same subdomain (example.test in the above example).

However, a wildcard route needs to claim all of the host names within a subdomain (host names of the form \*.example.test). A wildcard route’s claim is allowed or denied based on whether or not the oldest route for that subdomain (example.test) is in the same namespace as the wildcard route. The oldest route can be either a regular route or a wildcard route.

For example, if there is already a route eldest that exists in the ns1 namespace that claimed a host named owner.example.test and, if at a later point in time, a new wildcard route wildthing requesting for routes in that subdomain (example.test) is added, the claim by the wildcard route will only be allowed if it is the same namespace (ns1) as the owning route.

The following examples illustrate various scenarios in which claims for wildcard routes will succeed or fail.

In the example below, a router that allows wildcard routes will allow non-overlapping claims for hosts in the subdomain example.test as long as a wildcard route has not claimed a subdomain.

$ oc adm router ...
$ oc set env dc/router
$ oc project ns1 ROUTER_ALLOW_WILDCARD_ROUTES=true

$ oc project ns1
$ oc expose service myservice --hostname=owner.example.test
$ oc expose service myservice --hostname=aname.example.test
$ oc expose service myservice --hostname=bname.example.test

$ oc project ns2
$ oc expose service anotherservice --hostname=second.example.test
$ oc expose service anotherservice --hostname=cname.example.test

$ oc project otherns
$ oc expose service thirdservice --hostname=emmy.example.test
$ oc expose service thirdservice --hostname=webby.example.test

In the example below, a router that allows wildcard routes will not allow the claim for owner.example.test or aname.example.test to succeed since the owning namespace is ns1.

$ oc adm router ...
$ oc set env dc/router ROUTER_ALLOW_WILDCARD_ROUTES=true

$ oc project ns1
$ oc expose service myservice --hostname=owner.example.test
$ oc expose service myservice --hostname=aname.example.test

$ oc project ns2
$ oc expose service secondservice --hostname=bname.example.test
$ oc expose service secondservice --hostname=cname.example.test

$ # Router will not allow this claim with a different path name `/p1` as
$ # namespace `ns1` has an older route claiming host `aname.example.test`.
$ oc expose service secondservice --hostname=aname.example.test --path="/p1"

$ # Router will not allow this claim as namespace `ns1` has an older route
$ # claiming host name `owner.example.test`.
$ oc expose service secondservice --hostname=owner.example.test

$ oc project otherns

$ # Router will not allow this claim as namespace `ns1` has an older route
$ # claiming host name `aname.example.test`.
$ oc expose service thirdservice --hostname=aname.example.test

In the example below, a router that allows wildcard routes will allow the claim for `\*.example.test to succeed since the owning namespace is ns1 and the wildcard route belongs to that same namespace.

$ oc adm router ...
$ oc set env dc/router ROUTER_ALLOW_WILDCARD_ROUTES=true

$ oc project ns1
$ oc expose service myservice --hostname=owner.example.test

$ # Reusing the route.yaml from the previous example.
$ # spec:
$ #   host: www.example.test
$ #   wildcardPolicy: Subdomain

$ oc create -f route.yaml   #  router will allow this claim.

In the example below, a router that allows wildcard routes will not allow the claim for `\*.example.test to succeed since the owning namespace is ns1 and the wildcard route belongs to another namespace cyclone.

$ oc adm router ...
$ oc set env dc/router
$ oc project ns1 ROUTER_ALLOW_WILDCARD_ROUTES=true

$ oc project ns1
$ oc expose service myservice --hostname=owner.example.test

$ # Switch to a different namespace/project.
$ oc project cyclone

$ # Reusing the route.yaml from a prior example.
$ # spec:
$ #   host: www.example.test
$ #   wildcardPolicy: Subdomain

$ oc create -f route.yaml   #  router will deny (_NOT_ allow) this claim.

Similarly, once a namespace with a wildcard route claims a subdomain, only routes within that namespace can claim any hosts in that same subdomain.

In the example below, once a route in namespace ns1 with a wildcard route claims subdomain example.test, only routes in the namespace ns1 are allowed to claim any hosts in that same subdomain.

$ oc adm router ...
$ oc set env dc/router
$ oc project ns1 ROUTER_ALLOW_WILDCARD_ROUTES=true

$ oc project ns1
$ oc expose service myservice --hostname=owner.example.test

$ oc project otherns

$ # namespace `otherns` is allowed to claim for other.example.test
$ oc expose service otherservice --hostname=other.example.test

$ oc project ns1

$ # Reusing the route.yaml from the previous example.
$ # spec:
$ #   host: www.example.test
$ #   wildcardPolicy: Subdomain

$ oc create -f route.yaml   #  Router will allow this claim.

$ #  In addition, route in namespace otherns will lose its claim to host
$ #  `other.example.test` due to the wildcard route claiming the subdomain.

$ # namespace `ns1` is allowed to claim for deux.example.test
$ oc expose service mysecondservice --hostname=deux.example.test

$ # namespace `ns1` is allowed to claim for deux.example.test with path /p1
$ oc expose service mythirdservice --hostname=deux.example.test --path="/p1"

$ oc project otherns

$ # namespace `otherns` is not allowed to claim for deux.example.test
$ # with a different path '/otherpath'
$ oc expose service otherservice --hostname=deux.example.test --path="/otherpath"

$ # namespace `otherns` is not allowed to claim for owner.example.test
$ oc expose service yetanotherservice --hostname=owner.example.test

$ # namespace `otherns` is not allowed to claim for unclaimed.example.test
$ oc expose service yetanotherservice --hostname=unclaimed.example.test

In the example below, different scenarios are shown, in which the owner routes are deleted and ownership is passed within and across namespaces. While a route claiming host eldest.example.test in the namespace ns1 exists, wildcard routes in that namespace can claim subdomain example.test. When the route for host eldest.example.test is deleted, the next oldest route senior.example.test would become the oldest route and would not affect any other routes. Once the route for host senior.example.test is deleted, the next oldest route junior.example.test becomes the oldest route and block the wildcard route claimant.

$ oc adm router ...
$ oc set env dc/router
$ oc project ns1 ROUTER_ALLOW_WILDCARD_ROUTES=true

$ oc project ns1
$ oc expose service myservice --hostname=eldest.example.test
$ oc expose service seniorservice --hostname=senior.example.test

$ oc project otherns

$ # namespace `otherns` is allowed to claim for other.example.test
$ oc expose service juniorservice --hostname=junior.example.test

$ oc project ns1

$ # Reusing the route.yaml from the previous example.
$ # spec:
$ #   host: www.example.test
$ #   wildcardPolicy: Subdomain

$ oc create -f route.yaml   #  Router will allow this claim.

$ #  In addition, route in namespace otherns will lose its claim to host
$ #  `junior.example.test` due to the wildcard route claiming the subdomain.

$ # namespace `ns1` is allowed to claim for dos.example.test
$ oc expose service mysecondservice --hostname=dos.example.test

$ # Delete route for host `eldest.example.test`, the next oldest route is
$ # the one claiming `senior.example.test`, so route claims are unaffacted.
$ oc delete route myservice

$ # Delete route for host `senior.example.test`, the next oldest route is
$ # the one claiming `junior.example.test` in another namespace, so claims
$ # for a wildcard route would be affected. The route for the host
$ # `dos.example.test` would be unaffected as there are no other wildcard
$ # claimants blocking it.
$ oc delete route seniorservice

Using the Container Network Stack

The OpenShift Container Platform router runs inside a container and the default behavior is to use the network stack of the host (i.e., the node where the router container runs). This default behavior benefits performance because network traffic from remote clients does not need to take multiple hops through user space to reach the target service and container.

Additionally, this default behavior enables the router to get the actual source IP address of the remote connection rather than getting the node’s IP address. This is useful for defining ingress rules based on the originating IP, supporting sticky sessions, and monitoring traffic, among other uses.

This host network behavior is controlled by the --host-network router command line option, and the default behaviour is the equivalent of using --host-network=true. If you wish to run the router with the container network stack, use the --host-network=false option when creating the router. For example:

$ oc adm router --service-account=router --host-network=false

Internally, this means the router container must publish the 80 and 443 ports in order for the external network to communicate with the router.

Running with the container network stack means that the router sees the source IP address of a connection to be the NATed IP address of the node, rather than the actual remote IP address.

On OpenShift Container Platform clusters using multi-tenant network isolation, routers on a non-default namespace with the --host-network=false option will load all routes in the cluster, but routes across the namespaces will not be reachable due to network isolation. With the --host-network=true option, routes bypass the container network and it can access any pod in the cluster. If isolation is needed in this case, then do not add routes across the namespaces.

Exposing Router Metrics

The HAProxy router metrics are, by default, exposed or published in Prometheus format for consumption by external metrics collection and aggregation systems (e.g. Prometheus, statsd). Metrics are also available directly from the HAProxy router in its own HTML format for viewing in a browser or CSV download. These metrics include the HAProxy native metrics and some controller metrics.

When you create a router using the following command, OpenShift Container Platform makes metrics available in Prometheus format on the stats port, by default 1936.

$ oc adm router --service-account=router
  • To extract the raw statistics in Prometheus format run the following command:

    curl <user>:<password>@<router_IP>:<STATS_PORT>

    For example:

    $ curl admin:sLzdR6SgDJ@10.254.254.35:1936/metrics

    You can get the information you need to access the metrics from the router service annotations:

    $ oc edit router service <router-service-name>
    
    apiVersion: v1
    kind: Service
    metadata:
      annotations:
        prometheus.io/port: "1936"
        prometheus.io/scrape: "true"
        prometheus.openshift.io/password: IImoDqON02
        prometheus.openshift.io/username: admin

    The prometheus.io/port is the stats port, by default 1936. You might need to configure your firewall to permit access. Use the previous user name and password to access the metrics. The path is /metrics.

    $ curl <user>:<password>@<router_IP>:<STATS_PORT>
    for example:
    $ curl admin:sLzdR6SgDJ@10.254.254.35:1936/metrics
    ...
    # HELP haproxy_backend_connections_total Total number of connections.
    # TYPE haproxy_backend_connections_total gauge
    haproxy_backend_connections_total{backend="http",namespace="default",route="hello-route"} 0
    haproxy_backend_connections_total{backend="http",namespace="default",route="hello-route-alt"} 0
    haproxy_backend_connections_total{backend="http",namespace="default",route="hello-route01"} 0
    ...
    # HELP haproxy_exporter_server_threshold Number of servers tracked and the current threshold value.
    # TYPE haproxy_exporter_server_threshold gauge
    haproxy_exporter_server_threshold{type="current"} 11
    haproxy_exporter_server_threshold{type="limit"} 500
    ...
    # HELP haproxy_frontend_bytes_in_total Current total of incoming bytes.
    # TYPE haproxy_frontend_bytes_in_total gauge
    haproxy_frontend_bytes_in_total{frontend="fe_no_sni"} 0
    haproxy_frontend_bytes_in_total{frontend="fe_sni"} 0
    haproxy_frontend_bytes_in_total{frontend="public"} 119070
    ...
    # HELP haproxy_server_bytes_in_total Current total of incoming bytes.
    # TYPE haproxy_server_bytes_in_total gauge
    haproxy_server_bytes_in_total{namespace="",pod="",route="",server="fe_no_sni",service=""} 0
    haproxy_server_bytes_in_total{namespace="",pod="",route="",server="fe_sni",service=""} 0
    haproxy_server_bytes_in_total{namespace="default",pod="docker-registry-5-nk5fz",route="docker-registry",server="10.130.0.89:5000",service="docker-registry"} 0
    haproxy_server_bytes_in_total{namespace="default",pod="hello-rc-vkjqx",route="hello-route",server="10.130.0.90:8080",service="hello-svc-1"} 0
    ...
  • To get metrics in a browser:

    1. Delete the following environment variables from the router deployment configuration file:

      $ oc edit dc router
      
      - name: ROUTER_LISTEN_ADDR
        value: 0.0.0.0:1936
      - name: ROUTER_METRICS_TYPE
        value: haproxy
    2. Launch the stats window using the following URL in a browser, where the STATS_PORT value is 1936 by default:

      http://admin:<Password>@<router_IP>:<STATS_PORT>

      You can get the stats in CSV format by adding ;csv to the URL:

      For example:

      http://admin:<Password>@<router_IP>:1936;csv

      To get the router IP, admin name, and password:

      oc describe pod <router_pod>
  • To suppress metrics collection:

    $ oc adm router --service-account=router --stats-port=0

Preventing Connection Failures During Restarts

If you connect to the router while the proxy is reloading, there is a small chance that your connection will end up in the wrong network queue and be dropped. The issue is being addressed. In the meantime, it is possible to work around the problem by installing iptables rules to prevent connections during the reload window. However, doing so means that the router needs to run with elevated privilege so that it can manipulate iptables on the host. It also

means that connections that happen during the reload are temporarily ignored and must retransmit their connection start, lengthening the time it takes to connect, but preventing connection failure.

To prevent this, configure the router to use iptables by changing the service account, and setting an environment variable on the router.

Use a Privileged SCC

When creating the router, allow it to use the privileged SCC. This gives the router user the ability to create containers with root privileges on the nodes:

$ oc adm policy add-scc-to-user privileged -z router

Patch the Router Deployment Configuration to Create a Privileged Container

You can now create privileged containers. Next, configure the router deployment configuration to use the privilege so that the router can set the iptables rules it needs. This patch changes the router deployment configuration so that the container that is created runs as privileged (and therefore gets correct capabilities) and run as root:

$ oc patch dc router -p '{"spec":{"template":{"spec":{"containers":[{"name":"router","securityContext":{"privileged":true}}],"securityContext":{"runAsUser": 0}}}}}'

Configure the Router to Use iptables

Set the option on the router deployment configuration:

$ oc set env dc/router -c router DROP_SYN_DURING_RESTART=true

If you used a non-default name for the router, you must change dc/router accordingly.

ARP Cache Tuning for Large-scale Clusters

In OpenShift Container Platform clusters with large numbers of routes (greater than the value of net.ipv4.neigh.default.gc_thresh3, which is 65536 by default), you must increase the default values of sysctl variables on each node in the cluster running the router pod to allow more entries in the ARP cache.

When the problem is occuring, the kernel messages would be similar to the following:

[ 1738.811139] net_ratelimit: 1045 callbacks suppressed
[ 1743.823136] net_ratelimit: 293 callbacks suppressed

When this issue occurs, the oc commands might start to fail with the following error:

Unable to connect to the server: dial tcp: lookup <hostname> on <ip>:<port>: write udp <ip>:<port>-><ip>:<port>: write: invalid argument

To verify the actual amount of ARP entries for IPv4, run the following:

# ip -4 neigh show nud all | wc -l

If the number begins to approach the net.ipv4.neigh.default.gc_thresh3 threshold, increase the values. Get the current value by running:

# sysctl net.ipv4.neigh.default.gc_thresh1
net.ipv4.neigh.default.gc_thresh1 = 128
# sysctl net.ipv4.neigh.default.gc_thresh2
net.ipv4.neigh.default.gc_thresh2 = 512
# sysctl net.ipv4.neigh.default.gc_thresh3
net.ipv4.neigh.default.gc_thresh3 = 1024

The following sysctl sets the variables to the OpenShift Container Platform current default values.

# sysctl net.ipv4.neigh.default.gc_thresh1=8192
# sysctl net.ipv4.neigh.default.gc_thresh2=32768
# sysctl net.ipv4.neigh.default.gc_thresh3=65536

To make these settings permanent, see this document.

Protecting Against DDoS Attacks

Add timeout http-request to the default HAProxy router image to protect the deployment against distributed denial-of-service (DDoS) attacks (for example, slowloris):

# and the haproxy stats socket is available at /var/run/haproxy.stats
global
  stats socket ./haproxy.stats level admin

defaults
  option http-server-close
  mode http
  timeout http-request 5s
  timeout connect 5s (1)
  timeout server 10s
  timeout client 30s
1 timeout http-request is set up to 5 seconds. HAProxy gives a client 5 seconds *to send its whole HTTP request. Otherwise, HAProxy shuts the connection with *an error.

Also, when the environment variable ROUTER_SLOWLORIS_TIMEOUT is set, it limits the amount of time a client has to send the whole HTTP request. Otherwise, HAProxy will shut down the connection.

Setting the environment variable allows information to be captured as part of the router’s deployment configuration and does not require manual modification of the template, whereas manually adding the HAProxy setting requires you to rebuild the router pod and maintain your router template file.

Using annotations implements basic DDoS protections in the HAProxy template router, including the ability to limit the:

  • number of concurrent TCP connections

  • rate at which a client can request TCP connections

  • rate at which HTTP requests can be made

These are enabled on a per route basis because applications can have extremely different traffic patterns.

Table 1. HAProxy Template Router Settings
Setting Description

haproxy.router.openshift.io/rate-limit-connections

Enables the settings be configured (when set to true, for example).

haproxy.router.openshift.io/rate-limit-connections.concurrent-tcp

The number of concurrent TCP connections that can be made by the same IP address on this route.

haproxy.router.openshift.io/rate-limit-connections.rate-tcp

The number of TCP connections that can be opened by a client IP.

haproxy.router.openshift.io/rate-limit-connections.rate-http

The number of HTTP requests that a client IP can make in a 3-second period.