Routes

An OpenShift Container Platform route exposes a service at a host name, like www.example.com, so that external clients can reach it by name.

DNS resolution for a host name is handled separately from routing. Your administrator may have configured a DNS wildcard entry that will resolve to the OpenShift Container Platform node that is running the OpenShift Container Platform router. If you are using a different host name you may need to modify its DNS records independently to resolve to the node that is running the router.

Each route consists of a name (limited to 63 characters), a service selector, and an optional security configuration.

An OpenShift Container Platform administrator can deploy routers to nodes in an OpenShift Container Platform cluster, which enable routes created by developers to be used by external clients. The routing layer in OpenShift Container Platform is pluggable, and two available router plug-ins are provided and supported by default.

A router uses the service selector to find the service and the endpoints backing the service. When both router and service provide load balancing, OpenShift Container Platform uses the router load balancing. A router detects relevant changes in the IP addresses of its services and adapts its configuration accordingly. This is useful for custom routers to communicate modifications of API objects to an external routing solution.

The path of a request starts with the DNS resolution of a host name to one or more routers. The suggested method is to define a cloud domain with a wildcard DNS entry pointing to one or more virtual IP (VIP) addresses backed by multiple router instances. Routes using names and addresses outside the cloud domain require configuration of individual DNS entries.

When there are fewer VIP addresses than routers, the routers corresponding to the number of addresses are active and the rest are passive. A passive router is also known as a hot-standby router. For example, with two VIP addresses and three routers, you have an "active-active-passive" configuration. See High Availability for more information on router VIP configuration.

Routes can be sharded among the set of routers. Administrators can set up sharding on a cluster-wide basis and users can set up sharding for the namespace in their project. Sharding allows the operator to define multiple router groups. Each router in the group serves only a subset of traffic.

OpenShift Container Platform routers provide external host name mapping and load balancing of service end points over protocols that pass distinguishing information directly to the router; the host name must be present in the protocol in order for the router to determine where to send it.

Router plug-ins assume they can bind to host ports 80 (HTTP) and 443 (HTTPS), by default. This means that routers must be placed on nodes where those ports are not otherwise in use. Alternatively, a router can be configured to listen on other ports by setting the ROUTER_SERVICE_HTTP_PORT and ROUTER_SERVICE_HTTPS_PORT environment variables.

Because a router binds to ports on the host node, only one router listening on those ports can be on each node if the router uses host networking (the default). Cluster networking is configured such that all routers can access all pods in the cluster.

Routers support the following protocols:

The following router plug-ins are provided and supported in OpenShift Container Platform. Instructions on deploying these routers are available in Deploying a Router.

For all the items outlined in this section, you can set environment variables in the deployment config for the router to alter its configuration, or use the oc set env command:

For example:

TimeUnits are represented by a number followed by the unit: us *(microseconds), ms (milliseconds, default), s (seconds), m (minutes), h *(hours), d (days).

The regular expression is: [1-9][0-9]*(us\|ms\|s\|m\|h\|d)

When a route has multiple endpoints, HAProxy distributes requests to the route among the endpoints based on the selected load-balancing strategy. This applies when no persistence information is available, such as on the first request in a session.

The strategy can be one of the following:

The ROUTER_TCP_BALANCE_SCHEME environment variable sets the default for passthorugh routes. The ROUTER_LOAD_BALANCE_ALGORITHM environment variable sets the default strategy for the router for the remaining routes. A route specific annotation, haproxy.router.openshift.io/balance may be use to control specific routes.

By default, when a host does not resolve to a route in a HTTPS or TLS SNI request, the default certificate is returned to the caller as part of the 503 response. This exposes the default certificate and can pose security concerns because the wrong certificate is served for a site. The HAProxy strict-sni option to bind suppresses use of the default certificate.

The ROUTER_STRICT_SNI environment variable controls bind processing. When set to true or TRUE, strict-sni is added to the HAProxy bind. The default setting is false.

The option can be set when the router is created or added later.

This sets ROUTER_STRICT_SNI=true.

In order for services to be exposed externally, an OpenShift Container Platform route allows you to associate a service with an externally-reachable host name. This edge host name is then used to route traffic to the service.

When multiple routes from different namespaces claim the same host, the oldest route wins and claims it for the namespace. If additional routes with different path fields are defined in the same namespace, those paths are added. If multiple routes with the same path are used, the oldest takes priority.

A consequence of this behavior is that if you have two routes for a host name: an older one and a newer one. If someone else has a route for the same host name that they created between when you created the other two routes, then if you delete your older route, your claim to the host name will no longer be in effect. The other namespace now claims the host name and your claim is lost.

If a host name is not provided as part of the route definition, then OpenShift Container Platform automatically generates one for you. The generated host name is of the form:

The following example shows the OpenShift Container Platform-generated host name for the above configuration of a route without a host added to a namespace mynamespace:

A cluster administrator can also customize the suffix used as the default routing subdomain for their environment.

Routes can be either secured or unsecured. Secure routes provide the ability to use several types of TLS termination to serve certificates to the client. Routers support edge, passthrough, and re-encryption termination.

Unsecured routes are simplest to configure, as they require no key or certificates, but secured routes offer security for connections to remain private.

A secured route is one that specifies the TLS termination of the route. The available types of termination are described below.

Path based routes specify a path component that can be compared against a URL (which requires that the traffic for the route be HTTP based) such that multiple routes can be served using the same host name, each with a different path. Routers should match routes based on the most specific path to the least; however, this depends on the router implementation. The following table shows example routes and their accessibility:

Secured routes specify the TLS termination of the route and, optionally, provide a key and certificate(s).

Secured routes can use any of the following three types of secure TLS termination.

Edge Termination

With edge termination, TLS termination occurs at the router, prior to proxying traffic to its destination. TLS certificates are served by the front end of the router, so they must be configured into the route, otherwise the router’s default certificate will be used for TLS termination.

Because TLS is terminated at the router, connections from the router to the endpoints over the internal network are not encrypted.

Edge-terminated routes can specify an insecureEdgeTerminationPolicy that enables traffic on insecure schemes (HTTP) to be disabled, allowed or redirected. The allowed values for insecureEdgeTerminationPolicy are: None or empty (for disabled), Allow or Redirect. The default insecureEdgeTerminationPolicy is to disable traffic on the insecure scheme. A common use case is to allow content to be served via a secure scheme but serve the assets (example images, stylesheets and javascript) via the insecure scheme.

Passthrough Termination

With passthrough termination, encrypted traffic is sent straight to the destination without the router providing TLS termination. Therefore no key or certificate is required.

The destination pod is responsible for serving certificates for the traffic at the endpoint. This is currently the only method that can support requiring client certificates (also known as two-way authentication).

Re-encryption Termination

Re-encryption is a variation on edge termination where the router terminates TLS with a certificate, then re-encrypts its connection to the endpoint which may have a different certificate. Therefore the full path of the connection is encrypted, even over the internal network. The router uses health checks to determine the authenticity of the host.

In OpenShift Container Platform, each route can have any number of labels in its metadata field. A router uses selectors (also known as a selection expression) to select a subset of routes from the entire pool of routes to serve. A selection expression can also involve labels on the route’s namespace. The selected routes form a router shard. You can create and modify router shards independently from the routes, themselves.

This design supports traditional sharding as well as overlapped sharding. In traditional sharding, the selection results in no overlapping sets and a route belongs to exactly one shard. In overlapped sharding, the selection results in overlapping sets and a route can belong to many different shards. For example, a single route may belong to a SLA=high shard (but not SLA=medium or SLA=low shards), as well as a geo=west shard (but not a geo=east shard).

Another example of overlapped sharding is a set of routers that select based on namespace of the route:

Both router-2 and router-3 serve routes that are in the namespaces Q*, R*, S*, T*. To change this example from overlapped to traditional sharding, we could change the selection of router-2 to K* — P*, which would eliminate the overlap.

When routers are sharded, a given route is bound to zero or more routers in the group. The route binding ensures uniqueness of the route across the shard. Uniqueness allows secure and non-secure versions of the same route to exist within a single shard. This implies that routes now have a visible life cycle that moves from created to bound to active.

In the sharded environment the first route to hit the shard reserves the right to exist there indefinitely, even across restarts.

During a green/blue deployment a route may be be selected in multiple routers. An OpenShift Container Platform application administrator may wish to bleed traffic from one version of the application to another and then turn off the old version.

Sharding can be done by the administrator at a cluster level and by the user at a project/namespace level. When namespace labels are used, the service account for the router must have cluster-reader permission to permit the router to access the labels in the namespace.

Using environment variables, a router can set the default options for all the routes it exposes. An individual route can override some of these defaults by providing specific configurations in its annotations.

Route Annotations

For all the items outlined in this section, you can set annotations on the route definition for the route to alter its configuration

A wildcard policy allows a user to define a route that covers all hosts within a domain (when the router is configured to allow it). A route can specify a wildcard policy as part of its configuration using the wildcardPolicy field. Any routers run with a policy allowing wildcard routes will expose the route appropriately based on the wildcard policy.

Learn how to configure HAProxy routers to allow wildcard routes.

The route status field is only set by routers. If changes are made to a route so that a router no longer serves a specific route, the status becomes stale. The routers do not clear the route status field. To remove the stale entries in the route status, use the clear-route-status script.

A router can be configured to deny or allow a specific subset of domains from the host names in a route using the ROUTER_DENIED_DOMAINS and ROUTER_ALLOWED_DOMAINS environment variables.

The domains in the list of denied domains take precedence over the list of allowed domains. Meaning OpenShift Container Platform first checks the deny list (if applicable), and if the host name is not in the list of denied domains, it then checks the list of allowed domains. However, the list of allowed domains is more restrictive, and ensures that the router only admits routes with hosts that belong to that list.

For example, to deny the [*.]open.header.test, [*.]openshift.org and [*.]block.it routes for the myrouter route:

This means that myrouter will admit the following based on the route’s name:

However, myrouter will deny the following:

Alternatively, to block any routes where the host name is not set to [*.]stickshift.org or [*.]kates.net:

This means that the myrouter router will admit:

However, myrouter will deny the following:

To implement both scenarios, run:

This will allow any routes where the host name is set to [*.]openshift.org or [*.]kates.net, and not allow any routes where the host name is set to [*.]ops.openshift.org or [*.]metrics.kates.net.

Therefore, the following will be denied:

However, the following will be allowed:

Hosts and subdomains are owned by the namespace of the route that first makes the claim. Other routes created in the namespace can make claims on the subdomain. All other namespaces are prevented from making claims on the claimed hosts and subdomains. The namespace that owns the host also owns all paths associated with the host, for example www.abc.xyz/path1.

For example, if the host www.abc.xyz is not claimed by any route. Creating route r1 with host www.abc.xyz in namespace ns1 makes namespace ns1 the owner of host www.abc.xyz and subdomain abc.xyz for wildcard routes. If another namespace, ns2, tries to create a route with say a different path www.abc.xyz/path1/path2, it would fail because a route in another namespace (ns1 in this case) owns that host.

With wildcard routes the namespace that owns the subdomain owns all hosts in the subdomain. If a namespace owns subdomain abc.xyz as in the above example, another namespace cannot claim z.abc.xyz.

By disabling the namespace ownership rules, you can disable these restrictions and allow hosts (and subdomains) to be claimed across namespaces.

For example, with ROUTER_DISABLE_NAMESPACE_OWNERSHIP_CHECK=true, if namespace ns1 creates the oldest route r1 www.abc.xyz, it owns only the hostname (+ path). Another namespace can create a wildcard route even though it does not have the oldest route in that subdomain (abc.xyz) and we could potentially have other namespaces claiming other non-wildcard overlapping hosts (for example, foo.abc.xyz, bar.abc.xyz, baz.abc.xyz) and their claims would be granted.

Any other namespace (for example, ns2) can now create a route r2 www.abc.xyz/p1/p2, and it would be admitted. Similarly another namespace (ns3) can also create a route wildthing.abc.xyz with a subdomain wildcard policy and it can own the wildcard.

As this example demonstrates, the policy ROUTER_DISABLE_NAMESPACE_OWNERSHIP_CHECK=true is more lax and allows claims across namespaces. The only time the router would reject a route with the namespace ownership disabled is if the host+path is already claimed.

For example, if a new route rx tries to claim www.abc.xyz/p1/p2, it would be rejected as route r2 owns that host+path combination. This is true whether route rx is in the same namespace or other namespace since the exact host+path is already claimed.

This feature can be set during router creation or by setting an environment variable in the router’s deployment configuration.